Abstract
The paper presents an example of an automotive handle bracket. The design parameters of burring include fillet radius R, burring diameter D and burring height H, which are all analyzed in this paper. The objective function is thinning rate of parts. By using quadratic regression, a mathematical model between objective function and design parameters can be established, which can be guidance while selecting design parameters of burring.
References
Wei L, Zuo Z, Lan J (2005) Solutions to the problems in adjusting tube fittings stampings dies. China Metal Form Equip Manufact Technol 40(6):69–71
Guo Y, Luo W, Li Y (2001) Metal flow control method of drawing burring combined forming. Forg Stamp Technol 3:22–25
Zhou Z (2000) A burring process of thin-wall parts. Die Mould Ind 26(1):28–29
Yan G, Wang X, Jin J (2014) A study of flanging-upsetting process of flange. J Netshape Form Eng 6(2):6–11
Fan Z, Qiao X, Yang X (2014) A cost-controlling research of NX program simultaneous engineering stamping. Equip Manuf Technol 42(5):190–196
Wang J, Huanhuan W, Feng L (2010) Research on parameters of hole flanging based on deform and orthogonal experiment. Forg Stamp Technol 53(4):142–145
Li J, Wang B, Zhou T (2015) Optimization of progressive die forming based on numerical simulation and response surface method. J Cent South Univ Sci Technol 46(1):66–72
Liu J, Wang B, Tian J (2005) Numerical simulation of hole flanging of large-size barrel and parameter optimization. J Plast Eng 12(4):28–30
Zhang C, Lu X, Chu L (2004) Calculation of the diameter of the pre manufactured hole for flange. Die Mould Ind 30(1):34–37
Zhu H, Wang Z, Wang Z (2013) Simulation and experimental study for drawing-flanging compound forming of axisymmetric holed slab. J Plast Eng 20(5):50–55
Zhang S, Liu X, Liu C (2016) Obtaining and application of aluminum alloy FLD based on numerical simulation. China Metal Form Equip Manuf Technol 51(1):97–100
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2017 Springer Nature Singapore Pte Ltd.
About this paper
Cite this paper
Fu, W., He, Y., Lu, C. (2017). Optimization of Design Parameters of Circular Burring. In: Proceedings of SAE-China Congress 2016: Selected Papers. SAE-China 2016. Lecture Notes in Electrical Engineering, vol 418. Springer, Singapore. https://doi.org/10.1007/978-981-10-3527-2_48
Download citation
DOI: https://doi.org/10.1007/978-981-10-3527-2_48
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-10-3526-5
Online ISBN: 978-981-10-3527-2
eBook Packages: EngineeringEngineering (R0)