Advertisement

Design of Microstrip Patch Antenna for Mobile Communication Systems Using Single-Feed

  • Chanhong Park
Conference paper
Part of the Lecture Notes in Electrical Engineering book series (LNEE, volume 215)

Abstract

Efforts to downsize antennas were mostly made in microstrip antenna with great success and progress in a wide variety of fields. Using dielectric substance is one way to downsize antennas but it hinders such antenna characteristics as antenna bandwidth and radiation efficiency. Because of such limitations, there is an ongoing research to modify antenna structure. Radiation pattern of small antennas becomes nearly non-directional and antenna gain becomes lower. Furthermore, bandwidth gets narrower because of weakened input resistance and extremely high reactance. Developing a small-sized antenna that is free of such shortcomings is not easy and the major job is to downsize antennas while matching impedance to protect its characteristic. In this paper, we proposed novel particle swarm optimization method based on IE3D is used to design a mobile communication Microstrip Patch Antenna. The aim of the thesis is to Design and fabricate an inset fed rectangular Microstrip Antenna and study the effect of antenna dimensions Length (L), Width (W) and substrate parameters relative Dielectric constant (εr), substrate thickness on Radiation parameters of Band width. When the antenna was designed, a dual-band, dual-polarized antenna was used to secure the bandwidth and improve performance, and a coaxial probe feeding method so that the phased array of antenna is easy.

Keywords

Microstrip patch antenna Mobile communication antenna PSO IE3D 

References

  1. 1.
    Finkenzeller K (2003) RFID handbook, 2nd edn. Wiley, EnglandCrossRefGoogle Scholar
  2. 2.
    Lier I, Jakobsen KR (1983) Rectangular microstrip patch antennas with infinite and finite ground-plane dimension. IEEE Trans Antennas Propag AP-31(6):978–984Google Scholar
  3. 3.
    Mailoux RJ (1987) On the use of metallized cavities in printed slot arrays with dielectric substrates. IEEE Trans Antennas Propag AP-35(5):477–487Google Scholar
  4. 4.
    Ikonen PMT, Rozanov KN, Osipov AV, Alitalo P, Tretyakov SA (2006) Magneto-dielectric substrate in antenna miniaturization: potential and limitations. IEEE Trans Antennas Propag 54(7):3391–3399CrossRefGoogle Scholar
  5. 5.
    Ruiming Z, Xin Z, Xi L, Qun P, Yinglong F, Dacheng Y (2009) Performance evaluation on the coexistence scenario of two 3GPP LTE system. VTC 2009-Fall 3(2):213–221Google Scholar
  6. 6.
    Song M-H, Woo J-M (2003) Miniaturisation of microstrip patch antenna using perturbation ofradiating slot. IEEE Electr Lett 39(5):417–419CrossRefGoogle Scholar
  7. 7.
    Seo J-S, Woo J-M (2004) Miniaturisation of micostrip antenna using irises. IEEE electr Lett 40(12):718–719CrossRefGoogle Scholar
  8. 8.
    Lier I, Jakobsen KR (1983) Rectangular microstrip patch antennas with infinite and finite ground-plane dimension. IEEE Trans Antennas Propag AP-31(6):978–984Google Scholar
  9. 9.
    Fang ST A novel polarization diversity antenna for WLAN applications. In: Proceeding of IEEE antennas and propagation society International Symposium Salt Lake City, vol 2, no 1. pp 282–285Google Scholar
  10. 10.
    Shelokar PS (2007) Particle swarm and ant colony algorithms hybridized for improved continuous optimization. Appl Math Comput 188(1):129–142Google Scholar
  11. 11.
    Kennedy J, Eberhart R (1995) Particle swarm optimization. Proc IEEE Int Conf Neural Netw 4(2):1942–1948CrossRefGoogle Scholar

Copyright information

© Springer Science+Business Media Dordrecht 2013

Authors and Affiliations

  1. 1.SamSun Technology Research Co. Ltd.Company-affiliated ResearchBucheon-siKorea

Personalised recommendations