Abstract
In order to improve the pesticide application efficiency and reduce the agricultural chemicals lost in fruit trees spraying, an automatic target spraying system of canopy scanning identification based on the sprayer is designed in view of excess spraying and ineffective spray at trees gaps during traditional spray operation. The ultrasonic sensors are installed on the boom of the sprayer under profile modeling spray to detect the crop canopy. Based on the sensor signals, solenoid valves by side are used to control the switch of nozzles at the corresponding position. The experiment of target spray system is worked at the six year-old landscape tree. The results show that the target spray system can effectively save the amount of application pesticides compared with continuous spray. The target spray system can save pesticides 47.8% at the travel speed of 1 m/s for the gap rate 46.7% of landscape tree. Thus, the target spray system of the sprayer has good application value to the pest control of sparse fruit trees and other crops.
Keywords
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Liu XM, Yuan J, Zhang XH et al (2012) Development and experiment on 3MQ-600 type air-assisted boom sprayer with air-deflector. Trans CSAE 28(10):8–12
Brown DL, Giles DK, Oliver MN et al (2008) Targeted spray technology to reduce pesticide in runoff from dormant orchards. Crop Protection 27:545–552
Jejčič V, Godeša T, Hočevar M et al (2011) Design and testing of an ultrasound system for targeted spraying in orchards. Strojniški vestnik-J Mech Eng 57(7–8):587–598
Hočevar M, Širok B, Jejčič V et al (2010) Design and testing of an automated system for targeted spraying in orchards. J Plant Dis Prot 117(2):71–79
Cao ZY, Zhang JX, Geng CX et al (2010) Control system of target spraying robot in greenhouse. Trans CSAE 26(Supp2):228–233
Yin DF, Chen SR, Mao HP et al (2011) Weed control system for variable target spraying based on fuzzy control. Trans Chinese Soc Agric Mach 42(4):179–183
Stajnko D, Berk P, Lešnik M et al (2012) Programmable ultrasonic sensing system for targeted spraying in orchards. Sensors 12(11):15500–15519
Jin X, Dong X, Yang XJ et al (2016) Design and Experiment of Target Spraying System of 3WGZ-500 Sprayer. Trans Chinese Soc Agric Mach 47(7):21–27
Deng W, He XK, Zhang LD et al (2008) Target infrared detection in target spray. Spectro Spectral Anal 28(10):2285–2289
Lu J, Mao HP, Chen SR (2009) Embedded weed control system for target precision spraying based on ARM7. J Agric Mechanization Res 12:76–79
Zhang L, Zhao ZX, Yu L et al (2010) Positioning algorithm for ultrasonic scanning of fruit tree canopy and its tests. Trans CSAE 26(9):192–197
Liu XM, Li Y, Li M et al (2016) Design and test of smart-targeting spraying system on boom sprayer. Trans Chinese Soc Agric Mach 47(3):1–10
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2018 Springer Nature Singapore Pte Ltd.
About this paper
Cite this paper
Zhao, X., Li, Y., Liu, X., Niu, Z., Yuan, J. (2018). Ultrasonic Sensing System Design and Accurate Target Identification for Targeted Spraying. In: Wang, K., Wang, Y., Strandhagen, J., Yu, T. (eds) Advanced Manufacturing and Automation VII. IWAMA 2017. Lecture Notes in Electrical Engineering, vol 451. Springer, Singapore. https://doi.org/10.1007/978-981-10-5768-7_27
Download citation
DOI: https://doi.org/10.1007/978-981-10-5768-7_27
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-10-5767-0
Online ISBN: 978-981-10-5768-7
eBook Packages: EngineeringEngineering (R0)