Abstract
It is commonly believed that new high temperature materials are critically needed to permit the production of several new aerospace and energy-related designs. Nickel-based superalloys have been well developed — such that their melting temperature places a fundamental limit on their utility at elevated temperature. Many avenues are being explored. Ceramics and intermetallics both offer much promise, but significant barriers exist in that damage tolerance must be significantly improved. One commonly suggested approach for increasing the use temperature (or possibly damage tolerance) of materials is to add a large volume fraction of a refractory material (i.e. make a composite). Many, many schemes have been suggested including both continuous and discontinuous as well as three-dimensional reinforcement schemes. Metals, ceramics and intermetallics have all been scrutinized as matrix materials, but the choice of reinforcement is usually ceramic. One obvious goal is to impart more refractory character to the material by adding a phase that is strong at high temperature.
Keywords
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
Padmanabhan, K.A. and Davies, G. J., Superplasticity. Springer-Verlag, Heidelberg, 1980, pp. 201–225.
Edington, J.W., Melton, N.K. and Cutler, C.P., Prog. Mater. Sci., 21 (1976) 61–158.
Johnson, R.H., Metall. Rev., 146 (1970) 115–134.
Hon, S.H., Sherby, O.D., Divetcha, A.P., Karmarkar, S.D. and MacDonald, B.A., J. Comp. Mater., 22 (1988) 102–109.
Clinard, F.W. and Sherby, O.D., Acta Metall., 12 (1964) 911–919.
Gautier, E., Simon, A. and Beck, G., Acta Metall., 35 (1987) 1367–1375.
Wu, M.Y. and Sherby, O.D., Scripta Metall., 18 (1984) 773–776.
Kenobeevsky, S.T., Pravdyk, N.F. and Kutaistev, V.I., Paper no. 681, presented at the Geneva Conference on Atomic Energy, Geneva, Switzerland, 1955.
Kot, R.A. and Weiss, V., Metall. Trans., 1 (1970) 2685–2693.
Chen, Y.C., Daehn, G.S. and Wagoner, R.H., Scripta Metall., 24 (1990) 2157–2162.
Le Flour, J.C. and Locicero, R., Scripta Metall., 21 (1987) 1071–1076.
Lobb, R.C., Cykes, E.C. and Johnson, R.H., Met Sci., 6 (1972) 33–39.
Wu, M.Y., Wadsworth, J. and Sherby, O.D., Metall. Trans. A, 18A (1987) 451–462.
Zegler, S.T., Mayfield, R.M. and Mueller, M.H., Trans. ASM, 50 (1958) 905–925.
Mayfield, R.M., Trans. ASM, 50 (1958) 926–942.
Burke, J.E. and Turkalo, A.M., Trans. ASM, 50 (1958) 943–953.
Lloyd, L.T. and Mayfeld, R.M., Trans. ASM 50 (1958) 954–980.
Boas, W. and Honeycombe, R.W.K., Proc. Royal Soc. London A, 186 (1946) 57–71.
Honeycombe, R.W.K, Deformation in Metals. Edward Arnold, London, 1984, pp. 349–353.
Burke, J.E. and Turkalo, A.M., J. Met., 4 (1952) 651–665.
Pugh, S.F., J. Inst. Met., 86 (1957) 497–503.
Pickard, S.M. and Derby, B., Acta Metall., 38 (1990) 2537–2552.
Daehn, G.S., Hebbar, K., Suh, Y.S. and Zhang, H., Comp. Engng, 3 (1993) 699–713.
Daehn, G.S. and Gonzalez-Doncel, G., Metall. Trans. A, 20 (1989) 2355–2368.
Dunand, D.C. and Derby, B., Fundamentals of Metal Matrix Composites (eds Suresh, S., Martensen, A. and Needleman, A.). Butterworth-Heinemann, Boston, 1993, pp. 191–216.
Clyne, T.W. and Withers, P.J., An Introduction to Metal Matrix Composites. Cambridge University Press, Cambridge, 1993, pp. 141–158.
Daehn, G.S., Zhang, H., Chen, Y.C. and Wagoner, R.H., Modeling the Deformation of Crystalline Solids (eds Lowe, T.C., Rollett, A.P., Follansbee, P.S. and Daehn, G.S.). TMS, Warrendale, PA, 1991, pp. 665–678.
Krajewski, P.E., Allison, J.E. and Jones, J.W., Metall. Trans. A, 24 (1993) 2731–2741.
Bao, G., Hutchinson, J.W. and McMeeking, R.W., Acta Metall., 39 (1992) 1871–1882.
Suresh, S. and Brockenbrough, J.R., Fundamentals of Metal Matrix Composites (eds Suresh, S., Martensen, A. and Neddleman, A.). Butterworth-Heinemann, Boston, 1993, pp. 174–190.
Wakashima, K., Kawakubo, T. and Umekawa, S., Metall. Trans. A, 6 (1975) 1775.
Yoda, S., Takashi, R., Wakshima, K. and Umekawa, S., Metall. Trans. A, 10 (1979) 1796.
Rosler, J., Bao, G. and Evans, A.E., Acta Metall., 39 (1991) 2733–2738.
Fleck, N.A., Muller, G.M., Ashby, M.F. and Hutchinson, J.W., Acta Metall., 42 (1994) 475–487.
Garmong, G., Metall. Trans., 5 (1974) 2183–2190.
Garmong, G., Metall. Trans., 5 (1974) 2191–2197.
Chen, Y.C. and Daehn, G.S., Scripta Metall., 25 (1991) 1543.
Chen, Y.C. and Daehn, G.S., Metall. Trans. A, 22 (1991) 1113–1115.
Miles, M., Daehn, G.S. and Wagoner, R.H., The Ohio State University, Columbus, OH, 1995.
Zhang, H., Daehn, G.S. and Wagoner, R.H., Scripta Metall., 24 (1990) 2151–2155.
Zhang, H., Daehn, G.S. and Wagoner, R.H., Scripta Metall., 25 (1991) 2285–2290.
Zhang, H., PhD thesis, The Ohio State University, Columbus, OH, 1991.
Daehn, G.S., Anderson, P.M. and Zhang, H., Scripta Metall., 25 (1991) 2279–2284.
Zhang, H., Anderson, P.M. and Daehn, G.S., Metall. Trans. A, 25 (1994) 415–425.
Elfishawy, K.F. and Daehn, G.S., Metall. Trans., 26A (1995).
Min, B.K. and Crossman, F.W., Composite Materials: Testing and Design, (ASTM STP 787) (ed. Daniel, I.M.). ASTM, Philadelphia, PA, 1987, pp. 371–392.
Tomkins, S.S. and Dries, G.A., Testing Technology of Metal Matrix Composites (ASTM STP 964). ASTM, Philadelphia, PA, 1988, pp. 248–258.
Eshelby, J.D., chapter in Progress in Solid Mechanics (eds Sneddon, I.N. and Hill, R.). North-Holland Publishers, Amsterdam, 1961, pp. 89–140.
Yarish, S. and Daehn, G.S., The Ohio State University, Columbus, OH, 1995.
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 1996 Springer Science+Business Media Dordrecht
About this chapter
Cite this chapter
Daehn, G.S. (1996). Modeling of enhanced composite creep and plastic flow in temperature cycling. In: Bull, J.W. (eds) Numerical Analysis and Modelling of Composite Materials. Springer, Dordrecht. https://doi.org/10.1007/978-94-011-0603-0_11
Download citation
DOI: https://doi.org/10.1007/978-94-011-0603-0_11
Publisher Name: Springer, Dordrecht
Print ISBN: 978-94-010-4266-6
Online ISBN: 978-94-011-0603-0
eBook Packages: Springer Book Archive