Abstract
A case report of malignant tumour in mandible is discussed in this paper. The innovative rapid prototyping (RP) assisted customized surgical cutting guide (CSCG) has developed for the accurate resection of the malignant tumour in the mandible. Computer tomography (CT) scan data in DICOM format is utilized for the development of CSCG. Mimics 14.11 used for image processing to develop diseased model. 3Matics 6.0 software is used for the virtual surgical planning (VSP) and computer-aided design (CAD) of customized implant and CSCG. Finally, CSCG developed by using fused deposition modelling (FDM) , a technique of rapid prototyping (RP) in ABS material. The testing of the RP assisted CSCG was performed by mutually fixing it on the patient’s diseased model developed by the same RP. This paper describes the novel methodology for the development of the RP assisted CSCG and its application to accurately resect the malignant tumour in the mandible. This approach shows good results in designing and manufacturing of the CSCG. Using advanced tools like VSP, CAD and RP, manufacturing of CSCG for the accurate resection of tumour and placement of customized implant may possible easily in actual surgery.
This is a preview of subscription content, log in via an institution.
Buying options
Tax calculation will be finalised at checkout
Purchases are for personal use only
Learn about institutional subscriptionsReferences
Arora A, Datarkar A, Borle R, Rai A, Advani D (2013) Custom made implant for maxillofacial defects using rapid prototype models. J Oral Maxillofac Surg 71:e104–e110
Cansiz E, Arslan Y, Turan F, Atalay B (2013) Design and production of a novel computer assisted patient specific sagittal split osteotomy guide and soft tissue retractor. J Med Biol Eng
Dérand P, Rännar L, Hirsch J (2012) Imaging, virtual planning, design, and production of patient-specific implants and clinical validation in craniomaxillofacial surgery. Craniomaxillofacial Trauma Reconstruct 5(3):137–144
Fantini M, Crescenzio F, Ciocca L (2013) Design and manufacturing of customized surgical devices for mandibular rehabilitation. Int J Interact Des Manuf 7:227–237
Hsu S, Gateno J, Bell R, Hirsch D, Markiewicz M, Teichgraeber J, Zhou X, Xia J (2013) Accuracy of a computer-aided surgical simulation protocol for orthognathic surgery: A prospective multicenter study. J Oral Maxillofac Surg 71:128–142
Logan H, Wolfaardt J, Boulanger P, Hodgetts B, Seikaly H (2013) Exploratory benchtop study evaluating the use of surgical design and simulation in fibula free flap mandibular reconstruction. J Otolaryngol—Head Neck Surgery 42(42):1–9
Lu S, Zhang Y, Shi J, Chen Y, Xu X (2012) Accuracy and efficacy of thoracic pedicle screws in scoliosis with patient-specific drill template. Med Biol Eng Comput 50:751–758
Oliveira M, Hussain N, Dias A, Lopes M, Azevedo L, Zenha H, Costa H, Santos J (2008) 3-D biomodelling technology for maxillofacial reconstruction. Mater Sci Eng, C 28:1347–1351
Polley J, Figueroa A (2013) Orthognathic positioning system: intraoperative system to transfer virtual surgical plan to operating field during orthognathic surgery. J Oral Maxillofac Surg 71(5):911–920
Schepers R, Raghoebar G, Lahoda L, Meer W, Roodenburg J, Vissink A, Reintsema H, Witjes M (2012) Full 3-D digital planning of implant-supported bridges in secondary mandibular reconstruction with prefabricated fibula free flaps. Head Neck Oncol 4(2):1–6
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2017 Springer Science+Business Media Singapore
About this chapter
Cite this chapter
Dahake, S.W., Kuthe, A.M., Mawale, M.B., Bagde, A.D. (2017). Rapid Manufacturing of Customized Surgical Cutting Guide for the Accurate Resection of Malignant Tumour in the Mandible. In: Wimpenny, D., Pandey, P., Kumar, L. (eds) Advances in 3D Printing & Additive Manufacturing Technologies. Springer, Singapore. https://doi.org/10.1007/978-981-10-0812-2_12
Download citation
DOI: https://doi.org/10.1007/978-981-10-0812-2_12
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-10-0811-5
Online ISBN: 978-981-10-0812-2
eBook Packages: EngineeringEngineering (R0)