Abstract
We present a methodology for the first-order stiffness and vibration analysis of general robotic systems including parallel mechanisms, based on geometric methods for kinematics and elasticity analysis. We exploit the uniformity and structure typically extant in parallel mechanisms to develop an accurate and computationally tractable method of stiffness and vibration analysis that is amenable to design iterations and optimization. By way of our analysis we formalize the notion of a mechanism’s structural compliance matrix, and derive an associated set of dynamic equations that model elastic effects without resorting to assumed modes or finite element models. Our methodology is illustrated with a case study involving the Eclipse, a novel six degree-of-freedom parallel mechanism designed for rapid machining. Numerical results indicate close correspondence with results obtained using ANSYS.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
Bhattarchaya, S., Hatwal, H., and Ghosh, A., (1995), On the optimum design of Stewart platform type parallel manipulators, Robotica, vol. 13, pp. 133–140.
Brockett, R., and Stokes, A., “On the synthesis of compliant mechanisms,” Proc. IEEE Int. Conf. Robotics and Automation, Sacramento, CA, pp. 2168–2173, 1991.
Garcia de Jalon, J., and Bayo, E., Kinematic and dynamic simulation of multibody sys-tems. New York: Springer, 1994.
Howard, S., Zefran, M., and Kumar, V., “On the 6x6 Cartesian stiffness matrix forthree-dimensional motions,” Mechanism & Machine Theory, vol. 33, no. 4, 1998.
Loncaric, J. (1987), “Normal forms of stiffness and compliance matrices,” IEEE Trans. Robotics fi Autom., vol. 3, no. 6, pp. 567–572.
Loncaric, J., “Elastic systems and quasistatic grasp stability,” Proc. IEEE Int. Conf. Robotics and Automation, Sacramento, CA, pp. 2179–2184, 1991.
Park, F.C., and Kim, J.W., “Manipulability of closed kinematic chains,” ASME J. Mechanical Design, vol. 120, no. 4, 1998.
Park, F.C., and Kim, J.W., “Singularity analysis of closed kinematic chains,” ASME J. Mechanical Design, vol. 121, no. 1, 1999.
Ryu, S.J. et al, “ECLIPSE: An Overactuated Parallel Mechanism for Rapid Machining,” Manufacturing Science and Engineering, ASME, U.S.A, vol. 8, pp. 681–689, 1998.
Theodore, R.J., and Ghosal, A., “Comparison of the assumed modes and finite element models for flexible multilink manipulators,” Int. J. Robotics Res., vol. 14, no. 2, pp. 91–111, 1995.
Valenti, M., (1995), “Machine tools get smarter,” ASME Mechanical Engineering, vol. 117, no. 11, pp. 70–75, 1995.
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2000 Springer Science+Business Media Dordrecht
About this chapter
Cite this chapter
Kim, J., Park, F.C. (2000). Elasto-Kinematic Design Tools for Parallel Mechanisms. In: Lenarčič, J., Stanišić, M.M. (eds) Advances in Robot Kinematics. Springer, Dordrecht. https://doi.org/10.1007/978-94-011-4120-8_31
Download citation
DOI: https://doi.org/10.1007/978-94-011-4120-8_31
Publisher Name: Springer, Dordrecht
Print ISBN: 978-94-010-5803-2
Online ISBN: 978-94-011-4120-8
eBook Packages: Springer Book Archive