Advertisement

3D Reverse Modeling and Rapid Prototyping of Complete Denture

  • Dantong Li
  • Xiaobao Feng
  • Ping Liao
  • Hongjun Ni
  • Yidan Zhou
  • Mingyu Huang
  • Zhiyang Li
  • Yu Zhu
Conference paper
Part of the Lecture Notes in Electrical Engineering book series (LNEE, volume 269)

Abstract

An integrated method of reverse engineering and rapid prototyping technology to manufacture complete denture was presented in this paper. Firstly, geometrical surfaces of complete denture were measured by three-dimensional scanner and their point clouds were obtained. Then the point clouds de-noising processing was performed,data was filtered and reduced, the missing data was repaired and triangular surfaces splicing was realized in Geomagic software. 3D model of complete denture was reconstructed in Pro/E software, and the STL file was generated. Finally, the entity model was manufactured by rapid prototyping machine. Through this process the entity model of running-in-period complete denture was manufactured, which can reduce denture repairing time and contribute to health and medical research.

Keywords

Reverse engineering  Complete denture 3D model reconstruction Rapid prototyping 

Notes

Acknowledgments

This work was supported by A Project Funded by the Priority Academic Program Development of Jiangsu Higher Education Institutions and A Project Funded by the Graduate Workstation of Jiangsu Enterprises.

References

  1. 1.
    Xiong YF, Qiu JH, Chu SH (2011) Selection and evaluation of different skull moulding materials. Chin J Clin 5(17):5119–5121Google Scholar
  2. 2.
    Anne P, Matthias H, Paul F et al (2012) Bonding of acrylic denture teeth to MMA/PMMA and light-curing denture base materials: the role of conditioning liquids. J Dent 40:210–221CrossRefGoogle Scholar
  3. 3.
    Zhang XP (2009) Application of reverse engineering in industry. Mach Manuf Res 8:108–111Google Scholar
  4. 4.
    Chen DM, Liu YR, Liu J (2009) Reconstruction of skull using the rapid prototyping preprocessing technologies. J Biomed Eng Res 28(3):215–218Google Scholar
  5. 5.
    Gittard SD, Roger N, Jason L (2009) Rapid prototyping of scaphoid and lunate bones. Biotechnol J 4(1):129–134Google Scholar
  6. 6.
    Bai ZH, Zhang Y, Yin QS (2010) Bibliometric analysis of rapid prototyping techniques in the field of orthopaedics. 14(48):9046–9050 Google Scholar
  7. 7.
    Deng M, Su XH (2010) Application of silicone rubber materials in repair of complete denture. J Clin Rehabil Tissue Eng Res 14(25):4645–4648Google Scholar
  8. 8.
    He YY (2011) Design of link rapid prototyping based on reverse engineering. Small Inter Combust Engine Motorcycle 40(2):69–71Google Scholar
  9. 9.
    Peng YJ, Wang S, Peng XO (2011) Applied research of UG and imageware in 3-D model reconstruction of reverse engineering. Mach Des Manuf 5:85–87Google Scholar
  10. 10.
    Fan HZH, Liu J, Yu N (2007) Data Pre- processing for data from cross section scan in reverse engineering. Mach Des Manuf 9:71–73Google Scholar
  11. 11.
    Akemi G, Andres I, Jaime PP (2012) Iterative two-step genetic-algorithm-based method for efficient polynomial B-spline surface reconstruction. Inf Sci 182:56–76CrossRefGoogle Scholar
  12. 12.
    Giordanoa M, Ausiello P, Martorelli M (2012) Accuracy evaluation of surgical guides in implant dentistry by non-contact reverse engineering techniques. Dent Mater 28:178–185CrossRefGoogle Scholar
  13. 13.
    Dai J L (2006) A research on preprocessing algorithms of mass point cloud. ZheJiang, ChinaGoogle Scholar
  14. 14.
    Zhou L, Lin H, Zhong YX et al (2004) The thinning method for measued points cloud in surface reconstruction. Manuf Inf Eng China 33(5):102–104Google Scholar
  15. 15.
    Liu Y, Hu ZHY, Liu YSH (2010) Surface reconstruction about buckle based on imageware. Mach Build Autom 39(5):117–119Google Scholar
  16. 16.
    Wang J, Gu DX, Yu ZY et al (2012) A framework for 3D model reconstruction in reverse engineering. Comput Ind Eng 63:1189–1200CrossRefGoogle Scholar
  17. 17.
    Zhu Y, Wu XJ, Lv JJ et al (2011) Three-dimensional reconstruction of dentures based on general CAD technology. J Clin Rehabil Tissue Eng Res 15(13):2345–2348Google Scholar
  18. 18.
    Giordanoa M, Ausiello P, Martorelli M (2012) Accuracy evaluation of surgical guides in implant dentistry by non-contact reverse engineering techniques. Dent Mater 28:178–185Google Scholar

Copyright information

© Springer Science+Business Media Dordrecht 2014

Authors and Affiliations

  • Dantong Li
    • 1
  • Xiaobao Feng
    • 1
  • Ping Liao
    • 1
  • Hongjun Ni
    • 1
  • Yidan Zhou
    • 1
  • Mingyu Huang
    • 1
  • Zhiyang Li
    • 1
  • Yu Zhu
    • 1
  1. 1.School of Mechanical EngineeringNantong UniversityNantongChina

Personalised recommendations