Advertisement

Rheological and Relaxation Properties of Filled Polymers

  • Yuri G. Yanovsky

Abstract

The study of viscoelastic properties of filled polymers is of important scientific and practical significance. We can argue here about the priority of the theoretical or applied approach to the problem, but one thing is certain: the filling of the polymer leads to practical purposes, extending the possibilities of its applications. Some of the questions concerning the creation of new filled polymeric compositions could probably be solved within the framework of applied investigation only. Nevertheless, it is quite obvious that a sufficiently full measure of generalization can be achieved only by using a set of data obtained by physicomechanical, thermodynamic, thermophysical, structural and other methods.

Keywords

Yield Point Storage Modulus Loss Modulus Filler Content Filler Particle 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. 1.
    Lobe, V.M. and White, J.L.Polym. Eng. Sci., 19 (1979) 617.CrossRefGoogle Scholar
  2. 2.
    Yanovsky, Yu.G., Vinogradov, G.V. and Barancheeva, V.V.Mekhanika Kompozit. Mater., no. 6 (1986) 1073.Google Scholar
  3. 3.
    Yanovsky, Yu.G., Vinogradov, G.V. and Barancheeva, V.V. Proceedings of the Second Conference of European Rheologists, 1986, Rheol. Acta, 26 (1988) 218.Google Scholar
  4. 4.
    Donnet, J.B. and Vidal, A.Zh. Vsesoyuzn. Khim. Obshestva im D.I.Mendeleeva, 31(1) (1986) 10.Google Scholar
  5. 5.
    Hinkelmann, B.Rheol. Acta, 20 (1981) 561.CrossRefGoogle Scholar
  6. 6.
    Han, C.D., Van DerWeghe, T., Shete, P. and Haw, J.R.Polym. Eng. Sci., 21 (1981) 196.CrossRefGoogle Scholar
  7. 7.
    Nakatsuka, T., Kawasaki, H., Itadani, K., et al. J. Appl. Polym. Sci., 27 (1982) 259.CrossRefGoogle Scholar
  8. 8.
    Juskey, V.P. and Chaffey, C.E.Can. J. Chem. Sci., 60 (1982) 334.CrossRefGoogle Scholar
  9. 9.
    Utracki, L.A. and Fisa, B.Polym. Composites, 3 (1982) 193.CrossRefGoogle Scholar
  10. 10.
    Hinkelmann, B.Rheol. Acta, 21 (1982) 491.CrossRefGoogle Scholar
  11. 11.
    Shenoy, A.V., Saini, D.R. and Nadkarni, V.M.Polym. Composites, 4 (1983) 53.CrossRefGoogle Scholar
  12. 12.
    Shenoy, A.V. and Saini, D.R.Colloid. Polym. Sci., 261 (1983) 846.CrossRefGoogle Scholar
  13. 13.
    Lem, K.W. and Han, C.D.J. Rheol. Acta, 27 (1983) 263.Google Scholar
  14. 14.
    Luo, H.L., Han, C.D. and Muovic, J. J.Appl. Polym. Sci., 28 (1983) 3387.CrossRefGoogle Scholar
  15. 15.
    Kitano, T., Kataoka, T. and Nagatsuka, Y.Rheol. Acta, 23 (1984) 20.CrossRefGoogle Scholar
  16. 16.
    Kitano, T., Kataoka, T. and Nagatsuka, Y.Rheol. Acta, 23 (1984) 408.CrossRefGoogle Scholar
  17. 17.
    Hinkelmann, B. and Mennig, G.Chem. Eng. Comm., 36 (1985) 211.CrossRefGoogle Scholar
  18. 18.
    Bretas, R.E.S. and Powell, R.L.Rheol. Acta, 24 (1985) 69.CrossRefGoogle Scholar
  19. 19.
    Mitel, A.T. and Kamal, M.R.Polym. Composites, 1 (1986) 283.CrossRefGoogle Scholar
  20. 20.
    Shenoy, A.V. and Saini, D.R.J. Reinf. Plastics Comp., 5 (1986) 62.CrossRefGoogle Scholar
  21. 21.
    Nielsen, L.E.Mechanical Properties of Polymers and Composites, Marcel Dekker, New York, Vol. 2, 1974, Ch. 7, p. 379.Google Scholar
  22. 22.
    Han, C.D.Rheology in Polymer Processing, Academic Press, New York, 1976, Ch. 7, 182.Google Scholar
  23. 23.
    Nielsen, L.E.Polymer Rheology, Marcel Dekker, New York, 1977, Ch. 9, 133.Google Scholar
  24. 24.
    Paul, D.R. and Newmann, S.Polymer Blends, Academic Press, New York, Vol. 1, 1978, Ch. 7, 295.Google Scholar
  25. 25.
    Donne, J.B. and Voet, A.Carbon Black, Marcel Dekker, New York, 1976.Google Scholar
  26. 26.
    Kirk-Othmer. Encyclopedia of Chemical Technology, 3rd ed., Elastomers, Synthetic (Nitrile Rubber). Wiley, New York, 1979, 534.Google Scholar
  27. 27.
    Nakajima, N., Harrell, E.R. and Seil, D.A. Rubber processing. In: Encyclopedia of Material Science and Engineering, Ed. M.B. Bever, Pergamon Press, New York, 1986.Google Scholar
  28. 28.
    Nakajima, N. and Harrell, E.R. In: Viscoelastic Characterization of Long Branching and Gel in Elastomers in Encyclopedia of Fluid Mechanics, Ed. N.P. Cheremisinoff, vol. 9, Gulf Publishing Co., Houston, TX, 1990.Google Scholar
  29. 29.
    Nakajima, N. and Collins, E.A.Rubber Chem. and Technol., 48 (1975) 615.CrossRefGoogle Scholar
  30. 30.
    Dannenberg, E.M.Rubber Chem. and Technol., 48 (1975) 410.CrossRefGoogle Scholar
  31. 31.
    O’Brien, J., Casshell, E., Wardel, G.E. and McBrierty, V.J.Rubber Chem. and Technol., 50 (1977) 747.CrossRefGoogle Scholar
  32. 32.
    Dannenberg, E.M. Carbon black. In: Encyclopedia of Composite Materials and Components, Ed. M. Grayson, Wiley, New York, 1983, 230.Google Scholar
  33. 33.
    White, J.L. and Crowder, J.W.J. Appl. Polym. Sci., 18 (1974) 1013.CrossRefGoogle Scholar
  34. 34.
    Serizawa, H., Ito, M., Kanamoto, T., Tanaka, K. and Nomura, A.Polymer J., 14 (1982) 149.CrossRefGoogle Scholar
  35. 35.
    Serizawa, H., Ito, M., Kanamoto, T., Tanaka, K. and Nomura, A. Polymer J., 15 (1983) 201, 543.CrossRefGoogle Scholar
  36. 35a.
    Nakajima, N. and Scobbo, J.J., Jr.Rubber Chem. and Technol., 61 (1988) 137.CrossRefGoogle Scholar
  37. 36.
    Tokita, N. and Plishkin, I.. Rubber Chem. and Technol., 46 (1973) 1166.CrossRefGoogle Scholar
  38. 37.
    Song, H.J., White, J.L., Min, K., Nakajima, N. and Weissert, F.C.Adv. Polym. Tech., 8 (1988) 431.CrossRefGoogle Scholar
  39. 38.
    Montes, S., White, J.L. and Nakajima, N. J.Non-Newtonian Fluid Mechanics, 28 (1988) 183.CrossRefGoogle Scholar
  40. 39.
    Isono, Y. and Ferry, J.D.Rubber Chem. and Technol.57 (1984) 925.CrossRefGoogle Scholar
  41. 40.
    Arai, K. and Ferry, J.D.Rubber Chem. and Technol.59 (1986) 592.CrossRefGoogle Scholar
  42. 41.
    Shenoy, A.V. Rheology of highly filled polymer melt systems. In: Encyclopedia of Fluid Mechanics, Ed. N.P. Cheremisinoff, Gulf Publishing Co., Houston, TX, Vol. 7, Ch. 23, 1988.Google Scholar
  43. 42.
    Nakajima, N. and Harrel, E.R. Rheological behaviour of rubber carbon black compounds. In Encyclopedia of Fluid Mechanics, Ed. N.P. Cheremisinoff, Gulf Publishing Co., Houston, TX, Vol. 9, Ch. 8, 1990.Google Scholar
  44. 43.
    Yanovsky, Yu.G. and Zaikov, G.E. Rheological properties of filled polymers. In Encyclopedia of Fluid Mechanics, Ed. N.P. Cheremisinoff, Gulf Publishing Co., Houston, TX, Vol. 9, Ch. 7, 1990.Google Scholar
  45. 44.
    Lipatov, Yu.S.Fizicheskaya Khimia Napolnennych Polimerov (Physical Chemistry of Filled Polymers), Khimiya, Moscow, 1977.Google Scholar
  46. 45.
    Privalko, V.P., Besklubenko, Yu.D., Lipatov, Yu.S.et al. Vysokomol. Soed., 19A(8) (1977) 1744.Google Scholar
  47. 46.
    Howard, G.J. and Shanks, R.A.J. Macromol. Sci., 19(2) (1981) 167.CrossRefGoogle Scholar
  48. 47.
    Lipatov, Yu.S., Demchenko, S.S. and Privalko, V.P.DAN SSSR, 273(1) (1983) 128.Google Scholar
  49. 48.
    Privalko, V.P., Lipatov, Yu.S. and Demchenko, S.S.Vysokomol. Soed., 28(6) (1986) 425.Google Scholar
  50. 49.
    Privalko, V.P.Fizikochimiya Mnogokomponentnych Polimernych Sistem (Physico-Chemistry of Polymer Multicomponent Systems), Naukova Dumka, Kiev, 1986.Google Scholar
  51. 50.
    Privalko, V.P., Novikov, V.V. and Yanovsky, Yu.G.Osnovy Teplofiziki i Reofiziki Polimernych Materialov (Principles of Thermophysics and Rheophysics of Polymer Materials), Naukova Dumka, Kiev, 1991.Google Scholar
  52. 51.
    Rebinder, P.A.Selected Works, Vol. 1, Nauka, Moscow, 1978;Google Scholar
  53. 51a.
    Rebinder, P.A.Selected Works, Vol. 2, Nauka, Moscow, 1979 (in Russian).Google Scholar
  54. 52.
    Uriev, N.B.High Concentration Disperse Systems, Khimiya, Moscow, 1980 (in Russian).Google Scholar
  55. 53.
    Kraus, G. (Ed.)Reinforcement of Elastomers, Interscience, New York, 1965.Google Scholar
  56. 54.
    Manson, J.A. and Sperling, L.H.Polymer Blends and Composites, Plenum Press, New York, 1976.Google Scholar
  57. 55.
    Medalia, A.I.J. Colloid and Interface Sci., 24 (1967) 393.CrossRefGoogle Scholar
  58. 56.
    Kraus, G.Rubber Chem. and Technol., 38 (1965) 1076.Google Scholar
  59. 57.
    Kraus, G., Rollman, V.W. and Gruver, I.T.Macromolecules, 3 (1970) 92.CrossRefGoogle Scholar
  60. 58.
    Rivin, D., Aron, J. and Medalia, A.I.Rubber Chem. and Technol., 41 (1968) 330.CrossRefGoogle Scholar
  61. 59.
    Sircar, A.K. and Voet, A.Rubber Chem. and Technol., 43 (1973) 973.CrossRefGoogle Scholar
  62. 60.
    Kraus, G. and Gruver, I.T.J. Polym. Sci., A-2(8) (1970) 57.Google Scholar
  63. 61.
    Kraus, G.J. Appl Polym. Sci., 15 (1971) 1679.CrossRefGoogle Scholar
  64. 62.
    Sambrook, R.W.Rubber Chem. and Technol., 44 (1971) 728.CrossRefGoogle Scholar
  65. 63.
    Bigg, D.M.Polym. Eng. Sci., 22 (1982) 512.CrossRefGoogle Scholar
  66. 64.
    Saini, D.R., Shenoy, A.V. and Nadkarni, V.M.Polym. Composites, 7 (1986) 193.CrossRefGoogle Scholar
  67. 65.
    Sacks, M.D., Khadilkar, C.S., Scheiffele, G.W., Shenoy, A.V., Dow, J.H. and Sheu, R.S.Advances in Ceramics, 21 (1987) 495.Google Scholar
  68. 66.
    Bigg, D.B.Polym. Plast. Technol. Eng., 23(2) (1984) 133.CrossRefGoogle Scholar
  69. 67.
    Saini, D.R., Shenoy, A.V. and Nadkarni, V.M.Polym. Eng. Sci., 25 (1985) 807.CrossRefGoogle Scholar
  70. 68.
    Saini, D.R. and Shenoy, A.V.Polym. Eng. Sci., 26 (1986) 441.CrossRefGoogle Scholar
  71. 69.
    Shenoy, A.V. and Saini, D.R.Polym. Composites, 1 (1986) 96.CrossRefGoogle Scholar
  72. 70.
    Olmstead, B.A.SPE-J., 26 (1986) 96.Google Scholar
  73. 71.
    Bigg, D.M. Proceedings of the IX International Congress on Rheology in Mexico, Adv. in Rheology, 3 (1984) 429.Google Scholar
  74. 72.
    Plueddemann, E.P.Silane Coupling Agents, Plenum Press, New York and London, 1982.Google Scholar
  75. 73.
    Monte, S.J. and Sugerman, G. Kenrich Petrochemicals, Inc., Bayonne, NJ, 1985.Google Scholar
  76. 74.
    Cohen, L.B.SPE, Plastics Engineering, 29 November 1983.Google Scholar
  77. 75.
    Cohen, L.B.SPE ANTEC, paper 636, New Orleans, April 1984.Google Scholar
  78. 76.
    Cohen, L.B. The Adhesion Society, Savannah, GA, 24 February 1985.Google Scholar
  79. 77.
    Cohen, L.B. The chemistry and reactivity of zircoaluminate coupling agents for filled and reinforced plastics, SPI RP/C, Atlanta, GA, 27–31 January 1986.Google Scholar
  80. 78.
    Bigg, D.M.Polym. Eng. Sci., 23 (1983) 206.CrossRefGoogle Scholar
  81. 79.
    Althouse, L.M., Bigg, D.M. and Wong, W.M.Plastics Compounding, March/April 1983.Google Scholar
  82. 80.
    Sharma, Y.N., Patel, R.D. and Dhimmar, I.H.J. Appl. Polym. Sci., 27 7(1982) 97.CrossRefGoogle Scholar
  83. 81.
    Vinogradov, G.V., Yanovsky, Yu.G., et al. Vysokomol. Soed., 20A(11) (1978) 2403.Google Scholar
  84. 82.
    Yanovsky, Yu.G. and Vinogradov, G.V.Vysokomol Soed., 22A(11) (1980) 2567.Google Scholar
  85. 83.
    Yanovsky, Yu.G., Vinogradov, G.V. and Ivanova, L.I.Vysokomol. Soed., 24A(5) (1982) 1057.Google Scholar
  86. 84.
    Yanovsky, Yu.G., Vinogradov, G.V. and Ivanova, L.I.Inzhenerno-Fizicheskii Zh., 46(8) (1984) 974.Google Scholar
  87. 85.
    Yanovsky, Yu.G., Vinogradov, G.V. and Ivanova, L.I.Doklady Acad. Nauk SSSR, 282(5) (1985) 1190.Google Scholar
  88. 86.
    Ulianov, L.P., Yanovsky, Yu.G., et al. Zavodskaya Labor., 39(11) (1973) 1402.Google Scholar
  89. 87.
    Vinogradov, G.V., et al. Int. J. Polym. Mater., 2 (1972) 1.CrossRefGoogle Scholar
  90. 88.
    Ahuja, S.K.In: Proc. II Int. Congr. Rheology, Plenum Press, New York, 1980, SD 2.6.3, p. 261.Google Scholar
  91. 89.
    Yanovsky, Yu.G., Zhdanyk, V.K., Zolotarev, A.V. and Vinogradov, G.V.Rheol. Acta, 27 (1988) 298.CrossRefGoogle Scholar
  92. 90.
    Vinogradov, G.V., Yanovsky, Yu.G., et al. In: Proc. Int. Rubber Conf., Moscow, 1984, C, vol. 1, p. 19.Google Scholar
  93. 91.
    Havriliak, S. and Negami, S.Polymer, 8(4) (1967) 161.CrossRefGoogle Scholar
  94. 92.
    Marin, G. Contribution à l’étude des propriétés viscoélastiques en régime linéaire du polystyrène à l’état fondu. Thèse pour obtenir le grade de docteur des sciences, Académie de Bordeaux, 1977.Google Scholar
  95. 93.
    Wisniewski, C., Marin, G. and Monge, Ph.Eur. Polym. J., 21 (1985) 479.CrossRefGoogle Scholar
  96. 94.
    Iakobson, E.E. and Faitelson, L.A.Mekhanika Kompozit. Mater., 1 (1990) 146.Google Scholar
  97. 95.
    Kraus, G.Fortschr. Hochpolymere Forsch., B8 (1971) 156.Google Scholar
  98. 96.
    Casson, N. In: Rheology of Disperse Systems, Ed. C.C. Mill, Pergamon Press, London, 1959, p. 84.Google Scholar
  99. 97.
    Yanovsky, Yu.G., Vinogradov, G.V. and Barancheeva, V.V.Vysokomol. Soed., 28A(5) (1986) 983.Google Scholar
  100. 98.
    Smith, T.L.Trans. Soc. Rheol., 3 (1959) 113.CrossRefGoogle Scholar
  101. 99.
    Reynolds, O.Phil. Mag., 20(5) (1885) 469.Google Scholar
  102. 100.
    Cogswell, F.N.Plast, and Polym., 41(151) (1973) 39.Google Scholar
  103. 101.
    Kirby, I.Rheol. Acta, 27(2) (1988) 326.CrossRefGoogle Scholar
  104. 102.
    Goldstein, M.N.Mekhanicheskie Svoiistva Gruntov (Mechanical Properties of Soils), Stroiizdat, Moscow. Vol. 1, 1971, p. 368;Google Scholar
  105. 102a.
    Goldstein, M.N.Mekhanicheskie Svoiistva Gruntov (Mechanical Properties of Soils), Stroiizdat, Moscow. vol. 2, 1973, p. 376.Google Scholar
  106. 103.
    Vinogradov, G.V., Malkin, A.Ya., Plotnikova, E.P., et al. Int. J. Polym. Mater., 2 (1972) 184.CrossRefGoogle Scholar
  107. 104.
    White, J.L., Czarnecki, L. and Tanaka, H.Rubber Chem. and Technol., 53 (1980) 823.CrossRefGoogle Scholar
  108. 105.
    Suetsugu, Y. and White, J.L.J. Appl. Polym. Sci., 28(4) (1983) 1481.CrossRefGoogle Scholar
  109. 106.
    Glushlov, I.A., Vinogradov, G.V. and Rozhkov, V.A.Mekhanika Polimerov, 5 (1974) 902.Google Scholar
  110. 107.
    Suetsugu, Y. and White, J.L.J. Non-Newtonian Fluid Mechanics, 14 (1984) 121.CrossRefGoogle Scholar
  111. 108.
    Hinch, E.J. and Leal, L.G.J. Fluid Mech., 52 (1972) 683.CrossRefGoogle Scholar
  112. 109.
    Simha, R.A.J. Appl. Phys., 23 (1952) 1020.CrossRefGoogle Scholar
  113. 110.
    Onogi, S. and Matsumoto, T.Polym. Eng. Rev., 1(1) (1981) 45.Google Scholar
  114. 111.
    Han, C.D.Multiphase Flow in Polymer Processing, Academic Press, New York, 1981.Google Scholar
  115. 112.
    Einstein, A.Ann. Phys., 19 (1906) 289;CrossRefGoogle Scholar
  116. 112a.
    Einstein, A.Ann. Phys.34 (1911) 591.CrossRefGoogle Scholar
  117. 113.
    Lin, C.J., Perry, J.H. and Schowalter, W.R.J. Fluid Mech., 44 (1970) 1.CrossRefGoogle Scholar
  118. 114.
    Jeffery, G.B.Proc. Roy. Soc, Ser. A., 102 (1922) 161.CrossRefGoogle Scholar
  119. 115.
    Goldsmith, H.L. and Mason, S.G. In: Rheology Theory and Applications, Ed. F.R. Eirich, Vol. 4, Academic Press, New York, 1967, p. 85.Google Scholar
  120. 116.
    Brenner, H.Progress in Heat and Mass Transfer, Vol. 5, Pergamon Press, New York, 1972.Google Scholar
  121. 117.
    Leal, L.G. and Nihen, E.J.Rheol. Acta, 12 (1973) 127.CrossRefGoogle Scholar
  122. 118.
    Mooney, M.J. Colloid Sci., 6 (1951) 162.CrossRefGoogle Scholar
  123. 119.
    Thomas, D.G.J. Colloid Sci., 20 (1965) 267.CrossRefGoogle Scholar
  124. 120.
    Lee, D.J.Trans. Soc. Rheol., 13 (1969) 273.CrossRefGoogle Scholar
  125. 121.
    deGennes, P.G.Le Journal de Physigue, 40 (1979) 783.CrossRefGoogle Scholar
  126. 122.
    Faitelson, L.A. and Kovtin, V.P.Mekhanika Polimerov, (N2) (1975) 326.Google Scholar
  127. 123.
    Kovtin, V.P. and Faitelson, L.A.Mekhanika Kompozit. Mater., (N4) (1990) 715.Google Scholar
  128. 124.
    Doi, M. and Edwards, S.F.J. Chem. Soc, Faraday Trans., part 2, (5) (1978) 918.Google Scholar
  129. 125.
    Doi, M. and Kuzuu, N.I.J. Polym. Sci., Polym. Phys. Ed., 18(3) (1980) 409.CrossRefGoogle Scholar
  130. 126.
    Faitelson, L.A. and Yakobson, E.E.Mekhanika Kompozit. Mater. (N2) (1981) 277.Google Scholar
  131. 127.
    Faitelson, L.A. and Yakobson, E.E.Mekhanika Polimerov, (Nl) (1978) 172.Google Scholar
  132. 128.
    Vinogradov, G.V. and Malkin, A.Ya.Rheology of Polymers, Mir Publishers, Moscow, 1980.Google Scholar
  133. 129.
    Vinogradov, G.V., Malkin, A.Ya., Yanovsky, Yu.G., et al. J. Polym. Sci., Polym. Phys. Ed., A-2(10) (1972) 1061.Google Scholar
  134. 130.
    Yanovsky, Yu.G.L’actualité chimique, March-April 1991, 109.Google Scholar
  135. 131.
    Vinogradov, G.V. and Pavlov, V.P.Rheol. Acta, 1 (1961) 416, 455.Google Scholar
  136. 132.
    Vinogradov, G.V., Borisenkova, E.K. and Zabugina, M.P.DAN SSSR, 277(3) (1984) 614.Google Scholar
  137. 133.
    Faitelson, L.A.Int. J. Polym. Mater., 8(2–3) (1980) 207.CrossRefGoogle Scholar
  138. 134.
    Borisenkova, E.K., Sabsaii, O.Yu., Kurbanaliev, M.K., et al., Polymer, 19 (1978) 1473.CrossRefGoogle Scholar
  139. 135.
    Lipatov, Yu.S.Kolloidnaya Khimiya Polimerov (Colloid Chemistry of Polymers), Naukova Dumka, Kiev, 1984.Google Scholar
  140. 136.
    Vinogradov, G.V., Plotnikova, E.P., Zabugina, M.P., et al. Vysokomol. Soed., 29A(3) (1987) 211.Google Scholar
  141. 137.
    Dreval, V.E. and Vinogradov, G.V.Kolloid. Zk., 51(2) (1985) 237.Google Scholar
  142. 138.
    Meissner, J.J. Chem. Eng. Comm., 33(1) (1985) 159.CrossRefGoogle Scholar
  143. 139.
    Borisenkova, E.K., Dreval, V.E., Vinogradov, G.V., et al. Polymer, 23(1) (1982) 91.CrossRefGoogle Scholar
  144. 140.
    Vinogradov, G.V., Dreval, V.E., Borisenkova, E.K., et al. Vysokomol. Soed., 23A(12) (1981) 2627.Google Scholar
  145. 141.
    Bartenev, G.M. and Ermilova, N.V.Kolloid. Zh., 29(6) (1967) 771.Google Scholar
  146. 142.
    Gul’, V.E.Struktura i Protochnost’ Polimerov (Structure and Strength of Polymers), Khimiya, Moscow, 1978.Google Scholar
  147. 143.
    Bartenev, G.M.Protchnist i Mekhanizm Razruscheniya Polimerov (Strength and Fracture of Polymers), Khimiya, Moscow, 1984.Google Scholar
  148. 144.
    Vinogradov, G.V., Malkin, A.Ya., Volosevitch, V.V., et al. J. Polym. Sci., Polym. Phys. Ed., 13(9) (1975) 1721.CrossRefGoogle Scholar
  149. 145.
    Vinogradov, G.V., Dreval, V.E. and Yanovsky, Yu.G.Rheol. Acta, 24 (1985) 574.CrossRefGoogle Scholar
  150. 146.
    Smith, T.Polym. Sci., A-l (1963) 3597.Google Scholar
  151. 147.
    Optov, V.A., Borisenkova, E.K. and Sabsaii, O.Yu.Kolloid. Zh., 50 (1988) 1033.Google Scholar
  152. 148.
    Payne, A.R.Rubber Plastic Age, 42 (1961) 963.Google Scholar
  153. 149.
    Payne, A.R.J. Appl. Polym. Sci., 3 (1960) 127.CrossRefGoogle Scholar
  154. 150.
    Faitelson, L.A.Izvestiya Akad. Nauk Latvii, (N3) (1965) 42.Google Scholar
  155. 151.
    Faitelson, L.A.Mekhanika Polimerov, (Nl) (1969) 182.Google Scholar
  156. 152.
    Faitelson, L.A.Mekhanika Polimerov, (Nl) (1978) 113.Google Scholar
  157. 153.
    Faitelson, L.A.Mekhanika Polimerov, (N7) (1976) 146.Google Scholar
  158. 154.
    Faitelson, L.A. and Alekseenko, A.I.Mekhanika Polimerov, (N3) (1970) 558.Google Scholar
  159. 155.
    Faitelson, L.A., Leonov, A.I. and Tshiprin, M.G.Mekhanika Polimerov, (N3) (1970) 521.Google Scholar
  160. 156.
    Faitelson, L.A., Tshiprin, M.G. and Briedis, D.B.Plasticheskie Massy, (N9) (1970) 38.Google Scholar
  161. 157.
    Tshiprin, M.G. and Faitelson, L.A.Mekhanika Polimerov, (N4) (1969) 561.Google Scholar
  162. 158.
    Yakovlev, Yu.P. and Briedis, I.P.Mekhanika Polimerov, (N3) (1969) 561.Google Scholar
  163. 159.
    Payne, A.R.J. Appl. Polym. Sci., 6 (1960) 368.CrossRefGoogle Scholar
  164. 160.
    Yanovsky, Yu.G., Vinogradov, G.V. and Dreval, V.E.Trans. CSME, 8(2) (1984) 84.Google Scholar
  165. 161.
    Mosiichin, E.P. and Vinogradov, G.V.Kolloid. Zh., 19 (1957) 311.Google Scholar
  166. 162.
    Han, C.D.Multiphase Flow in Polymer Processing, Academic Press, New York and London, 1981.Google Scholar
  167. 163.
    Suetsugu, Y. and White, J.J. Appl. Polym. Sci., 28 (1983) 1481.CrossRefGoogle Scholar
  168. 164.
    Teteris, G.G. and Briedis, I.P.Mekhanika Kompozit. Mater., (N3) (1989) 514.Google Scholar
  169. 165.
    Teteris, G.G.Mekhanika Kompozit. Mater., (N4) (1990) 715.Google Scholar
  170. 166.
    Briedis, I.P. and Teteris, G.G.Proc. Vth Nat. Conf. on Mechanics and Technol. Composites, Varna-Sofia, Acad. Sci. of Bulgaria Publishers, 1988, p. 54.Google Scholar
  171. 167.
    Gevorgyan, A.M., et al. Technology of Chemical Polymers, Proc. Vinogradov, G.V.NITI, Moscow, 1980, 3233–80.Google Scholar
  172. 168.
    Yanovsky, Yu.G., Vinogradov, G.V., Gevorgyan, A.M., et al. Vysokomol. Soed., 28(11) (1985) 2385.Google Scholar
  173. 169.
    Fridman, M.M., Popov, V.L., et al. Doklady Akad. Nauk SSSR, 255(5) (1980) 1185.Google Scholar
  174. 170.
    Cox, W.P. and Merz, E.H.J. Polym. Sci., 8 (1958) 619.CrossRefGoogle Scholar
  175. 171.
    Vinogradov, G.V., Yanovsky, Yu.G. and Isaev, A.I.J. Polym. Sci., 8 (1970) 1239.Google Scholar
  176. 172.
    Yanovsky, Yu.G. In: Theoretical and Instrumental Rheology, Ed. P. Rebinder). Proc. Inst. Heat Mass Transfer, Minsk, 1970, p. 119.Google Scholar
  177. 173.
    Vinogradov, G.V., Yanovsky, Yu.G. and Frenkin, E.I.R Rheol. Acta, 7(3) (1968) 277.CrossRefGoogle Scholar
  178. 174.
    Bartenev, G.M.Struktura i Relaksatsionnye Svoiistva Elastomerov (Structure and Relaxation Properties of Elastomers), Khimiya, Moscow, 1979.Google Scholar
  179. 175.
    Aivazov, A.B. and Zelenev, Yu.V.Zavodskaya Labor., 34(6) (1968) 750.Google Scholar
  180. 176.
    Ligidov, M.H., Cobzar, Yu.N., Yanovsky, Yu.G., et al. Kompozit. Polimernye Mater., 4 (1989) 215.Google Scholar
  181. 177.
    Tobolsky, A.V.Properties and Structure of Polymers, Wiley, New York, 1960.Google Scholar
  182. 178.
    Ferry, J.D.Viscoelastic Properties of Polymers, 3rd ed., Wiley, New York, 1980.Google Scholar
  183. 179.
    Gul’, V.E., Yanovsky, Yu.G., et al. Doklady Akad. Nauk SSSR, 294(4) (1987) 905.Google Scholar

Copyright information

© Springer Science+Business Media Dordrecht 1993

Authors and Affiliations

  • Yuri G. Yanovsky
    • 1
  1. 1.Institute of Applied MechanicsRussian Academy of SciencesMoscowRussia

Personalised recommendations