Abstract
In sheet metal industries, blanking dies are considered as basic types of stamping dies. Die design is a highly experience-based task. There is no computer-aided system available for automation of design of blanking dies. This chapter describes a knowledge-based system for design of sheet metal blanking dies. The developed system can be used to analyze different die design techniques and complete the design task base on an optimum design configuration. A knowledge base for the selection of a most suitable design from 14 different designs has been constructed. The developed system uses parametric design approach for design and finally engineering drawings in 2-dimensions (2-D) and 3-dimensions (3-D) can be generated automatically. The system is tested through sample runs. The system was built on the AutoCAD platform with Visual Basic, AutoLISP programming languages and MS-Access for the database.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Akira O (1982) Die structure and design-illustrated. NAGOYA International Training Center, JAPAN International Cooperation Agency, JAPAN
Bedewy MK, Abdin M, Nassef G (1993) Bowing and spring-back in progressive piercing blanking of sheet metals. In: Proceedings of the 4th international conference of production and design for development, Ein–Shams University, Cairo, Egypt, 27–29
Choi J, Kim B, Cho H, Kim C (1998) A compact and practical CAD system for blanking or piercing of irregular-shaped sheet metal products and stator and rotor parts. Int J Mach Tools Manuf 38(8):931–963
Cheung K (2001) A knowledge based CAD system for the blanking of sheet metal product. Master Thesis, Department of Manufacturing Engineering and Engineering Management, City University of Hong Kong
Chow WW (1979) Nesting of a single shape on a strip. Int J Prod Res 17:305–322
Gürün H, Nalbant M, Dilipak H, Ozdemir A (2006) Computer aided design of the sequential piercing and cutting dies. J Fac Eng Arch Gazi Univ l 21(2):205–213
Huang K, Ismail H, Hon K (1993) CAPTD: a low-cost integrated computer aided design system for press-tool design. Proc. Instn. Mech. Engrs. Part B J Eng Manuf 207:117–127
Hussein HMA, Shebl MG, Ghobrial MI, Hassan NF (1999) Computer aided design and drafting of sheet metal blanking dies. Jupiter’99, Ain Shams Univ Sci Bull 34(4):611–624
Hussein HMA (2006) Computer aided design and selection of the die-set for sheet metal punching and blanking dies. In: International conference on manufacturing science and technology, (ICOMAST-2006), Melaka, Malaysia, pp 303–306
Hussein H, Abdeltif L, Barakat A, Etman M (2008) An approach to construct an intelligent system in sheet metal cutting die design. In: 9th Cairo university international conference on mechanical design & production (mdp-9) Cairo, Egypt, Jan 8–10
Lin ZC, Hsu CY (1996) An investigation of an expert system for shearing cut progressive die design. Int J Adv Manuf Technol 11:1–11
Lin Z, Hsu C, Yas K (1989) Planning and building an integrated design software of blanking and piercing dies (ESSCP) with a micro expert systems as a main structure. J Chin Soc Mech Eng 10(2):101–120
Nye TJ (1999) Optimal blanking die design for arbitrary blanks. Technical Papers of the NAMRI, Berkeley CA 19–24
Nee AYC (1984) A heuristic algorithm for optimum layout of metal stamping blanks. Annals of the CIRP 33:317–320
Prasad YKDV, Somasundaram S (1991) CASNS: a heuristic algorithm for nesting of irregular shaped sheet metal blanks. Comput Aided Eng J 8(2):69–73
Prasad YKDV, Somasundaram S (1992) CADDS: an automated die design system for sheet metal blanking. Comput Control Eng J 3(4):185–191
Prasad YKDV, Somasundaram S, Rao KP (1995) A sliding algorithm for optimal nesting of arbitrarily shaped sheet metal blanks. Int J Prod Res 33:1505–1520
Pacanowski J (2000) Computer aided designing of the lower shedders used in the blanking die. Metall Foundry Eng 26(1):41–48
Ruan X, Zhang Z, Lu W, Tin L (1987) A blanking die cad system on microcomputers. Adv Technol Plast 1:139–143
Singh R, Sekhon GS (2003) Design and application of hybrid software for modeling die components and die assembly. Proc Inst Mech Eng Part B: J Eng Manuf 217:235–250
Shaikh A, Desai C (2006) Design of blanking die by integration of CAD modeling package and microsoft excel. In: National conference on design of product life (DPLC2006), Paper DPLC-MA&FP-08
Sun BF, Song Y (2014) Research and development of a knowledge-based system for blanking die. Appl Mech Mater 599–601:396–400
Wong K (1992) A CAD/CAM system for sheet metal blanking dies. Master Thesis University of Hong Kong
Zhao Z, Peng Y, Chi X, Haojun M (2001) Research on hybrid expert system application to blanking technology. J Mater Process Technol 116:95–100
Zamzam M, Ahmed A, Chaaban M (1988) Design of blanking and piercing dies using computers. Ain Shams Bulliton, Mech Eng 64–75
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2017 Springer Science+Business Media Singapore
About this chapter
Cite this chapter
Hussein, H.M.A., Barakat, A.F., Fengyin, W., Kumar, S. (2017). Knowledge-Based System for Design of Blanking Dies. In: Kumar, S., Hussein, H. (eds) AI Applications in Sheet Metal Forming. Topics in Mining, Metallurgy and Materials Engineering. Springer, Singapore. https://doi.org/10.1007/978-981-10-2251-7_4
Download citation
DOI: https://doi.org/10.1007/978-981-10-2251-7_4
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-10-2250-0
Online ISBN: 978-981-10-2251-7
eBook Packages: EngineeringEngineering (R0)