Abstract
Thermosetting resins are used as matrix precursors in carbon-carbon composites because they are relatively easy to use to impregnate fibres, and a large technology base exists from their use in ‘conventional’ composites processing. The resin impregnation/carbonization route is extremely flexible. Large structures, often with complex geometries, can be manufactured using all of the methods proven in the composites field, e.g. filament winding, prepreg, hand lay-up or pultrusion. In general, thermosetting resins polymerize at low temperatures (<250 °C) to form a highly three-dimensionally cross-linked non-softening amorphous solid. When pyrolysed, the resins form a glassy, isotropic carbon [1] which does not graphitize at temperatures up to 3000 °C.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
Kobayashi, K., Sugawara, S., Toyoda, S. and Honda, N. (1968) Carbon, 6, 359.
Mackay, H. A. (1970) Carbon, 8, 517.
McAllister, L. E. and Taverna, A. R. (1971) Proc. 10th Biennial Conf. on Carbon,Bethlehem, Pa, Paper no. FC-40.
Lewis, J. C., Redfern, B. and Cowlard, F. C. (1963) Solid State Electronics, 6, 251.
Cowlard, F. C. (1970) Design Eng.,March, 49.
Bokros, J. C., Atkins, R. J., Shim, H.S., Hanbold, A. D. and Agarwal, N.K. (1976) Carbon in prosthetic devices, in Petroleum Derived Carbons (eds M. L. Deviney and T. M. O’Grady) Chem. Soc., Washington DC, p. 237.
Kaae, J. L. (1975) Carbon, 13, 246.
Kaae, J. L. (1971) J. Nucl. Mat., 38, 42.
Yamada, S. (1968) A Review of Glass-like Carbons, Battelle Memorial Institute, Columbus, Ohio.
Kawarmura, K. and Jenkins, G. M. (1972) J. Mat. Sci., 7, 1099.
Kaae, J. L. (1972) J. Biomed. Mat. Res., 6, 279.
Stanitski, C. L. and Mooney, V. (1973) J. Biomed. Mat. Res., 7, 97.
Savage, G. M. (1985) PhD thesis, Univ. London.
Cowlard, F. C. and Lewis, J. C. (1967) J. Mat. Sci., 2, 507.
Madorsky, S. L. J. (1953) Res. Nat. Bur. Stds, 51, 327.
Mackay, H. A. (1969) Sandia Labs Report, no. SC-RR-68–651.
Kotlensky, W. V. (1973) Chem. Phys. Carbon, 9, 173.
Fitzer, E. and Gkogkdis, A. (1986) in Petroleum-derived Carbons ACS Symp Se no. 303 (eds J. C. Bacha, J. W. Newman and J. L. White, Am. Chem. Soc., Washington, DC. p. 347.
Fitzer, E., Heym, M. and Karlisch, K. (1974) Proc. 4th Lond. Int. Conf on Carbon p. 172.
Burger, A., Fitzer, E., Heym, M. and Terwiesch, B. (1975) Carbon, 13, 149.
Jenkins, G. M. and Kawamura, K. (1976) Polymeric Carbons, Carbon Fibre, Glass and Char, Cambridge Univ. Press.
Lum, R., Wilkins, C. W., Robbins, M., Lyons, A. M. and Jones, R. P. (1983) Carbon, 21 (2), 111.
Conley, R. T. (1967) J. Macromol. Sci., Al, 81.
Kumar, A. Kulshershtha, A. K. and Gupta, S. K. (1980) Polymer, 21, 317.
Zinke, A. (1951) J. App. Chem., 1, 257.
Ouchi, K. and Honda, H. (1956) J. Chem. Soc. Jap.77, 147.
Ouchi, K. and Honda, H. (1959) Fuel (London), 38, 429.
Ouchi, K. (1966) Carbon, 4, 59.
Fitzer, E., Schafer, W. and Yamada, S. (1969) Carbon, 7, 643.
Billmeyer, F. W. Jr (1970) Text Book of Polymer Science, 2nd edn, WileyInterscience, New York, p. 486.
The Quaker Oats Company Technical Bulletin 131-A.
Delmonts, J. (1969) Furan resins in Modern Plastics Encyclopedia, McGraw-Hill, New York, p. 138.
Downing, P. A. (1978) The Chemical Engineer, April, 272.
Dunlop, A. P. and Reineck, E. A. (1947) Proc. Tech. Conf. Am. Chem. Soc., Chicago Sect., North Western Univ., 24 Jan.
The Quaker Oats Company, Technical Bulletin 205-B.
Madorsky, S. L. J. (1964) Thermal Degradation of Organic Polymers, Interscience, New York.
Fitzer, E. and Schafer, W. (1970) Carbon, 8, 597.
Ozanne, N. (1968) PhD thesis, Univ. Grenoble.
O’Neill, H. J., Boquist, G. W., Putcher, R. E. and Griffith, J. S. (1964) Wadd Tr. 81–72, Vol. XL.
Braun, W. (1970) PhD thesis, Univ. Karlsruhe.
Yamada, S., Saks, H. and Ishi, T. (1965) Carbon, 3, 253.
Delmonte, J. (1981) Technology of Carbon and Graphite Fibre Composites, Van Nostrand Reinhold, New York.
Manocha, L. M. (1982) J. Mat. Sci., 17, 3039.
Fitzer, E., Geigl, K. H. and Huettner, W. (1980) Carbon, 18, 265.
Manocha, L. M., Yasuda, E., Tanabe, Y. and Kimura, S. (1988) Carbon, 26, 333.
Bradshaw, W. G. and Vidoz, A. E. (1978) Am. Ceram. Soc. Bull., 57, 193.
Boyne, L. (1974) Proc. 4th Lond. Int. Carbon and Graphite Conf., p. 215.
Manocha, L. M. (1988) Composites, 19 (4), 311.
Kimura, S., Yasuda, E., Tanaka, H. and Yamada, S. (1975) J. Ceram. Soc. Jap., 83, 122.
Hishiyama, Y., Inagaki, M., Kimura, S. and Yamada, S. (1974) Carbon, 12, 249.
Kamiya, K. and Inagaki, M. (1973) Carbon, 11, 429.
Noda, T. and Kato, H. (1965) Carbon, 3, 289.
Kamya, K., Inagaki, M., Mizutani, M. and Noda, T. (1968) Bull. Chem. Soc. Jap., 41, 2169.
Nakamura, S., Ishii, T. and Yamada, S. (1964) Proc. Symp. on Carbon, Tokyo.
Saxena, R. R. and Bragg, R. H. (1978) Carbon, 16, 373.
Yasuda, E., Kimura, S. and Shibusa, Y. (1980) Trans. Jap. Soc. Comp. Mat., 6, 14.
Agarwol, B. D. and Broutman, L. J. (1980) Analysis and Performance of Fibre Composites, Wiley, New York.
Freeman, W. T. and Stein, B. A. (1985) Aerospace America,44 Oct. p. 44.
Fewell, L. (1976) Chromatog. Sci., 14, 564.
Ballard, D. G. H., Courtis, A., Shirley, I. M. and Taylor, S. C. (1983) J. Chem. Soc. Chem. Commun., 954.
Hergenrother, P. (1985) in Encyclopedia of Polymer Science and Engineering, 1, 2nd edn, Wiley, New York p. 61.
Fitzer, E. (1987) Carbon, 25, 163.
Austin, W. B. and Bilow, N. US patent, 4, 284, 834.
Bilow, N. US patent, 4, 369, 297.
Anderson, C. US patent, 4, 665, 246.
Rights and permissions
Copyright information
© 1993 G. Savage
About this chapter
Cite this chapter
Savage, G. (1993). Thermosetting Resin Matrix Precursors. In: Carbon-Carbon Composites. Springer, Dordrecht. https://doi.org/10.1007/978-94-011-1586-5_4
Download citation
DOI: https://doi.org/10.1007/978-94-011-1586-5_4
Publisher Name: Springer, Dordrecht
Print ISBN: 978-94-010-4690-9
Online ISBN: 978-94-011-1586-5
eBook Packages: Springer Book Archive