Abstract
In gear hobbing, it is important that improving productivity for gear manufacturing is increased by using carbide tipped hob with heatproof. However, damage might occur in the tool at the early stage when the cutting condition is mistaken, and the tool life be shortened extremely. Therefore, when carbide tipped hob is applied for gear cutting, it is important to understand the characteristic of it enough, and to understand the condition for the tool life. In this study, the factor of the damage of the carbide tool is systematically examined. The chipping factor of the carbide tool, i.e. carbide material, cutting velocity, feed, grinding condition for tool face, is investigated by using modified machining center and fly tool.
Keywords
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Ariura Y, Umezaki Y, Nara H (1989) Finish hobbing of medium-hardness gears with cermet tipped hobs. In: Proceedings of the 1989 international power transmission and gearing conference, pp 691–696
Ishimaru R, Sakuragi I, Izumi N (2011) A fundamental study on the improvement for chipping characteristics in gear hobbing. Jpn Soc Mech Eng (Preprint). No.11-1, S112012
Sakagami K (1987) A study for bending and compressive fatigue characteristics of carbide steel. Academic dissertation, pp 16–22
Sakuragi I, Yonekura M, Hiroo Y, Nagano K (1994) A fundamental study of the carbide hob—for the carbide material of the carbide hob -. Mem Kurume National Coll Technol 9(2):1–14
Sakuragi I, Hiroo Y, Yonekura M (2001) Study on practical application of carbide hobbing—full depth cutting of hardened gear teeth-. In: Proceedings of international conference on motion and power transmissions, vol 1, pp 321–326
Umezaki Y, Ariura Y, Matsumoto H, Yoshimura K, Kimura D (2001) Transient phenomenon of chip generations and movements in hobbing. In: Proceedings of international conference on motion and power transmissions, vol 1, pp 327–332
Umezaki Y, Ariura Y, Suzuki T, Ishimaru R (2008) High-speed finishing of hard gear teeth with cBN-tipped hob. Int J Autom Technol 2(5):348–353
Yoshikawa A, Suzuki I, Suzuki K, Tsujigo Y, Yamamoto Y, (1987) Diamond tool, Nikkei Gizyutsu Tosho, p 475
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2013 Springer Science+Business Media Dordrecht
About this paper
Cite this paper
Ishimaru, R., Sakuragi, I., Izumi, N. (2013). A Fundamental Study on the Improvement for Chipping Characteristics in Gear Hobbing with Carbide Tipped Hob. In: Dobre, G. (eds) Power Transmissions. Mechanisms and Machine Science, vol 13. Springer, Dordrecht. https://doi.org/10.1007/978-94-007-6558-0_43
Download citation
DOI: https://doi.org/10.1007/978-94-007-6558-0_43
Published:
Publisher Name: Springer, Dordrecht
Print ISBN: 978-94-007-6557-3
Online ISBN: 978-94-007-6558-0
eBook Packages: EngineeringEngineering (R0)