Zeus Magnets Construction Status Report

  • A. Bonito Oliva
  • F. Bordin
  • O. Dormicchi
  • G. Gaggero
  • M. Losasso
  • R. Penco
  • N. Valle
  • R. Bruzzese
  • M. Spadoni
  • N. Sacchetti
  • Q. Lin

Abstract

The construction progress status of the superconducting magnets for the ZEUS detector, commissioned by INFN Frascati and to be installed in the HERA e- p+ring (DESY, Hamburg), is reported. The first one is a double layer, two densities, aluminum stabilized coil 1849 mm in inner dia., 2487 mm in length and 32.6 mm thick, with a central field of 1.8 T and high particle transparency. The second one is a compensating magnet, wound by a copper stabilized Nb-Ti cable. Its coil has a central field of 5 T, inner dia. 370 mm, a length of 1200 mm and is inserted into a cold iron yoke. The main problems encountered during the large coil construction and the geometrical accuracy obtained are reported. Four splices among the high purity aluminum stabilized cable length were made. An outer support cylinder, 18 mm thick, was shrink fitted around the coil and then the temporary inner mandrel was removed. The distribution of mechanical stresses was measured in the different configurations. A large aluminum alloy vacuum chamber with high radiation transparency was built. The compensating coil is ready to be installed inside its stainless steel cryostat. The cryostat critical features are the high design pressure (20 bar) and the heavy cold mass.

Keywords

Solenoid Coil Thermal Shield Cooling Pipe ZEUS Detector Mylar Foil 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. 1.
    E. Acerbi, F. Alessandria, G. Bacca-glioni, E. Fabrici, L. Rossi (INFN/ Milano), R. Bruzzese, G. Pasotti, M.V. Ricci, N. Sacchetti, M. Spadoni (EURATOM-ENEA/Roma), O. Dormicchi, P. Fabbricatore, R. Penco (ANSALDO ABB COMPONENTI), Thin and Compensating Solenoids for ZEUS Detector. IEEE Transactions on Magnetics, March 1988, Vol.24, No.2, p. 1354.CrossRefGoogle Scholar
  2. 2.
    The ZEUS Detector Technical Proposal March 1986.Google Scholar
  3. 3.
    A. Bonito-Oliva, G. Masullo, O. Dormicchi, G. Gaggero, R. Penco, Quench behaviour of a thin solenoid. MT-11 1989, Int. Conf. on Magnet Technol.Google Scholar
  4. 4.
    J. Hamelin, Three-dimensional contraction and mechanical properties of glass-cloth-reinforced epoxy materials at cryogenic temperatures. A.C.E., Vol. 26, 1980, p. 295.Google Scholar

Copyright information

© The Institute of Electrical Engineers of Japan 1990

Authors and Affiliations

  • A. Bonito Oliva
    • 1
  • F. Bordin
    • 1
  • O. Dormicchi
    • 1
  • G. Gaggero
    • 1
  • M. Losasso
    • 1
  • R. Penco
    • 1
  • N. Valle
    • 1
  • R. Bruzzese
    • 2
  • M. Spadoni
    • 2
  • N. Sacchetti
    • 2
  • Q. Lin
    • 3
  1. 1.Ansaldo Abb Componenti S.r.lGenovaItaly
  2. 2.ENEAFrascatiItaly
  3. 3.World LabGeneveSwitzerland

Personalised recommendations