Abstract
The favorable scaling of the strength of brittle materials at small scales has the potential to enable a new class of devices: power MEMS. In this paper the effect of scale on the structural design of such devices is discussed with particular reference to the MIT microengine project. The initial goal of this project is to produce a turbine generator by deep reactive ion etching single crystal silicon. The design and fabrication of such a device offers significant challenges and opportunities. The major structural challenges arise from the very high stress levels (~ 1 GPa) required to achieve acceptable turbomachinery performance and the associated need to measure accurately the material properties. The task is further complicated by the need to achieve a good structural design within the constraints imposed by microfabrication processes. The major opportunities arise from the use of silicon at very small lengthscales. In particular, the use of microfabrication techniques offers the potential to control the processing-induced flaw size such that very high strengths can be obtained.
This is a preview of subscription content, log in via an institution to check access.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
A. H. Epstein, S. D. Senturia, O. Al-Midani, G. Anathasuresh, A. Ayon, K. Breuer, K-S. Chen, F. E. Ehrich, E. Esteve, L. Frechette, G. Gauba, R. Ghodssi, C. Groshenry, S. Jacobson, J. L. Kerrebrock, J. H. Lang, C-C. Lin, A. London, J. Lopata, A. Mehra, J. O. Mur Miranda, S. Nagle, D. J. Orr, E. Piekos, M. A. Schmidt, G. Shirley, S. M. Spearing, C. S. Tan, Y-S. Tzeng, I. A. Waitz, (1997), Micro-Heat Engines, Gas Turbines, and Rocket Engines - the MIT Microengine Project. AIAA Paper AIAA-97–1773, Presented at 28th AIAA Fluid Dynamics Conference/4th AIAA Shear Flow Control Conference, Snowmass Village, CO, June 29 -July 2 1997.
A. H. Epstein, S. D. Senturia, G. Anathasuresh, A. Ayon, K. Breuer, K-S. Chen, F. E. Ehrich, G. Gauba, R. Ghodssi, C. Groshenry, S. Jacobson, J. H. Lang, C-C. Lin, A. Mehra, J. M. Miranda, S. Nagle, D. J. Orr, E. Piekos, M. A. Schmidt, G. Shirley, S. M. Spearing, C. S. Tan, Y-S. Tzeng, I. A. Waitz, (1997) Power MEMS and Microengines, Presented at IEEE Transducers ‘87 Conference, Chicago, IL.
Epstein, A. H., “Micro Gas Turbine Generators”, Second Interim Technical Progress Report, ARO 33888CH-MUR, Army Research Office, N.C., 1997
Wolf, R. and Helibig, R., “Reactive Ion Etching of 6H-SiC in SF6/02 and CF4/02 with N2 Additive for Device Fabrication,” J. Electrochem. Soc., Vol. 143, pp. 1037–1042
Neuberger, M., “Physical and Electronic Properties of SiC”, Mat. Res. Bull., Vol 4, pp s365–370, 1969
Timoshenko, S. and Goodier, J.: “Theory of Elasticity,3rd edition”, McGraw-Hill, New York, 1970.
ATTAP: Advanced Turbine Technology Application Project 1994 Annual Report
Griffith, A. A., “The Phenomena of Rupture and Flow in Solids,” Phil. Trans. Roy. Soc. A221, 163–198, 1920
Weibull, W., “A Statistical Theory of the Strength of Materials,” Ing. Vetenskaps Akad. Handl., No. 151, pp. 45, 1939
Hu, S. M.: “Critical stress in silicon brittle fracture, and effect of ion implantation and other surface treatments”, J. of Applied Physics, 53(5), pp. 3576–3580, 1982
Ashby M. F. and Jones, D., Engineering Materials II, An Introduction to Microstructures, Processing and Design,pp. 169–174, Pergamon Press, Oxford, U.K., 1987.
Nakakado, K., Machida, T., Miyata, H., Hisamatsu, T., Mori, N., and Yuri, I.: “Strength Design and Reliability Evaluation of a Hybrid Ceramic Stator Vane for Industrial Gas Turbines”, J. Eng., for Gas Turbine and Power, Vol. 117, pp 245–250, 1995
Lawn, B. R. Facture of Brittle Solids, Second Edition, Cambridge University Press, 1993, pp. 249–300
K-S. Chen, A. Ayon and S. M. Spearing, Controlling and Testing the Fracture Strength of Silicon at the Mesoscale, (1997), Submitted to J. Am. Ceram. Soc.
K-S. Chen, S. M. Spearing and N. N. Nemeth, Structural Design of a Silicon MicroTurboGenerator, in preparation.
S. M. Spearing and K. S. Chen, Micro Gas Turbine Engine Materials and Structures, Ceramic Engineering and Science Proceedings, 18 (4), 11–18, 1997
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 1998 Springer Science+Business Media Dordrecht
About this paper
Cite this paper
Spearing, S.M., Chen, K.S. (1998). Power MEMS Materials and Structures. In: Bhushan, B. (eds) Tribology Issues and Opportunities in MEMS. Springer, Dordrecht. https://doi.org/10.1007/978-94-011-5050-7_7
Download citation
DOI: https://doi.org/10.1007/978-94-011-5050-7_7
Publisher Name: Springer, Dordrecht
Print ISBN: 978-94-010-6121-6
Online ISBN: 978-94-011-5050-7
eBook Packages: Springer Book Archive