Abstract
In this chapter it is intended to examine the mechanical properties of some of the more widely used fibres in short fibre reinforced thermoplastics and to present in brief form the well-known theories associated with both short fibre and flake/ribbon reinforcements. It is hoped that this chapter together with the comprehensive list of references will give a thorough introduction to the subject of short fibre reinforced thermoplastics.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
Similar content being viewed by others
References
Rauch, H. W., Sutton, W. H., McCreight, L. R, Ceramic Fibers and Fibrous Composite Materials, Academic Press, New York, 1968, Ch. III.
Weeton, J. W, Machine Design, 1969 41 (4), 142.
Taylor, G. F., Phys.Rev., 1924, 23, 655.
Evans, C. C. and Parrat, N. J., New Scientist, 10 July 1969, 68.
Mehan, R. L., Ceramic Fibers and Fibrous Composite Materials, Academic Press, New York, 1968, p. 27.
Zweben C., Composite Materials: Testing and Design, ASTM STP 460, 1969, pp. 528–39.
Coleman, B. D., J. Mech. Phys. Solids, 1958, 7, 60.
Riley, V. R and Reddaway, J. L, J. Mater. Sci., 1968, 3, 41–6.
Riley, V. R, J. Composite Mater., 1968, 2 (4), 436.
Axelson, J. W., in Handbook of Fillers and Reinforcements for Plastics, H. S. Katzand J. V. Milewski (Eds), Van Nostrand, New York, 1978,Ch. 23,p. 415.
Axelson, J. W., ‘Asbestos in plastics’ in Polymer Plastics Technology and Engineering, Vol. 4, L. Naturman (Ed.), Marcel Decker and Newall, New York, 1975, p. 93.
A Property Profile of Arpylene Reinforced Thermoplastic Moulding Compounds, TBA (Turner and Newall) Technical Publication, 1981.
Loken, H. Y., ‘Asbestos free brakes and dry clutches reinforced with Kevlar aramid fibre’, Earthmoving Industry Conference, Peoria, IL, April 1980; SAE Technical Paper 800667.
Li, L. S., Allard, L. F. and Bigelow, W. C.J . Macronal Sci. Phys., 1983, B22 (2), 269–90.
Erickson, R H., Text. Res. J., 1979,49(4). Paper presented at the 1st Nat. Fibres Text. Conf, Atlanta, Ga, Sept. 1978, pp. 226–32.
Dobb, M. G, Johnson, D. J. and Saville, B.P.J. Polym. Sci., Polym. Phys. Ed., 1977, 15(12), 2201–11.
Kulkarni, S. V., Rice, J. S., Rosen, B. W., Composites, 1975, 6 (5), 217–25.
Greenwood, J. H. and Rose, P. J Mater. Sci., 1974, 9 (11), 1809–14.
Hearle, J. W. S. and Wong, B. S., J. Mater. Sci., 1977, 12 (12), 2447–55.
Laffitte, M. H. and Bunsells, A. R.,J. Mater. Sci., 1982, 17 (8), 2391–7.
Bunsell, A R J.Mater. Sci., 1975, 10 (8), 1300–8.
Neal, T. E., ‘Plastics Technology — Recent developments and trends’, Tech. Pap. SPE Pac. Tach. Conf.,4th Ann. PACTEC’79, 1979, pp. 117–20.
Erickson, R. H., Composites, 1976, 7 (3), 189–94.
Takayanagi, M., Kajiyama, T. and Katayose, T., J. Appl. Polym. Sci., 1982, 27 (10), 3903–17.
Penn, L., Adhesia Society, 5th Annual Meeting Mobile, Ala, USA,February 1982, pp. 22a-d; [CONFER, 9(12) 4].
Rein. Plast., March 1983, 27(3), 89.
Mackay, B. A, Reinforced Plastics/Composites Institute 37th Annual Conference, Washington DC, January 1982, Session 24-D, p. 1–5.
Lagman, P. L., Chem. Eng. News, 1982, 60 (6), 23–4.
Mod. Plast. Int., 1983, 13(9), 7678.
Chang, D. C., ASM STP 772, ASTM, Washington, 1982.
Gunston, W. T., Science J., 1969, 5 (2), 39–49.
Morris, J. B.,Atom, Oct. 1968, No. 144, 269.
Dresher, W. H, J. Metals, 1969, 21 (4). 17.
Langley, M, Chartered Mech. Eng., 1970, 17 (2), 56–60.
Watt, W., Phillips, L. N. and Johnson, W., The Engineer, May 1966, 221 (5757), 815.
Coyle, R. A and Gillin, L. M., Department of Supply ARL/MET 63, Australian Defence Scientific Service, Aeronautical Research Laboratories, Feb. 1969.
Cooper, G. A and Mayer, R. M, J. Mater. Sci., 1971, 6 (1), 60.
Badami, D. V, New Scientist, Feb. 1970, 45 (687), 251.
Butler, B. L., Proc. Conf. Carbon Fibre Technology, Albuquerque, New Mexico, Jan. 1970.
Hawthorne, H. M, Baker, C., Bental, R H. and Linger, K. R, Nature, 1970, 227 (5261), 946.
Kawamura, K. and Jenkins, G. M., J. Mater. Sci., 1970, 5 (3), 262.
Thorne, D. J., Nature, 1970, 225 (5237), 1034.
McGowan, H. C. and Milewski, J. V., 24th Annual Technical Conference, Reinforced Plastics/Composites Division, The Society of the Plastics Industry Inc., Washington, 1969.
Williams, W. S., Steffens, D. A. and Bacon, R J. Appl Phys, 1970, 41 (12), 4893.
Jones, B. F. and Duncan, R. G., J. Mater. Sci., 1971, 6 (4), 289.
Jones, B. F, J. Mater. Sci., 1971, 6 (9), 1225.
de Lamotte, E. and Perry, A J., Fibre Science and Technology, 1970, 3 (2), 157.
Moreton, R., Fibre Science and Technology, 1969, 4 (1), 1–73.
Johnson, D. J. and Tyson, C. N., Brit. J. Appi. Phys. (J. Phys. D) Ser. 2, 1969, 2 (6), 787.
Hugo, J. A., Phillips, V. A. and Roberts, B. W., Nature, 1970, 226 (5241), 144.
Wicks, B. J., J. Mater. Sci., 1971, 6 (2), 173.
Coyle, R. A., Gillin, L. M. and Bicks, B. J., Nature, 1970, 226 (5242), 257.
Harling, D. F., Jeol News, 1971, 9(2).
Perret, R. and Ruland, W. J.,Appl Cryst., 1969, 2 (5), 209.
Tuinstra, F. and Koenig, J. L., J. Composite Materials, 1970, 4, 492.
Piggott, M. R, Load Bearing Fibre Composites, Pergamon Press, Oxford, 1980.
Christensen, R. M., Mechanics of Composite Materials, Wiley-Interscience, New York, 1979.
Cox, H. L, Brit. J. Appi Phys., 1952, 3, 72.
Krenchel, H, Fibre Reinforcement, Abademisk Ferlag, Copenhagen, 1964.
Darlington, M. W., McGinley, P. L. and Smith, G. R, Plastics and Rubbers Materials Appl, 1977, 2, 51.
Kardos, J. L., CRC Critical Reviews in Solid State Sciences, 1973, 3, 419–50.
Hopkin, J. C. and Kardos, J. L., Polym. Eng. Sci., 1976, 16, 344.
Chrou, T. W. and Kelly, A, Ann. Rev. Mater. Sci., 1980, 10, 229.
Chow, T. S., J. Mater. Sci., 1980, 15, 1873.
Christie, M. A and Darlington, M. W., in Advances in Composite Material, A R. Russell et al. (Eds), Pergamon Press, Oxford, 1980.
Darlington, M. W. and Christie, M. A to be published.
Kelly, A, Strong Solids, Oxford University Press, Oxford, 1966.
Folkes, M. J., Short Fibre Reinforcement and Thermoplastics, Research Studies Press, John Wiley and Sons, New York, 1982.
Masoumy, E., Kacir, L. and Kardas, J. L., Dep. Mat. Res. Lab., Washington Univ., Missouri, 1980.
Short, D. and Summerscales, J., Composites, Jan. 1980, 11, 33–8.
Richter, H., Kunststoffe, 1977, 67, 739–43.
Maine, F. W. and Shepherd, P. D., Composites, 1974, 5, 193–200.
Glavinchevski, B. G. and Piggot, M., J. Mater. Sci., 1973, 8, 1373.
Piggot, M. K.J. Mater. Sci., 1973, 9, 1373–82.
Rexer, J. and Anderson, E., Polym. Eng. Sci., 1979, 19, 1–11.
Padawar, G. E. and Beecher, N., Polym. Eng. Sci., 1970, 10, 185–92.
Lusis, J, Woodhams, R. T. and Xanthos, M. Polym. Eng. Sci., 1973, 13, 139–45.
Halpin, J. C. and Thomas, R L., J. Composite Materials, 1968, 2, 488–97.
Hill, R, J. Mech. Phys. Solids, 1964, 12, 199.
Kelly, A and Davies, G. J., Metal Rev. 1965, 10, 1–77.
Shepherd, P. D., Golemba, F. J. and Maine, F. W., Fillers and Reinforcements for Plastics, Advances in Chemistry Series, 1974.
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 1986 Elsevier Applied Science Publishers LTD
About this chapter
Cite this chapter
Rayson, H.W., McGrath, G.C., Collyer, A.A. (1986). Fibres, Whiskers and Flakes for Composite Applications. In: Clegg, D.W., Collyer, A.A. (eds) Mechanical Properties of Reinforced Thermoplastics. Springer, Dordrecht. https://doi.org/10.1007/978-94-009-4193-9_2
Download citation
DOI: https://doi.org/10.1007/978-94-009-4193-9_2
Publisher Name: Springer, Dordrecht
Print ISBN: 978-94-010-8363-8
Online ISBN: 978-94-009-4193-9
eBook Packages: Springer Book Archive