Advertisement

A Novel Triple Band Pass Frequency Selective Surface for the Proliferation the Performance of WiMax and WLAN 2.5/3.5/5.5 GHz

Conference paper
Part of the Lecture Notes in Electrical Engineering book series (LNEE, volume 472)

Abstract

Among the upcoming wireless technologies, WiMax and WLAN provide soaring speed communication with full coverage. However due to assured factors like path loss, interference, and coverage area led to signal degradation. WiMax and WLAN have used different range of bands. But these bands suffer large path loss, so a band-pass frequency selective surface has been projected in this paper which led to escalation in the transmission of WiMax signal to reduce the effect of path loss. In the proposed design, a single-sided FR-4 substrate is inbuilt with the square and three elements that led to triple-band characteristics at 2.5, 3.5, and 5.5 GHz. The dielectric constant of substrate is 4.4, and dimension of substrate is 0.166 λ × 0.166 λ. Further, this paper has been realized with simulated results in CST Microwave Studio.

Keywords

Three elements Triple-band-pass frequency selective surface (FSS) WiMax and WLAN 2.5, 3.5, and 5.5 GHz band 

References

  1. 1.
    Chen H-Y, Tao Y (2011) Bandwidth enhancement of a U-slot patch antenna using dual-band frequency-selective surface with double rectangular ring elements. MOTL 53(7):1547–1553Google Scholar
  2. 2.
    Yadav S, Peswani B, Sharma MM (2014) A novel band pass double-layered frequency selective superstrate for WLAN applications. In: Confluence, IEEE, pp 447–451Google Scholar
  3. 3.
    Yadav S, Peswani B, Choudhury R, Sharma MM (2014) Miniaturized band pass double layered frequency selective surface superstrate for Wi-Max applications. In: 2014 IEEE symposium, ISWTAGoogle Scholar
  4. 4.
    Qing A, Lee CK (2010) Differential evolution in electromagnetic. Springer, Heidelberg, BerlinCrossRefGoogle Scholar
  5. 5.
    Das S, Sarkar D, Sarkar PP, Chowdhury SK (2003) Experimental investigation on a polarization independent broadband frequency selective surface. In: Proceedings of national conference held in KIIT, Bhubuneswar, Mar 2003Google Scholar
  6. 6.
    Wu TK et al (1992) Multi ring element FSS for multi band applications. Paper presented at the international IEEE AP-S SYMPOSIUM, ChicagoGoogle Scholar
  7. 7.
    Aseri K, Yadav S, Sharma MM (2016) A novel band pass frequency selective surface for the augmentation in the performance of Wi-Max 2.5/3.5 GHz. In: Antenna test and measurement society, 01–03 Feb 2016, Goa, IndiaGoogle Scholar
  8. 8.
    Chatterjee A, Bisas S, Chanda (Sarkar) D, Sarkar PP (2011) A polarization independent compact multi-band frequency selective surface. In: International conference on current trends in technology, NUiCONE 2011Google Scholar
  9. 9.
    Munk BA (2000) Frequency selective surfaces: theory and design. Wiley-Interscience, New YorkCrossRefGoogle Scholar
  10. 10.
    Wu TK (1995) Frequency selective surface and grid array. A Wiley Interscience Publication, New York, pp 5–7Google Scholar
  11. 11.
    Pozar DM (2005) Microwave engineering, 3rd edn. Wiley; Radisic V, Qian Y, Itoh T (1998) Novel 2-D photonic bandgap structure for microstrip lines. IEEE Microw Guided Wave Lett 8(2):69–71Google Scholar
  12. 12.
    Li Y, Jiang H, He L, Li H, Zhang Y, Chen H (2006) Multichanneled filter based on a branchy defect in microstrip photonic crystal. Appl Phys Lett 88:081106. Prog Electromagnet Res Lett 31:53CrossRefGoogle Scholar
  13. 13.
    Ahn D, Park JS, Kim CS, Kim J, Qian Y, Itoh T (2001) A design of the low-pass filter using the novel microstrip defected ground structure. IEEE Trans Microw Theory Technol 49(1):86–93CrossRefGoogle Scholar
  14. 14.
    Falcone F, Lopetegi T, Laso MAG, Baena JD, Bonache J, Beruete M, Marques R, Martin F, Sorolla M (2004) Babinet principle applied to the design of metasurfaces and metamaterials. Phys Rev Lett 93:197401CrossRefGoogle Scholar
  15. 15.
    Kee CS, Jang MY, Park IM, Lim H, Kim JE, Park HY, Lee JI (2002) Photonic band gap formation by microstrip ring: a way to reduce the size of microstrip photonic band gap structures. Appl Phys Lett 80:1520CrossRefGoogle Scholar

Copyright information

© Springer Nature Singapore Pte Ltd. 2018

Authors and Affiliations

  1. 1.Government Women Engineering College AjmerAjmerIndia

Personalised recommendations