Abstract
In order to effectively use the piezoelectric cantilever generator to collect the ambient vibration energy, it is necessary to study the influence of the structural parameters on the operating frequency, output voltage and output power of the piezoelectric cantilever beam. Firstly, the influence of the length, the thickness and the width ratio of the substrate and the piezoelectric ceramic on the output voltage and natural frequency of the piezoelectric cantilever beam are analyzed. Then, the influence of the output voltage and the quality of the mass block on the output power of the trapezoidal piezoelectric cantilever beam under harmonic excitation is analyzed. Finally, the influence of the external load resistance on the output power of the piezoelectric generator and the influence of the mass block on the internal resistance of the piezoelectric cantilever beam are studied. The results show that the triangular piezoelectric ceramic piece has the strongest power generation performance, followed by the trapezoidal piezoelectric ceramic piece, the rectangular piezoelectric ceramic piece is worst under the condition of the same length, thickness and upper width of the substrate and the piezoelectric ceramic piece, and there is an optimal length and thickness of the piezoelectric ceramic piece; The shape of the substrate has a greater influence on the resonant frequency of the piezoelectric energy collector than that of the piezoelectric ceramic;Increasing the quality of the mass block can significantly improve the output power of the piezoelectric energy collector and improve its internal resistance.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Junlong Wang, Binghao Bao, Fenglian Wen, et al. Modeling and analysis of bimorph cantilever generators. Mach Des Manuf. 2010;9:3–5.
Shu Sun, Shuqian Cao, Nan Jiang, et al. Experimental Study on an Impact Piezoelectric Generator. J Vib Shock. 2012;31(17):95–8.
Liu WQ, Feng ZH, He J, et al. Maximum mechanical energy harvesting strategy for a piezoelement. Smart Mater Struct. 2007;16(6):2130–6.
Hongjin Wang, Qingfeng Meng. Analytical modeling and experimental verification of vibration-based piezoelectric bimorph beam with a tip-mass for power harvesting. Mech Syst Signal Process. 2013;36(1):193–209.
Xiaobiao Shan, Jiangbo Yuan, Tao Xie, et al. Modeling and test of piezoelectric cantilever generators with different shapes. J Vib Shock. 2010;29(4):177–80.
Xie Z. Structure design and realization of energy harvesting device based on piezoelectric. Huazhong University of Science and Technology; 2011.
Miao J, Zhu R. The finite element analysis of twin piezoelectric micro cantilever based on ANSYS. Piezoelectric Acoustooptics, 2011, 33(4):557–60.
Sodano HA, Magliula EA, Park G, et al.Electric power generation from piezoelectric materials. In: Proceedings of the 13th international conference on adaptive structures and technologies, Oct 7–9; 2002; Potsdam/Berlin, Germany.
Yan Z. Electromagnetic analysis technology and example of ANSYS engineering. Beijing: China Water and Power Press; 2006. pp. 407–39.
Amirtharajah R, Chandrakasan A P. A micropower programmable DSP using approximate signal processing based on distributed arithmetic. Solid-State Circuits, IEEE J, 2004, 39(2):337–347.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Appendix
Appendix
Appendix and supplement both mean material added at the end of a book. An appendix gives useful additional information, but even without it the rest of the book is complete: In the appendix are twelve detailed figures. A supplement, bound in the book or published separately, is given for comparison, as an enhancement, to provide corrections, to present later information, and the like: A yearly supplement is issue.
Rights and permissions
Copyright information
© 2018 Springer Nature Singapore Pte Ltd.
About this paper
Cite this paper
Li, X., Tian, H., Dong, Y., Duan, Y. (2018). Study on Piezoelectric Energy Collector with Different Section Shape. In: Tan, J., Gao, F., Xiang, C. (eds) Advances in Mechanical Design. ICMD 2017. Mechanisms and Machine Science, vol 55. Springer, Singapore. https://doi.org/10.1007/978-981-10-6553-8_5
Download citation
DOI: https://doi.org/10.1007/978-981-10-6553-8_5
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-10-6552-1
Online ISBN: 978-981-10-6553-8
eBook Packages: EngineeringEngineering (R0)