Abstract
According to the loose body structure design of the high temperature gas-cooled reactor (HTGR), narrow gaps between the graphite and carbon blocks are widely distributed in the reactor core and become possible bypass flow paths. Related to the effective cooling flow rate in the primary loop, the bypass flow distribution is important to the thermal hydraulic design and safety analyses of the HTGR. Typical gaps of bypass flow paths are mini-scale rectangular gaps with small height/width ratio of the cross section, and their sizes are about 1.0 mm. Due to non-circular cross section, small height/width ratio and mini-scale sizes, helium flow in those gaps may be laminar, transient, or turbulent so that the resistance performance of each gap is difficult to predict and is crucial to analyze the bypass flow distribution in the reactor core. In this paper, commercial Computational Fluid Dynamic (CFD) software ANSYS Fluent was utilized to simulate helium flow in mini-scale gaps to investigate the reasonable models for predicting the resistance performances. Two-dimensional simulation results were compared with experimental data conducted in South Africa. The RNG k-ε model with enhanced wall treatments was more appropriate to simulate flows with Reynolds number up to 2 × 104 in mini-scale gaps. Based on the CFD models validated by the pressurized helium flow experiments, they can be further used to study more complex bypass flows in the HTGR.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Zhang, Z, et al. Current status and technical description of Chinese 2 × 250 MWth HTR-PM demonstration plant. Nuclear Engineering and Design, 2009. 239(7): p. 1212–1219.
Sun. J, Zheng. Y and Li. F, Researches of Bypass Flows from Cold Plenum to Hot Plenum in HTR-PM by the Flow Network Method, in 20th International Conference on Nuclear Engineering. 2012: Anaheim, California, USA.
Zheng, Y, Shi. L and Dong. Y.J, Thermohydraulic transient studies of the Chinese 200MWe HTR-PM for loss of forced cooling accidents. Annals of Nuclear Energy, 2009. 36(6): p. 742–751.
Van WYK, M, Verification of leakage through the side reflector graphite of the PBMR reactor. 2004, North-West University: Potchefstroom. p. 82.
D B Spalding, B.E.L, Lectures in Mathematical Models of Turbulence. 1972, London, England: Academic Press.
Yakhot, V. and S.A. Orszag, Renormalization Group Analysis of Turbulence I Basic Theory. Journal of Scientific Computing, 1986. 1(1): p. 1–51.
Orszag, S.A. et al. Renormalization Group Modeling and Turbulence Simulations, in International Conference on Near-Wall Turbulent Flows. 1993: Tempe Arizona.
Menter, F.R. Two-Equation Eddy-Viscosity Turbulence Models for Engineering Applications. AIAA Journal, 1994. 8(32): p. 1598–1605.
Wilcox, D.C. Turbulence Modeling for CFD. 1998, DCW Industries, Inc: La Canada California.
Launder, B.E. and D.B. Spalding, The Numerical Computation of Turbulent Flows. Computer Methods in Applied Mechanics and Engineering, 1974: p. 269–289.
Acknowledgments
This work has been supported by the National S&T Major Project (Grant No. ZX069) and the National Natural Science Foundation of China (Grant No. 51406102).
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2017 Springer Science+Business Media Singapore
About this paper
Cite this paper
Peng, H., Sun, J. (2017). Numerical Investigations of the Helium Flow in Mini-Scale Gaps. In: Jiang, H. (eds) Proceedings of The 20th Pacific Basin Nuclear Conference. PBNC 2016. Springer, Singapore. https://doi.org/10.1007/978-981-10-2314-9_16
Download citation
DOI: https://doi.org/10.1007/978-981-10-2314-9_16
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-10-2313-2
Online ISBN: 978-981-10-2314-9
eBook Packages: EnergyEnergy (R0)