Abstract
Different models that can be used to compute the optimum layout and shape of plate structures using homogenization techniques are presented. These models differ in the plate equation used as the basis for the analysis, the microstructure assumed for the material, and the order in which the homogenization and the assembly of plies is performed. Different ply stacking arrangements to assemble the plate are used to build plates with external ribs, internal ribs (honeycomb plates) and transversely perforated plates. The shape optimization problem is stated and the optimality conditions are derived. It is found that the optimality condition for the orientation of the ribs requires the solution of a fourth order polynomial equation, giving directions that are not necessarily aligned with the in-plane principal stress directions. Some shape optimization examples are solved and compared with results from the literature.
Keywords
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
Bendsøe, M.P. (1982) “Some Smear-Out Models for Integrally Stiffened Plates with Applications to Optimal Design”. In Proc. Int. Symp. Optimum Structural Design, Univ. Ariz., Tucson, Arizona. Pineridge Press Ltd., Swansea, pp 13–29 to 13–34.
Bendsøe, M.P. and Kikuchi, N. (1988) “Generating Optimal Topologies in Structural Design using a Homogenization Method”, Comp. Meth. in Applied Mech and Engin, 71, 197–224.
Díaz, A. and Bendsøe, M. (1992) “Shape Optimization of Structures for Multiple Loading Conditions Using a Homogenization Method” Structural Optimization, 4, 17–22.
Duvaut, G. (1976) “Analyse Fontionelleet Mecanique des Milieux Continue. Application à L’étude des Matériaux Composites Elastiques à Structure Périodique -Homogénéisation”, In Theoretical and Applied Mechanics, Ed. W.T. Koiter, p. 119. North-Holland, Amsterdam.
Jones, R. (1975) Mechanics of Composite Materials, McGraw Hill. New York.
Lewinski, T. (1991) “Effective Models of Composite Periodic Plates -III. Two-Dimensional Approaches”, Int. J. Solids Structures, 27, 1185–1203.
Lipton, R. (1992) Personal Communication.
Pedersen, P. (1989) “On Optimal Orientation of Orthotropic Materials”, Structural Optimization, 1, 101–106.
Soto, C. and A. Díaz. (1992) “On the Modeling of Ribbed Plates for Shape Optimization”, Technical Report CDL-92–2, Computational Design Laboratory, Michigan State University, East Lansing, Michigan, USA.
Suzuki, K. and Kikuchi, N. (1991) “A Homogenization Method for Shape and Topology Optimization” Comp. Meth. in Applied Mech in Engin, 93, 291–318.
Suzuki, K. and Kikuchi, N. (1992) “Generalized Layout Optimization of Shape and Topology in Three-Dimensional Shell Structures”, Comp. Meth. in Applied Mech in Engin, to appear.
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 1993 Springer Science+Business Media Dordrecht
About this chapter
Cite this chapter
Soto, C.A., Díaz, A.R. (1993). Optimum Layout and Shape of Plate Structures Using Homogenization. In: Bendsøe, M.P., Soares, C.A.M. (eds) Topology Design of Structures. NATO ASI Series, vol 227. Springer, Dordrecht. https://doi.org/10.1007/978-94-011-1804-0_29
Download citation
DOI: https://doi.org/10.1007/978-94-011-1804-0_29
Publisher Name: Springer, Dordrecht
Print ISBN: 978-94-010-4795-1
Online ISBN: 978-94-011-1804-0
eBook Packages: Springer Book Archive