A Triple Band-Reject Frequency Selective Surface for Broadband Applications

Conference paper
Part of the Lecture Notes in Electrical Engineering book series (LNEE, volume 472)

Abstract

In this paper, a new FSS design as band-reject filter (BRF) has been proposed by means of periodic structures of frequency selective surfaces (FSS) which has been worked for triple-band frequencies. In the proposed design, a single-sided Teflon (PTFE) lossy substrate is incorporated with three elements that led to triple-band (2.45, 3.5 and 5.5 GHz) characteristics. The substrate of dimension of 0.293 λ × 0.293 λ at center frequency and having a dielectric constant of 2.1 has been used. Three patches are designed of different shapes. Element types FSS is used as a band-reject filter for broadband applications which have much greater bandwidth than its band-pass portion. Further, this paper introduced its simulated results and discussion that is realized in CST Microwave studio. The design is intended at the rejection of triple bands 2.45 GHz, 3.5 GHz, and 5.5 GHz which are for Bluetooth, WiMax, and WLAN, respectively.

Keywords

Band-reject filter (BRF) Bluetooth Frequency selective surface (FSS) Triple band WiMax WLAN 

References

  1. 1.
    Chen H-Y, Tao Y (2011) Bandwidth enhancement of a U-slot patch antenna using dual-band frequency-selective surface with double rectangular ring elements. MOTL 53(7):1547–1553Google Scholar
  2. 2.
    Choudhary S, Mewara HS (2015) A band-reject frequency selective surface with stable response for WLAN applications. In: SPACES-2015, Department of ECE, KL UniversityGoogle Scholar
  3. 3.
    Munk BA (2000) Frequency selective surfaces: theory and design. Wiley Interscience, New YorkCrossRefGoogle Scholar
  4. 4.
    Aseri K, Yadav S, Sharma MM (2015) A compact frequency selective surface based band-stop filter for WLAN applications. In: 2015 fifth international conference on communication systems and network technologies. IEEE. ISSN 978-1-4799-1797-6/15.  https://doi.org/10.1109/CSNT.2015.116
  5. 5.
    Mittra R, Chan CH, Cwik T (1988) Techniques for analyzing frequency selective surfaces—a review. IEEE Proc 76:1593–1615Google Scholar
  6. 6.
    Wu TK (1995) Frequency selective surface and grid array. A Wiley Interscience Publication, pp 5–7Google Scholar
  7. 7.
    Das S, Sarkar D, Sarkar PP, Chowdhury SK (2003) Experimental investigation on a polarization independent broadband frequency selective surface. In: Proceedings of national conference held in KIIT, Bhubuneswar, Mar 2003Google Scholar
  8. 8.
    Wu TK et al (1992) Multi ring element FSS for multi band applications. Paper presented at the international IEEE AP-S symposium, ChicagoGoogle Scholar
  9. 9.
    Aseri K, Yadav S (2015) A novel hexagonal shape-based band-stop frequency-selective Kiran surface with multiband applications. Adv Intell Syst Comput 408Google Scholar
  10. 10.
    Srifi MN, Meloui M, Essaaidi M (2010) Rectangular slotted patch antenna for 5–6 GHz applications. Int J Microw Opt Technol 5(2)Google Scholar
  11. 11.
    Yadav S, Peswani B, Choudhury R, Sharma MM (2014) Miniaturized band pass double layered frequency selective surface superstrate for Wi-Max applications. In: 2014 IEEE symposium, ISWTAGoogle Scholar
  12. 12.
    Syed IS, Mohd Jenu MZ (2015) Dual-layer frequency selective surface for wide stop-band applications. In: 2015 IEEE international symposium on antennas and propagation and USNC/URSI national radio science meeting, Vancouver, BC, pp 1270–1271Google Scholar
  13. 13.
    Barton JH, Garcia CR, Berry EA, Salas R, Rumpf RC (2015) 3-D printed all-dielectric frequency selective surface with large bandwidth and field of view. IEEE Trans Antennas Propag 63(3):1032–1039MathSciNetCrossRefMATHGoogle Scholar
  14. 14.
    Cerveny M, Rigelsford JM (2015) An inductive frequency selective surface for use in secure facilities. In: 2015 Loughborough antennas and propagation conference (LAPC), Loughborough, pp 1–4Google Scholar
  15. 15.
    Abdollahvand M, Encinar JA, Forooraghi K, Atlasbaf Z, Page JE (2016) Tri-band FSS for Ku/Ka bands reflector antennas. In: 2016 10th European conference on antennas and propagation (EuCAP), Davos, pp 1–4Google Scholar
  16. 16.
    Rigelsford JM, Benito SM, Vallecchi A (2014) A tri-band inductive frequency selective surface sub-reflector for satellite communications systems. In: The 8th European conference on antennas and propagation (EuCAP 2014), The Hague, pp 898–900Google Scholar
  17. 17.
    Davenport CJ, Rigelsford JM, Zhang J, Altan H (2013) Periodic comb reflection frequency selective surface for interference reduction. In: 2013 Loughborough antennas and propagation conference (LAPC), Loughborough, pp 615–618Google Scholar

Copyright information

© Springer Nature Singapore Pte Ltd. 2018

Authors and Affiliations

  1. 1.Government Women Engineering College AjmerAjmerIndia

Personalised recommendations