Abstract
Resilient tunnel plug is a recently developed technique for the block of flood in tunnel by using an inflatable cylindrical airbag with air concealed. The plug, i.e., air bag surface, itself is made of textile composite with high strength, lightweight and easily foldable. The air plug can be inflated in a short amount of time and aligns with the internal surface of the tunnel tightly so that the fluid will be stopped at the required position. The use of air plug provides new solutions to the response of emergencies and accidents in tunnel operation such as the screening of smoke from fire and flood from precipitation. Recently, the possibility of using the air plug for the rescue of accidents in tunneling construction is being explored. In this paper, the feasibility of utilizing air plug to screen the soil and water flow in case of boring face failure is investigated. Membrane element is used to model the plug, and surface-based fluid modeling based on the Uniform Pressure Method (UPM) is used to model the coupling between the deformation and the pressure of the plug. Surface-to-surface contact interaction is used to model the frictional contact between the tunnel lining and the air plug surface. It is revealed that for embedded depth up to 20 m, the air plug can provide sufficient friction to resist the flow of water and soil without inducing excessive deformation of the tunnel structure. However, the careful choice of the pressure is important to avoid excessive deformation of the tunnel lining.
The International Conference On Advances In Computational Mechanics Acome 2017 August 02–04, Phu Quoc, Vietnam
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Pons J, Oñate E, Flores F, García J, Ribó R, Marcipar J (2005) Numerical and experimental values comparison for an inflatable structure. In: Textile Composites and Inflatable Structures II
Chen L, Nguyen-Thanh N, Nguyen-Xuan H, Rabczuk T, Bordas S, Limbert G (2014) Explicit finite deformation analysis of isogeometric membranes. Comput Methods Appl Mech Eng, 277:104–130
Areias P, Rabczuk T, Reinoso J, Csar de SJ (2017) Finite-strain low order shell using least-squares strains and two-parameter thickness extensibility. Eur J Mech, A/Solids 61:293–314
Areias P, Rabczuk T, Msekh M (2016) Phase-field analysis of finite-strain plates and shells including element subdivision. Comput Methods Appl Mech Eng 312:322–350
Areias P, Soares C, Rabczuk T, Garo J (2016) A finite-strain solidshell using local lwdin frames and least-squares strains. Comput Methods Appl Mech Eng 311:112–133
Nguyen-Thanh N, Zhou K, Zhuang X, Areias P, Nguyen-Xuan H, Bazilevs Y, Rabczuk T (2016) Isogeometric analysis of large-deformation thin shells using rht-splines for multiple-patch coupling. In: Computer methods in applied mechanics and engineering. (Article in Press)
Areias P, Rabczuk T, deS J, NatalJorge R (2015) A semi-implicit finite strain shell algorithm using in-plane strains based on least-squares. Comput Mech 55(4):673–696
Nguyen-Thanh N, Valizadeh N, Nguyen M, Nguyen-Xuan H, Zhuang X, Areias P, Zi G, Bazilevs Y, De Lorenzis L, Rabczuk T (2015) An extended isogeometric thin shell analysis based on kirchhoff-love theory. Comput Methods Appl Mech Eng 284:265–291
Amiri F, Milln D, Shen Y, Rabczuk T, Arroyo M (2014) Phase-field modeling of fracture in linear thin shells. Theor Appl Fract Mech, 69:102–109
Areias P, Rabczuk T (2013) Finite strain fracture of plates and shells with configurational forces and edge rotations. Int J Numer Methods Eng 94(12):1099–1122
Chau-Dinh T, Zi G, Lee P.-S, Rabczuk T, Song J.-H (2012) Phantom-node method for shell models with arbitrary cracks. Comput Struct 92–93:242–246
Nguyen-Thanh N, Kiendl J, Nguyen-Xuan H, Wchner R, Bletzinger K, Bazilevs Y, Rabczuk T(2011) Rotation free isogeometric thin shell analysis using pht-splines. Comput Methods Appl Mech Eng 200(47–48):3410–3424
Rabczuk T, Areias P, Belytschko T (2007) A meshfree thin shell method for non-linear dynamic fracture. Int J Numer Methods Eng 72(5):524–548
Rabczuk T, Areias P (2006) A meshfree thin shell for arbitrary evolving cracks based on an extrinsic basis. CMES-Comput Model Eng Sci 16(2):115–130
Rabczuk T, Gracie R, Song J.-H, Belytschko T (2010) Immersed particle method for fluid-structure interaction. Int J Numer Methods Eng 81(1):48–71
Rabczuk T, Eibl J (2004) Numerical analysis of prestressed concrete beams using a coupled element free galerkin/finite element approach. Int J Solids Struct 41(3–4):1061–1080
Rabczuk T, Belytschko T (2004) Cracking particles: A simplified meshfree method for arbitrary evolving cracks. Int J Numer Methods Eng 61(13):2316–2343
Rabczuk T, Akkermann J, Eibl J (2005) A numerical model for reinforced concrete structures. Int J Solids Struct 42(5–6):1327–1354
Rabczuk T, Belytschko T (2006) Application of particle methods to static fracture of reinforced concrete structures. Int J Fract 137(1–4):19–49
Rabczuk T, Belytschko T (2007) A three-dimensional large deformation meshfree method for arbitrary evolving cracks. Comput Methods Appl Mech Eng 196(29–30):2777–2799
Rabczuk T, Zi G, Bordas S, Nguyen-Xuan H (2008) A geometrically non-linear three-dimensional cohesive crack method for reinforced concrete structures. Eng Fract Mech 75(16):4740–4758
Rabczuk T, Zi G, Bordas S, Nguyen-Xuan H (2010) A simple and robust three-dimensional cracking-particle method without enrichment. Comput Methods Appl Mech Eng 199(37–40):2437–2455
H. Verakis, “Technology developments and mine safety engineering evaluations,” M UTMANSKY JM, RAMANI R V. Proceedings and Monographs in Engineering: Water and Earth Sciences. London: Taylor and Francis Group, pp. 565–568, 2006
Hinkle JM, Cadogan DP, Roushey JL, Cook RJ (2012) Design and testing of an expandable structure using multi-layer softgoods technology. In: Proceedings of the AIAA/ASME/ASCE structures, dynamics, and materials
Barbero E, Sosa E, Martinez X, Gutierrez J (2013) Reliability design methodology for confined high pressure inflatable structures. Eng Struc 51:1–9
Martinez X, Davalos J, Barbero E, Sosa E, Huebsch W, Means K, Banta L, Thompson G (2012) Inflatable plug for threat mitigation in transportation tunnels. In: Proceedings of the society for the advancement of material and process engineering (SAMPE) 2012 conference, pp 21–24
“35,000 gallons of protection: Containing a tunnel flood with an inflatable stopper,” Technical report, U.S. Department of Homeland Security’s Science and Technology Directorates (2012). https://www.dhs.gov/science-and-technology/35000-gallons-prevention
Sosa E, Thompson G, Barbero E (2014) Testing of full-scale inflatable plug for flood mitigation in tunnels. Transp Res Rec J Transp Res Board 2407:59–67
Sosa EM, Thompson GJ, Barbero EJ, Ghosh S, Peil KL (2014) Friction characteristics of confined inflatable structures. Friction 2:365
Sill JJ (2011) Friction and leakage characteristics of water-filled structures in tunnels. Master’s thesis, West Virginia University
Sosa EM, Wong JC-S, Adumitroaie A, Barbero EJ, Thompson GJ (2016) Finite element simulation of deployment of large-scale confined inflatable structures. Thin-Walled Struct 104:152–167
Zhuang X, Zhang X, Zhu H (2015) 3-d finite element model for destruction process of segment joints of shield tunnel using elastoplastic and damage constitutive methods. Chin J Geotech Eng 37:1826–1834
Vu-Bac N, Lahmer T, Zhuang X, Nguyen-Thoi T, Rabczuk T (2016) A software framework for probabilistic sensitivity analysis for computationally expensive models. Adv Eng Softw 100, pp 19–31
Hamdia K, Msekh M, Silani M, Vu-Bac N, Zhuang X, Nguyen-Thoi T, Rabczuk T (2015) Uncertainty quantification of the fracture properties of polymeric nanocomposites based on phase field modeling. Compos Struct 133:1177–1190
Vu-Bac N, Lahmer T, Keitel H, Zhao J, Zhuang X, Rabczuk T (2014) Stochastic predictions of bulk properties of amorphous polyethylene based on molecular dynamics simulations. Mech Mater 68:70–84
Vu-Bac N, Rafiee R, Zhuang X, Lahmer T, Rabczuk T (2015) Uncertainty quantification for multiscale modeling of polymer nanocomposites with correlated parameters. Compost Part B: Eng 68:446–464
Vu-Bac N, Silani M, Lahmer T, Zhuang X, Rabczuk T (2015) A unified framework for stochastic predictions of mechanical properties of polymeric nanocomposites. Comput Mater Sci 96(PB):520–535
Vu-Bac N, Lahmer T, Zhang Y, Zhuang X, Rabczuk T (2014) Stochastic predictions of interfacial characteristic of polymeric nanocomposites (pncs). Compos Part B Eng 59:80–95
Ghasemi H, Park H, Rabczuk T (2017) A level-set based iga formulation for topology optimization of flexoelectric materials. Comput Methods Appl Mech Eng 313:239–258
Ghasemi H, Brighenti R, Zhuang X, Muthu J, Rabczuk T (2015) Optimal fiber content and distribution in fiber-reinforced solids using a reliability and nurbs based sequential optimization approach. Struct Multidiscip Optim 51(1):99–112
Ghasemi H, Rafiee R, Zhuang X, Muthu J, Rabczuk T (2014) Uncertainties propagation in metamodel-based probabilistic optimization of cnt/polymer composite structure using stochastic multi-scale modeling. Comput Mater Sci 85:295–305
Ghasemi H, Brighenti R, Zhuang X, Muthu J, Rabczuk T (2014) Optimization of fiber distribution in fiber reinforced composite by using nurbs functions. Comput Mater Sci 83:463–473
Nanthakumar S, Lahmer T, Zhuang X, Park H, Rabczuk T (2016) Topology optimization of piezoelectric nanostructures. J Mech Phys Solids 94:316–335
Nanthakumar S, Valizadeh N, Park H, Rabczuk T (2015) Surface effects on shape and topology optimization of nanostructures. Comput Mech 56(1):97–112
Nanthakumar S, Lahmer T, Zhuang X, Zi G, Rabczuk T (2015) Detection of material interfaces using a regularized level set method in piezoelectric structures. Inverse Probl Sci Eng (Article in Press)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2018 Springer Nature Singapore Pte Ltd.
About this paper
Cite this paper
Liao, A., Shang, H., Kou, X., Huang, J., Zhuang, X. (2018). Modeling of 3D Inflatable Large Deformation Air Plug in Contact With Concrete Lining. In: Nguyen-Xuan, H., Phung-Van, P., Rabczuk, T. (eds) Proceedings of the International Conference on Advances in Computational Mechanics 2017. ACOME 2017. Lecture Notes in Mechanical Engineering. Springer, Singapore. https://doi.org/10.1007/978-981-10-7149-2_8
Download citation
DOI: https://doi.org/10.1007/978-981-10-7149-2_8
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-10-7148-5
Online ISBN: 978-981-10-7149-2
eBook Packages: EngineeringEngineering (R0)