Abstract
SiO x /TiO y /C z H t composite coatings were deposited on papers by magnetron co-sputtering. Influences of RF power on structures and properties of coatings were investigated. The result from SEM applied to investigate the microstructure showed that coatings could be prepared with good capillary structure as suitable input powers, which helped to get a good printability for papers. Raman test results showed that different input power ratios could be applied to deposit coatings with modifiable inorganic and organic components.
This is a preview of subscription content, log in via an institution to check access.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Wu YM, Duan HD, Yu YQ, Zhang CG (2001) Preparation and performance in paper coating of silicone-modified styrene–butyl acrylate copolymer latex. J Appl Polym Sci 79(2):333–336
Lee YK, Kim SG, Won JM, Kim YH (2015) Application technology of environmental-friendly starch-based biobinder and synthesized binder in order to substitute SB latex for paper coating (1)—application of substitute binder for pre-coating layer. J Korea Tech Assoc Pulp Paper Ind 47(5):134–140
Biederman H, Stelmashuk V, Kholodkov I, Choukourov A, SlavÃnská D (2003) RF sputtering of hydrocarbon polymers and their derivatives. Surf Coat Technol 174–175:27–32
Stelmashuk V, Biederman H, SlavÃnská D, Trchová M, Hlidek P (2004) RF magnetron sputtering of polypropylene. Vacuum 75:207–215
Kousal J, Hanus TJ, Choukourov A, HlÃdek P, Biederman H, SlavÃnská D, Zemek J (2005) RF magnetron sputtering and evaporation of polyisobutylene and low density polyethylene. Surf Coat Technol 200:472–475
Drabik M, Kousal J, Pihosh Y, Choukourov A, Biederman H, Slavinska D, Mackova A, Boldyreva A, Pesicka J (2007) Composite SiO x /hydrocarbon plasma polymer films prepared by RF magnetron sputtering of SiO2 and polyimide. Vacuum 81:920–927
Pihosh Y, Biederman H, Slavinska D, Kousal J, Choukourova A, Trchová M, Mackova A, Boldyryeva A (2006) Composite SiO x /fluorocarbon plasma polymer films prepared by r.f. magnetron sputtering of SiO2 and PTFE. Vacuum 81:38–44
Liu Z, Sun ZH, Ma XX, Yang CL (2013) Characterization of composite SiO x /polymer barrier films. Packag Technol Sci 26:70–79
Choudhury S, Sasikala R, Saxena V, Aswal DK, Bhattacharya D (2012) A new route for the fabrication of an ultrathin film of a PdO–TiO2 composite Photocatalyst. Dalton Trans 41:12090–12095
Mélinon P, Kéghélian P, Prével B, Dupuis V, Perez A (1998) Structural, vibrational, and optical properties of silicon cluster assembled films. J Chem Phys 108(11):4607–4613
Acknowledgements
This research was supported by the Natural Science Foundation of Heilongjiang Province (Grant No. E201356), the Natural Science Foundation for Young Scholars of Heilongjiang Province (Grant No. QC2012C008) and the National Science Foundation for Young Scholars of China (Grant No. 51302054).
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2018 Springer Nature Singapore Pte Ltd.
About this paper
Cite this paper
Liu, Z., Zhu, L., Yang, H., Chang, J., Cao, W. (2018). SiO x /TiO y /C z H t Composite Coatings Prepared by Magnetron Co-sputtering on Substrate Paper. In: Zhao, P., Ouyang, Y., Xu, M., Yang, L., Ren, Y. (eds) Applied Sciences in Graphic Communication and Packaging. Lecture Notes in Electrical Engineering, vol 477. Springer, Singapore. https://doi.org/10.1007/978-981-10-7629-9_72
Download citation
DOI: https://doi.org/10.1007/978-981-10-7629-9_72
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-10-7628-2
Online ISBN: 978-981-10-7629-9
eBook Packages: EngineeringEngineering (R0)