Abstract
The present paper is aimed at showing how the CSSc may be described by a certain class of elastic-plastic models. The models were identified based on results obtained from a single-phase α-brass and a medium-carbon ferritic-pearlitic steel. The tests were carried out on cylindrical specimens subjected to uniaxial tension-compression (R = -1). The range of loads applied covered a broad spectrum of lifetimes beginning from LCF, through HCF and up to the fatigue limit. The tests were done on an MTS-810 puiser controlled via an IBM PC AT. Identification of the models was carried out using a program package for approximation with the root-mean-square error adopted as a measure of model performance.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
Kocańda S., Fatigue Failure of Metals, Alphen an den Rijn, Sijthoff 1978.
Eisenberg M.A., Yen C. F., Application of Theory of Viscoplasticity to Uniaxial Cyclic Loading. J. of Engineering Materials and Technology, Trans. of the ASME, Vol. 105, April 1983, 106–112.
Kaleta J., Ziętek G.: On a Certain Class of the Stress-Strain Laws for Cyclic Plasticity. (in press).
Kaleta J. et al., Energy Stored in a Specimen under Fatigue Limit Loading Conditions. J. of Testing and Evaluation, Vol.19, No 4, July 1991, 325–333.
Kasprzak W., Kaleta J., Blotny R., Myszka W., Nizankowski M., APTL-Software, Report No. 25–26, Institute of Materials Science and Applied Mechanics, TU Wroclaw, 1989, (in Polish).
Lemaitre J., Chaboche J.L., Mećanique des Matériaux Solides, Dunod, Bordas, Paris, 1985.
Weng M.T., Some Aspect of Fatigue Relative to Cyclic Yield Stress. Int. Journal of Fatigue, 1981, 3, No 4, 187–193.
Masing G., Proc. of the 2nd International Congress of Applied Mechanics, Zurich, 1926, 332–335.
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 1992 Elsevier Science Publishers Ltd
About this chapter
Cite this chapter
Kaleta, J., Ziętek, G. (1992). Description of the CSSc by a Certain Class of Elastic-Plastic Models. In: Rie, KT., et al. Low Cycle Fatigue and Elasto-Plastic Behaviour of Materials—3. Springer, Dordrecht. https://doi.org/10.1007/978-94-011-2860-5_74
Download citation
DOI: https://doi.org/10.1007/978-94-011-2860-5_74
Publisher Name: Springer, Dordrecht
Print ISBN: 978-94-010-5269-6
Online ISBN: 978-94-011-2860-5
eBook Packages: Springer Book Archive