Parameter Design Method of Planetary Hybrid Power-Split System

Chapter

Abstract

Based on the front introduction of the related theory and simulation technology in the hybrid power system, this chapter proposes a multi-factor integrated parametric design method for a power-split hybrid electric bus (HEB).

References

  1. 1.
    Toyota. Worldwide sales of Toyota hybrids top 10 million units. 2017. http://www.toyota-global.com/innovation/environmental_technology/hv10million/.
  2. 2.
    Hutchinson T, Burgess S, Herrmann G. Current hybrid-electric powertrain architectures: Applying empirical design data to life cycle assessment and whole-life cost analysis. Appl Energy. 2014;119:314–29.CrossRefGoogle Scholar
  3. 3.
    Duoba M, Ng H, Larsen R. In-situ mapping and analysis of the Toyota Prius HEV engine. SAE Technical Paper. 2000.Google Scholar
  4. 4.
    An F, Rousseau A. Integration of a modal energy and emissions model into a PNGV vehicle simulation model, PSAT. SAE Technical Paper. 2001.Google Scholar
  5. 5.
    Rousseau A, Kwon J, Sharer P, Pagerit S, Duoba M. Integrating data, performing quality assurance, and validating the vehicle model for the 2004 Prius using PSAT. 2006.Google Scholar
  6. 6.
    Chen C. Power flow and efficiency analysis of epicyclic gear transmission with split power. Mech Mach Theory. 2013;59:96–106.CrossRefGoogle Scholar
  7. 7.
    Chen C, Angeles J. Virtual-power flow and mechanical gear-mesh power losses of epicyclic gear trains. J Mech Des. 2007;129:107–13.CrossRefGoogle Scholar
  8. 8.
    Chen C, Liang TT. Theoretic study of efficiency of two-dofs of epicyclic gear transmission via virtual power. J Mech Des. 2011;133:031007.CrossRefGoogle Scholar
  9. 9.
    Gupta A, Ramanarayanan C. Analysis of circulating power within hybrid electric vehicle transmissions. Mech Mach Theory. 2013;64:131–43.CrossRefGoogle Scholar
  10. 10.
    Meisel J. An analytic foundation for the Toyota Prius THS-II powertrain with a comparison to a strong parallel hybrid-electric powertrain. SAE 2006 World Congress & Exhibition. 2006.Google Scholar
  11. 11.
    Meisel J. An analytic foundation for the two-mode hybrid-electric powertrain with a comparison to the single-mode Toyota Prius THS-II powertrain. SAE World Congress & Exhibition. 2009.Google Scholar
  12. 12.
    Meisel J. Kinematic study of the GM front-wheel drive two-mode transmission and the Toyota Hybrid System THS-II transmission. SAE Int J Engine 2011;4:1020–34.Google Scholar
  13. 13.
    Kang J, Choi W, Kim H. Development of a control strategy based on the transmission efficiency with mechanical loss for a dual mode power split-type hybrid electric vehicle. Int J Automot Tech. 2012;13:825–33.CrossRefGoogle Scholar
  14. 14.
    Kim J, Kim N, Hwang S, Hori Y, Kim H. Motor control of input-split hybrid electric vehicles. Int J Automot Tech. 2009;10:733–42.CrossRefGoogle Scholar
  15. 15.
    Abdelsalam AA, Cui S. A fuzzy logic global power management strategy for hybrid electric vehicles based on a permanent magnet electric variable transmission. Energies. 2012;5:1175–98.CrossRefGoogle Scholar
  16. 16.
    Johannesson L, Pettersson S, Egardt B. Predictive energy management of a 4QT series-parallel hybrid electric bus. Control Eng Pract. 2009;17:1440–53.CrossRefGoogle Scholar
  17. 17.
    Kim J, Kang J, Kim Y, Kim T, Min B, Kim H. Design of power split transmission: design of dual mode power split transmission. Int J Automot Tech. 2010;11:565–71.CrossRefGoogle Scholar
  18. 18.
    Wang W, Song R, Guo M, Liu S. Analysis on compound-split configuration of power-split hybrid electric vehicle. Mech Mach Theory. 2014;78:272–88.CrossRefGoogle Scholar
  19. 19.
    Li C.-T, Zhang X, Peng H. Design of power-split hybrid vehicles with a single planetary gear. 2012.Google Scholar
  20. 20.
    Yu Y, Gao Y, Peng H, Wang Q. Parametric design of power-split HEV drive train. In: Vehicle Power and Propulsion Conference; 2009. VPPC’09. IEEE. IEEE; 2009. p. 1058–63.Google Scholar
  21. 21.
    Feng Z, Yingke W, Xuhui W, Li Z. Optimal design of planetary gear in multi-mode hybrid drive system. In: Transportation Electrification Asia-Pacific (ITEC Asia-Pacific); 2014 IEEE Conference and Expo. IEEE; 2014. p. 1–5.Google Scholar
  22. 22.
    Ahn K, Papalambros PY. Design optimization of motor/generator full-load characteristics in two-mode hybrid vehicles. SAE Technical Paper. 2009.Google Scholar
  23. 23.
    Li Y, Kar N. Advanced design approach of power split device of plug-in hybrid electric vehicles using dynamic programming. In: Vehicle Power and Propulsion Conference (VPPC); 2011 IEEE. IEEE; 2011. p. 1–6.Google Scholar
  24. 24.
    Liu J, Peng H. A systematic design approach for two planetary gear split hybrid vehicles. Veh Syst Dyn. 2010;48:1395–412.CrossRefGoogle Scholar
  25. 25.
    Zhang X, Peng H, Sun J. A Near-Optimal Power Management Strategy for Rapid Component Sizing of Multimode Power Split Hybrid Vehicles. IEEE Trans Control Syst Tech. 2015;23:609–17.CrossRefGoogle Scholar
  26. 26.
    Cole DE. Elementary vehicle dynamics. Department of Mechanical Engineering, The University of Michigan; 1972.Google Scholar
  27. 27.
    Liu HY, Zhang ZQ, Zhang MQ. Mechanisms and machine theory[M] (Chinese edition). Beijing: China Machine Press; 2007.Google Scholar
  28. 28.
    Liu J. Modeling, configuration and control optimization of power-split hybrid vehicles[D]. The University of Michigan; 2007.Google Scholar
  29. 29.
    Mansour C, Clodic D. Dynamic modeling of the electro-mechanical configuration of the Toyota Hybrid System series/parallel power train[J]. Int J Automot Technol. 2012;13(1):143–166.Google Scholar

Copyright information

© Beijing Institute of Technology Press, Beijing and Springer Nature Singapore Pte Ltd. 2018

Authors and Affiliations

  1. 1.Jilin UniversityChangchunChina

Personalised recommendations