Abstract
In the present scenario, use of wireless communication devices is increasing drastically for communication. Because of huge wireless communication, there are chances for loss of signal strength. Power amplifier helps in increasing the strength of week RF signal of transmitter of wireless communication. There is a demand for high quality, low cost and low power consumption power amplifier for wireless devices. This project proposes a design of an efficient MOS Class-E power amplifier at low power consumption either by reducing the input DC power level or by scaling the MOS device using 180 nm technology for wireless applications such as Bluetooth and Wi-Fi application.
This is a preview of subscription content, log in via an institution.
References
Razavi, B.: RF Microelectronics, 2nd edn. Prentice Hall Inc. (1998)
http://www.cadence.com/. Accessed 10 Oct 2015
Park, et al.: A 1.9-GHz CMOS power amplifier using three-port asymmetric transmission line transformer for a polar transmitter. IEEE Trans. Microwave Theory Technol. 55(2), 230–238 (2007)
Lie, D.Y.C., Lopez, J., Popp, J.D., Rowland, J.F., Wang, G., Qin, G., Ma, Z.: Highly efficient monolithic class-E SiGe power amplifier design at 900 and 2400 MHz. IEEE Trans. Circuits Syst.-I Regul. Pap. 56(7), 1455–1466 (2009)
Lee, O., Hwan, K., Kim, H., Lee, D.H., Han, J., Yang, K.S., Lee, C.-H., Kim, H., Laskar, J.: An analysis and design of fully integrated high-power parallel-circuit class-E CMOS power amplifiers. IEEE Trans. Circuits Sys.-I Regul. Pap. 57(3), 724–734 (2010)
Li, Z., Torfs, G., Bauwelinck, J.T., Yin, X.: A 2.45 GHz + 20 dBm fast switching Class-E power amplifier with 43% PAE and a 18 dB wide power range in 0.18 µm CMOS. IEEE Trans. Circuits Syst.–II 59(4), 224–228 (2012)
Ture, K., Kilinc, E.G., Dehollain, C.: A fully integrated low-power Class E power amplifier for short range communication. In: IEEE Proceedings of Mediterranean Microwave Symposium, pp. 1–5 (2014)
Sokal, N., Sokal, A.: Class E–A new class of high-efficiency, tuned single-ended switching power amplifier. IEEE J. Solid-State Circuits 10(3), 168–176 (1975)
Sowlati, T., Leenaert, D.: A 2.4 GHz 0.18-µm CMOS self-biased cascade power amplifier. IEEE J. Solid-state Circuits 40(2), 1318–1324 (2003)
Razavi, B.: Design of Analog CMOS Integrated Circuits. Tata McGraw-Hill (2002)
Ding, Y., Harjani, R.: A high-efficiency CMOS +22-dBm linear power amplifier. IEEE J. Solid-state Circuits 40(2), 1875–1900 (2005)
Lee, T.H.: The Design of CMOS Radio Frequency Integrated Circuits. Cambridge University Press, New York (2004)
Razavi, B.: RF transmitter architectures and circuits. In: IEEE Custom Integrated Circuits Conference (1999)
http://www.ncjrs.gov/pdf/nij/191160.pdf. Accessed 15 Nov 2015
http://www.cadence.com/rl/resource/datasheets/virtuoso_vse_fam_ds.pdf. Accessed 20 Oct 2015
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2018 Springer Nature Singapore Pte Ltd.
About this paper
Cite this paper
Ananda, M., Kalpana, A.B. (2018). An Efficient MOS Class-E Power Amplifier for Wireless LAN Applications. In: Kalam, A., Das, S., Sharma, K. (eds) Advances in Electronics, Communication and Computing. Lecture Notes in Electrical Engineering, vol 443. Springer, Singapore. https://doi.org/10.1007/978-981-10-4765-7_19
Download citation
DOI: https://doi.org/10.1007/978-981-10-4765-7_19
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-10-4764-0
Online ISBN: 978-981-10-4765-7
eBook Packages: EngineeringEngineering (R0)