Abstract
The development and utility of modern materials for the power generation industry for the 1990’s and beyond is discussed together with their weldability The need for additional base material research is highlighted along with the requirements for filler metal evolution.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
Hanneman, R.E., Danko, J.C., Giannuzzi, A.J. and Riccardella, P.C.,Cause of Cracking-Evaluation of Performance Margin Between Different Diameter Type 304 Stainless Steel Piping Systems“, EPRI NP-944, Dec. (1978)
U.S. Nuclear Regulatory Commission Pipe Crack Task Group, Investigation and Evaluation of Stress-Corrosion Cracking in Piping of Boiling Water Reactor Plants“, NUREG -1061, Mar. (1984).
Alexander, et al., “Alternative Alloys for BWR Piping Applications”, EPRI NP-2176, Oct. (1982).
Kobayashi, et al., “Stress Corrosion Cracking Resistance, Mechanical Properties and Weldability of Nuclear Grade 316 Stainless Steel”, EPRI WS-79–176, May (1980).
Lundin, C.D., Lee, C.H., Menon, R., and Stansbury, E.E., “Sensitization of Austenitic Stainless Steels: Effect of Welding Variables and HAZ Sensitization of AISI 304 and HAZ Behavior of BWR Alternative Alloys 316NG and 347”, Welding Research Council Bulletin No. 319, Nov. (1986).
Shack, W.J., Kassner, T.F., Maiya, P.S., Park, J.Y., and Ruther, W.E., “Environmentally Assisted Cracking in Light Water Reactors” NUREG/CR4667 Vol IV-ANL-87–41 Dec. (1978)
Lundin, C.D., Lee, C.H. and Qiao, C.Y.P., “Group Sponsored StudyWeldability and Hot Ductility of Nuclear Grade Austenitic Stainless Steels”, Final Report, Welding Research and Engineering Group, The University of Tennessee, Knoxville, TN, Dec. (1988).
Steffano, J.R.,et al. “Summary of Modified 9Cr-1 Mo Steel Development Program, 1975–1985” ORNL 6303, Oct. (1986).
Bruhl, F., “Vrhalten des 9%-Chromstahles X10CrMoVNb91 and seiner Schweisverbindungen im Kurz-and Langzetiversuch” PhD Thesis, University of Graz, Austria, May (1989).
Prager, M., Cox,T.B., Wada, J.,“Enhanced and Modified Materials For Higher Temperatures and Pressures”, Proceedings of the International Conference on Interaction of Steels With Hydrogen in Petroleum Industry Pressure Vessel Service, Materials Properties Council, N.Y., N.Y., Mar. (1989).
MPC Meeting Minutes, HPV-7, May (1983)
Japan Steel Works Report MRH 83–3–18, Mar. (1983).
Yamaura, T., et al.,“Mechanical Properties of 2–1 /4Cr-1 Mo-V SA-Welds by a Single Pass Per Layer Welding Method” Kawasaki Steel Corporation, October 1989, MPC, HPV-47 Oct. (1989).
EPRI, “Dissimilar-Weld Failure Analysis and Development Program” EPRI Project 1874, Volumes 1–8, (1989).
Hull,F.C. “A High Strength Weldable Stainless Steel For Elevated Temperature Service” ASTM STP 369, Advances in the Technology of Stainless Steels, 1965.
Swindeman, R. W., Goodwin, G.M., Maziasz, P.J., Judkins, R.R., and DeVan, J.H., “Alloy Design Criteria and Evaluation Methods for Advanced Austenitic Alloys in Steam Service” ORNL-6274, May. (1986)
Swindeman, R. W., Goodwin, G.M. and Maziasz, P. J. “Procurement and Screening test Data for Advanced Austenitic Alloys for 650oC Steam Service (Part 1, 14 Cr-16 Ni and 20Cr-30Ni-Fe Alloys)”, ORNL/TM10206/P1, Apr. (1987).
Carolan, R.A., Li, C.Y. Maziasz, R.W., and Todd, J.A., “The Strengthening Mechanisms in Modified AISI 316 Stainless Steels”, ORNUSUB8527488/03, Apr. (1987).
Black, R.D., Carolan, R.D., Li, C.Y., Swindeman, R.W. and Maziasz, P.J. “Effect of Thermal-Mechanical Pretreatments on the Flow Strength of a Copper Modified, Stabilized 316 Stainless Steel”, ORNUSUB/85–27488/03, Jan. (1989)
Maziasz, P.J. “Developing an Austenitic Stainless Steel for Improved Performance in Advanced Fossil Power Facilities”, Journal of Metals, July (1989)
Rabensteiner, G. “ The Welding of Fully Austenitic Stainless Steels With High Molybdenum Contents”, Welding In The World, Vol. 27, No. 1 /2 (1989).
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 1990 Chapman and Hall
About this paper
Cite this paper
Lundin, C.D. (1990). Materials and Their Weldability for the Power Generation Industry. In: North, T.H. (eds) Advanced Joining Technologies. Springer, Dordrecht. https://doi.org/10.1007/978-94-009-0433-0_16
Download citation
DOI: https://doi.org/10.1007/978-94-009-0433-0_16
Publisher Name: Springer, Dordrecht
Print ISBN: 978-94-010-6679-2
Online ISBN: 978-94-009-0433-0
eBook Packages: Springer Book Archive