Abstract
This paper concerns the design and actual construction of practical chemical sensor arrays that are intended for field applications. That is, the direct technical approach to selecting sensors and sensor array systems, that can both contain the needed information as well as be able to provide this information to the user, in order to solve an existing and specific analytical problem. I have been working on the concept of chemical sensor arrays for about 12 years, and have been using sensor arrays to accomplish the elusive goal of providing a practical field instrument for simultaneous chemical identification and quantification. Much has been learnt about the various aspects of building and operating sensor arrays. Prior work has demonstrated clearly that the information content of the signals from sensor arrays is significantly greater than that from single sensor systems. This paper is not a comprehensive review, but rather a discussion of important factors and relationships in developing practical chemical sensor arrays. References are given to provide examples of the concepts and techniques that are used. The reader is encouraged to use these examples as a starting point for further work rather than as the last word on the subject. This manuscript is unavoidably slanted toward my own work because I know this the best.
Keywords
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.
This is a preview of subscription content, log in via an institution.
Buying options
Tax calculation will be finalised at checkout
Purchases are for personal use only
Learn about institutional subscriptionsPreview
Unable to display preview. Download preview PDF.
References
S. Zaromb, W. R. Penrose, W. J. Buttner, P. E. Hess, W. P. McDowell, R. J. Voogd, V. C. Stamoudis, J. R. Stetter, J. O. Stull and C. B. Billing, Development of the CPS-100 portable hazardous chemicals monitor, Final Report to U.S. Coast Guard Office of Research and Development, Avery Point, CT, Pub. by Argonne National Laboratory, Center for Environmental Research, Biological, Environmental and Medical Research Division, Argonne, IL 60439, March 1988; Penrose and Penrose, Designing Computerized Instruments, Tab Books, Summit, PA 17214, U.S.A. (1987).
J. R. Stetter, Electrochemical gas sensors for identification of solid and liquid compounds, Transducer’ 87, Proc. of the 4th International Conference on Solid-State Sensors and Actuators, Institute of EE of Japan, Tokyo, Japan, June 1987, pp. 557-560.
S. Zaromb and J. R. Stetter, Theoretical basis for identification and measurement of air contaminants using an array of sensors having partly overlapping selectivities, Sensors and Actuators, 6 (1985) 225–243.
J. R. Stetter, Instrumentation to monitor chemical exposure in the synfuel industry, Annals American Conf of Governmental and Industrial Hygienists, 11 (1984) 225–269.
J. G. Firth, Measurement of flammable gases and vapours, in C. F. Cullis and J. G. Firth (eds.), Detection and Measurement of Hazardous Gases, Heineman, London (1981) pp. 29–68.
J. R. Stetter, M. W. Findlay, C. Yue, and M. Klein, A chemical sensor for the BTU measurement of natural gas, Proc. of the Gas Quality and Energy Measurement Symposium, June 1989, Chicago, IL, Pub. by IGT, Chicago, 60616.
K. F. Blurton and J. R. Stetter, A sensitive electrochemical detector for gas chromatography, J. Chromatography, 155 (1978) 35–45.
Z. Cao, J. R. Stetter and W. J. Buttner, The properties and applications of amperometric gas sensor, Electroanalysis, (in press, Feb. 1992).
J. R. Stetter, S. Zaromb and M. W. Findlay Jr., Monitoring of electrochemically inactive compounds by amperometric gas sensors, Sensors and Actuators 6 (1985) 269–288.
J. R. Stetter, S. Zaromb and W. Penrose, Sensor array for toxic gas detection, U.S. Patent No.4,670,405; 1984; US Patent No. 5,055,266 (1991).
J. R. Stetter and T. Otagawa, A chemical concentration — modulation sensor for the selective detection of airborne chemicals, Sensors and Actuators, 11 (1987) 251–264.
J. R. Stetter, M. W. Findlay, G. J. Maclay, J. Zhang, S. Vaihinger and W. Gopel, Sensor array and catalytic filament for chemical analysis of vapors and mixtures, Sensors and Actuators B, 1 (1990) 43–48.
J. R. Stetter, G. J. Maclay, and S. V. Christesen, Time-dependent sensor signals for selective detection, Sensor and Actuators, 20 (1989) 277–287.
J. Unwin and P. T. Walsh, Monitoring organic vapours using pyrolysis mass spectrometry, Sensors and Actuators, 17 (1989) 575–581.
S. Vaihinger, J. R. Stetter, W. Gopel, Detection of halogenated and other hydrocarbons in air: Response functions of catalyst/electrochemical sensor systems, Proc. of Eurosensors IV, Karlsruhe, Federal Republic of Germany, October 1990.
S. Zaromb, R. Battin, W. R. Penrose, J. R. Stetter, V. C. Stamdouis and J. O. Stull, Extending the capabilities of the portable chemical parameter spectrometer to the identification of up to 100 compounds, Proc. of the 2nd International Meeting on Chemical Sensors, J.L. Aucouturier et al., eds., Bordeaux, France, July 1986, pp. 739-742.
J. R. Stetter, S. Zaromb, W. R. Penrose, M. W. Findlay, T. Otagawa and A. J. Sincali, Portable device for detecting and identifying hazardous vapors, Proc. of the Hazardous Materials Spills Conference, Paper No. 116, Nashville, Tn, April 1984, John Ludwigson, ed., Government Institutes Inc., (pub), Rockville, MD, 20850.
J. R. Stetter, S. Zaromb, W. R. Penrose, T. Otagawa, J. Sinclair and J. Stull, Portable instrument for the detection and identification of air pollutants, Proc. of the 4th National Symposium on Recent Advances in Pollutant Monitoring of Ambient Air and Stationary Sources, U.S., EPA, RTP, NC, May 1984.
S. C. Chang and J. R. Stetter, Electrochemical NO2 gas sensors: Model and mechanism for the electroreduction of NO2, Electroanalysis, 2 (1990) 359–365.
J. R. Stetter, Electrochemical sensors, sensor arrays, and computer algorithms, in D. Schuetzle, R. Hammerle, and J. Butler (eds.), Fundamentals and Applications of Chemical Sensors, ACS Symposium Series, No. 309, 1986, p. 299.
M. W. Findlay, J. R. Stetter and T. Pritchett, Sensor array based monitor for hazardous waste screening, Proc. HazMat 90 Central, Hazardous Materials Management Central Conference and Exhibition, March 1990, O’Hare Expo Center, Rosemount, IL, published by Environmental Hazards Management Institute, PO Box 932, Durham, NH 03824.
D. S. Weinberg, Development of an effective method of detecting and identifying foreign odours in grain samples, Final Report, Volume I, USDA Contract # 53-6395-5-59, SoRI-EAS-86-1208, Dec. 15, 1986.
Detection and Analysis of Foreign odours in Grain, Transducer Research Inc. Final Report to the US Department of Agriculture, Contract #90-33610-5088, 1991.
M. M. Nelson and W. T. Illingworth, A Practical Guide to Neural Nets, Addison-Wesley Publishing Company, Reading, MA, 1990; see also chapters 11 and 14 in this book.
J. R. Stetter, P. C. Jurs and S. L. Rose, Detection of hazardous gases and vapors: Pattern recognition analysis of data from an electrochemical sensor array, Anal. Chem., 58 (1986) 860–866.
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 1992 Springer Science+Business Media Dordrecht
About this chapter
Cite this chapter
Stetter, J.R. (1992). Chemical Sensor Arrays: Practical Insights and Examples. In: Gardner, J.W., Bartlett, P.N. (eds) Sensors and Sensory Systems for an Electronic Nose. NATO ASI Series, vol 212. Springer, Dordrecht. https://doi.org/10.1007/978-94-015-7985-8_17
Download citation
DOI: https://doi.org/10.1007/978-94-015-7985-8_17
Publisher Name: Springer, Dordrecht
Print ISBN: 978-90-481-4150-0
Online ISBN: 978-94-015-7985-8
eBook Packages: Springer Book Archive