Abstract
If we accept that the thermal analysis of both consumer and professional electronic systems is an important part of the struggle for increased quality and reliability, preferably in less time and at a lower cost, the numerical and experimental determination of all relevant parameters is indispensable for the success of a new product.
Keywords
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
Adiutori E., 1989, “The New Heat Transfer”, Ventuno Press, West Chester, Ohio, USA
Anderson A., 1990, “Convective Heat Transfer from Arrays of Modules with Non-Uniform Heat Release”,Thesis Stanford University, Stanford, USA
Arvizu D., Moffat R., 1982, “The Use of Superposition in Calculating Cooling Requirements for Circuit Board Mounted Electronic Components”, 32th Proc. Electr. Comp. Conf., pp.133–144
Beck J., Arnold K., 1977, “Parameter Estimation in Engineering and Science”, John Wiley, USA
BejanA., 1984, “Convection Heat Transfer”, John Wiley, NY, USA
Botterill J., 1990, “No Substitute for Experimentation - Despite the Fallability of Experimenters”, Exp. and Thermal Fluid Science, vol.3, pp.463–466
Danko G., 1983, “The Possibility of Determining and Using a New Local Heat Transfer Coefficient”, Int.JHMT, vol.26, pp.1679–1684
Danko G., 1985, Letters to the Editors - Comments on Adiutori’s Contribution, Int. JHMT, vol.28, pp.515–517
Danko G., 1986, “Formation of the Generalised Convective Boundary Condition with the Physical Heat Transfer Coefficient”, Proc. 8th Int Heat Transfer Conf., San Francisco, pp. 1145–1150
Dean D., 1985, “Thermal Design of Electronic Circuit Boards and Packages”, Electrochem. Publ., pp.151–152
Dekker E., Lasance C., 1987, “Thermal and Electrival Analysis of Solid Aluminium Capacitors”,Act&Pass. Elec Comp., vol.12, pp.167–186
Dickerson P., 1967, “Convenient Thermal Analysis Techniques for PCB Assemblies”, Proc NEPCON, p.43
Idelchik I., 1986, “Handbook of Hydraulic Resistance”, Hemisphere, NY
Jakob M., 1953, “Heat Transfer”, vol.1, John Wiley Publ., USA
Kern D., Kraus A., 1972, “Extended Surface Heat Transfer”, McGraw-Hill, USA
Kline S., McClintock F., 1953, “Estimating the Uncertainty in Single-Sample Experiments”, Mech. Eng.,Jan.
Lasance C., 1993, “Accurate Temperature Prediction in Consumer Electronics: a Must but Still a Myth”, NATO Advanced Study Institute on Cooling of Electronic Systems, June 21-July 2, Izmir, Turkye,to be published.
Lasance C., 1986, “Computer Analysis of Heat Transfer Problems to Check the Validity of Engineering Formulae”, Proc 8th IHTC ’86, San Francisco, pp. 325–330
Lasance C., 1990, “Optimisation of Forced Convection Cooled Electronic Systems: An Experimental Study”, 9th Int. Heat Transf. Conf., Jerusalem, pp.307–312
Lasance, C., 1991, “Numerical Simulation of Natural Convection in a Television Set”, ASME publ. HTD-Vol.171, pp. 101–108
Lasance C., 1992, “Conjugate Heat Transfer of one Component on one PCB in a Small Enclosure”, Work in Progress Session, 8th SEMI-THERM Symp., Austin TX, handout
Lasance C., 1993, “Thermal Management of Air-Cooled Electronic Systems: New Challenges for Research”, in Proc. Eurotherm Seminar no.29 ’Thermal Management of Electronic Systems’, to be published
Moffat R., 1985, “Using Uncertainty Analysis in the Planning of an Experiment”, J. Fluids Eng. vol.107,pp.173–178
Moffat R., 1991, “Experimental Methods for Air Cooling of Electronic Components”, chapter 9 in ’Cooling Techniques for Computers’, Aung W. ed., Hemisphere Publ.
Ortega A., Moffat R., 1986, “Buoyancy Induced Convection in a Non-Uniformly Heated Array of Cubical Elements on a Vertical Channel Wall”, ASME HTD-Vol. 57, Heat Transfer in Electronic Equipment, pp.123–134
Rowe P., 1963, “The Correlation of Engineering Data”, The Chem. Eng., no. 166, march, p CE 69-CE76
Sacadura J.F., 1990, “Measurement Techniques for Thermal Radiation Properties”, 9th Int Heat Transf.Conf., Jerusalem, pp.207–222
SavarF., Poole N., Witting P., 1990, “PCB Glass-Fibre Laminates: Thermal Conductivity Measurements and Their Effect on Simulation”, J. of Electr. Mat, vol.19, pp.1345–1350
Vanlaer D., Lasance C., 1993, “An Experimental Method to Determine the Effective Thermal Conductivity of Printed Circuit Boards”, in Proc. Eurotherm Seminar no. 29 ’Thermal Management of Electronic Systems’, to be published
Wilkie D., 1985, “The Correlation of Engineering Data Reconsidered”, Int J. Heat & Fluid Flow, vol.6,pp.99–103
Wilkie D., 1990, “Some Doubtful Natural Convection Correlations”, Proc. 9th Int. Heat Transfer Conf.,Jerusalem, pp.555–560
Witzman S., Newport D., Nicoletta T., 1990, “An Alternative Methodology for Computing the Temperature Rise of an Electronic Device Inside a Direct Air-Cooled Electronic Cabinet”, 9th Int Heat Transf. Conf.,Jerusalem, pp.313–318
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 1994 Springer Science+Business Media Dordrecht
About this chapter
Cite this chapter
Lasance, C.J.M. (1994). Pragmatic Methods for Determining the Parameters Required for the Thermal Analysis of Electronic Systems. In: Kakaç, S., Yüncü, H., Hijikata, K. (eds) Cooling of Electronic Systems. NATO ASI Series, vol 258. Springer, Dordrecht. https://doi.org/10.1007/978-94-011-1090-7_33
Download citation
DOI: https://doi.org/10.1007/978-94-011-1090-7_33
Publisher Name: Springer, Dordrecht
Print ISBN: 978-94-010-4476-9
Online ISBN: 978-94-011-1090-7
eBook Packages: Springer Book Archive