Advertisement

Pre-standardization Studies as a Means of Helping the Development of Engineering Ceramics

  • Philippe Boch
  • Jean-Claude Glandus
  • F. Platon

Abstract

The dialogue between ceramics producers and ceramics users is difficult because of the lack of standards. VAMAS is one of the international programmes devoted to pre-standardization studies. It focuses on four topics: strength and delayed fracture, wear and friction properties, hardness, and thermal shock resistance.

Keywords

Thermal Shock Thermal Fatigue Thermal Shock Resistance National Physical Laboratory Slow Crack Growth 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. 1.
    Proceedings of the First European Symposium on Engineering Ceramics, Oyez Scientific and Technical Services, London, 1985.Google Scholar
  2. 2.
    Proceedings of the First International Symposium on Ceramic Components for Engines, Somiya, S., Kanai, E. and Ando, K. (eds), Tokyo, KTK Scientific Publications and London, Elsevier Applied Science Publishers, 1984; Proceedings of the Second International Symposium on Ceramic Components for Engines, Bunk, W. and Hausner, H. (eds), Verlag Bad Honnef, 1986.Google Scholar
  3. 3.
    Creyke, W. E. C., Sainsbury, I. E. J. and Morrell, R., Design with non-ductile materials, London, Applied Science Publishers, 1982.Google Scholar
  4. 4.
    VAMAS bulletin (1, January 1985; 2, July 1985; 3, January 1986; 4, July 1986; 5, January 1987; 7, July 1987; 8, to be published in January 1988 ). The editor was initially Dr E. D. Hondros, NPL, UK, but is now Dr B. Steiner, NBS, USAGoogle Scholar
  5. 5.
    Mussler, B., Swain, M. and Claussen, N. Dependence of fracture toughness of alumina on grain size and test technique, J. Am. Ceram. Soc., 65 (11) (1982) 567–72.CrossRefGoogle Scholar
  6. 6.
    Swain, M. and Rose, L., Strength limitations of transformation-toughened zirconia alloys, J. Am. Ceram. Soc., 69 (7) (1986) 511–18.CrossRefGoogle Scholar
  7. 7.
    Gonzalez, A. C., Multhopp, H., Cook, R. F., Lawn, B. R. and Freiman, S. W. Fatigue properties of ceramics with natural and controlled flaws: a study on alumina, Special Technical Publication 844, ASTM, pp. 43–56, 1984.Google Scholar
  8. 8.
    Fett, T. and Munz, D. Time to failure in static bending tests on A1203 with natural and artificial surface flaws, Ceramic Forum International 61 (9/10) (1984) 446–453.Google Scholar
  9. 9.
    Freiman, S. W. and Fuller, E. R, Ceramics testing under VAMAS: interlaboratory round robin on environmental crack growth parameters, VAMAS programme, 1987.Google Scholar
  10. 10.
    Morrell, R, VAMAS: test procedure for hardness testing of Ceramics programme, VAMAS programme, 1987.Google Scholar
  11. 11.
    Czichos, H., Becker, S. and Lexow, J. Multilaboratory tribotesting: results from the Versailles Advanced Materials and Standards Programme on wear test methods, Wear, 114 (1987) 109–30.CrossRefGoogle Scholar
  12. 12.
    ASTM Committee G2 Research Reports on Standards Gil and G83, Philadelphia, USA ASTM.Google Scholar
  13. 13.
    Study of the tribology of technical ceramics based on SiC, Si3N4, and Zr02 as a function of temperature and environment, Research action in the EURAM programme, ENSCI Limoges, INS A Villeurbanne, Céramiques et Composites Bazet, and University of Surrey.Google Scholar
  14. 14.
    Wurm, G. J. Ceramic programme cooperation within the European Communities, Second European Symposium on Engineering Ceramics, London, November 23–24, 1987.Google Scholar
  15. 15.
    Kapelski, G., Platon, F. and Boch, P. Wear and friction properties of some engineering ceramics, Science of Ceramics, No. 14, Canterbury, September 7–9, 1987.Google Scholar
  16. 16.
    Kamiya, N. and Kamigaito, O. Prediction of thermal fatigue life of ceramics, J. Mater Sci., 14 (1979) 573–82.CrossRefGoogle Scholar
  17. 17.
    Singh, J. P., Nihara, D. and Hasselman, D. P. H. Analysis of thermal fatigue behaviour of brittle structural materials, J. Mater. Sci., 16 (1981) 2789–97.CrossRefGoogle Scholar
  18. 18.
    Gault, C., Ultrasonic spectroscopy method for damage evaluation in ceramics submitted to thermal fatigue, Proceedings of the Second International Symposium on Ceramic Materials and Components for Engines, Bunk, W. and Hausner, H. (eds) Verlag Bad Honnef, 1986, pp. 869–76.Google Scholar
  19. 19.
    Glandus, J. C., Boch, P. and Jouin, C., Resistance to thermal fatigue and standards, Science of Ceramics, No. 13, Supplément au Journal de Physique, Cl (2) (47) (1986) 643–7.Google Scholar
  20. 20.
    Hasselman, D. P. H. Thermal stress resistance of engineering ceramics, Mater. Sci. Engng 71 (1985) 251–64.CrossRefGoogle Scholar
  21. 21.
    Glandus, J. C. and and Boch, P., Main testing methods for thermal shocks, Interceram, 51 (1984) 33–7.Google Scholar

Copyright information

© Elsevier Science Publishers Ltd 1989

Authors and Affiliations

  • Philippe Boch
    • 1
  • Jean-Claude Glandus
    • 1
  • F. Platon
    • 1
  1. 1.Ecole Nationale Supérieure de Céramique IndustrielleLimogesFrance

Personalised recommendations