Abstract
There are lots of difficult problems on deep well drilling of Shuangyushi structure in Western Sichuan region, such as shallow leakage, variation of high–low pressure, fault development, indeterminacy on high-pressure brine, and poor drillability in some formation, seriously affected the drilling cycle. In order to decrease the downhole accidents and improve the drilling speed, this article has carried out a series of safety and fast drilling technology research and application, including optimization of wellbore structure to realize the geological target, optimization of drilling methods, the bits, and so on. Through using these technologies, great achievement was obtained. This study is of great significance for safety production and for cost decreasing and benefit increasing in deep well drilling of Western Sichuan region.
Copyright 2017, Shaanxi Petroleum Society.
This paper was prepared for presentation at the 2017 International Petroleum and Petrochemical Technology Conference in Beijing, China, 20–22 March, 2017.
This paper was selected for presentation by the IFEDC&IPPTC Committee following review of information contained in an abstract submitted by the author(s). Contents of the paper, as presented, have not been reviewed by the IFEDC&IPPTC Committee and are subject to correction by the author(s). The material does not necessarily reflect any position of the IFEDC&IPPTC Committee, its members. Papers presented at the Conference are subject to publication review by Professional Committee of Petroleum Engineering of Shaanxi Petroleum Society. Electronic reproduction, distribution, or storage of any part of this paper for commercial purposes without the written consent of Shaanxi Petroleum Society is prohibited. Permission to reproduce in print is restricted to an abstract of not more than 300 words; illustrations may not be copied. The abstract must contain conspicuous acknowledgment of IFEDC&IPPTC. Contact email: paper@ifedc.org or paper@ipptc.org.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
He L, Zhu L, Ou B et al (2015) Third spud section drilling technology and pilot test for Xu-2 deep well in West Sichuan. Oil Drill Prod Technol 2:16–18
Gao D, Wang Q, Li W et al (2015) Design and application of unconventional casing program in deep wells, Western Sichuan basin: A case study of well Long 004-X1 in the Jiulongshan structure. Nat Gas Ind 35(4):82–87
Shi B, Ou B, Xu J et al (2011) Analysis and countermeasures of drilling fluid technology in deep wells in Western Sichuan. Fault-Block Oil Gas Field 18(6):799–802
Zhong W, Zhao H, Li J (2004) Discussion on improving drilling efficiency of deep well and deep well in West Sichuan. Petrol Drill Tech 32(6):16–18
Liu B, Zhang S, Yang Z et al (2010) Application technology of drilling fluid for fast drilling in deep and deep wells in Western Sichuan. Nat Gas Ind 30(9):65–68
Chen Y, Wang Z, Ye X (2012) Application of fast drilling technology in the Xinshen 1 well of Western Sichuan. Stand Qual Petrol Chem Ind China 32(2):46–47
Xu J, Hu D, Ren M et al (2010) Complex condition and fault prevention and treatment of deep well in West Sichuan. Petrol Drill Tech 38(4):22–25
Jiang Z, Xiao G, Li Q (2010) Technology for improving drilling speed in deep wells in Western Sichuan. Petrol Drill Tech 38(4):30–34
Acknowledgements
Thanks Zhang Fan & Sun Yongxing for the guidance of this paper, thanks the CCDC Drilling & Production Technology Research Institute for funding my project.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2019 Springer Nature Singapore Pte Ltd.
About this paper
Cite this paper
Fulei, W., Zhifa, Z., Bozhong, Y. (2019). The Deep Well Drilling Technique of Shuangyushi Structure in Western Sichuan Region. In: Qu, Z., Lin, J. (eds) Proceedings of the International Field Exploration and Development Conference 2017. Springer Series in Geomechanics and Geoengineering. Springer, Singapore. https://doi.org/10.1007/978-981-10-7560-5_58
Download citation
DOI: https://doi.org/10.1007/978-981-10-7560-5_58
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-10-7559-9
Online ISBN: 978-981-10-7560-5
eBook Packages: EngineeringEngineering (R0)