An M2M-Based Interface Management Framework for Vehicles with Multiple Network Interfaces

  • Hong-Jong Jeong
  • Sungwon Lee
  • Dongkyun Kim
  • Yong-Geun Hong
Conference paper
Part of the Lecture Notes in Electrical Engineering book series (LNEE, volume 215)


The Intelligent Transportation System (ITS) can be considered the most representative example of Machine-to-Machine (M2M) applications in a standardization and commercial market. To support the applications, utilizing multiple network interfaces and providing appropriate network connectivity to them are the key issues in order to meet different network requirements of M2M applications on ITS devices. Moreover, different from applications which are controlled by a human operator, the ITS device with M2M application is required to decide the appropriate air interface and network for each application by itself according to the predefined policy and network status. In this paper, we therefore propose a novel multiple network interface management framework for ITS devices with M2M applications having their different requirements and constraints based on the CALM architecture. This can provide the M2M applications with extensible and flexible system environments based on the CALM architecture.


M2M Machine-to-machine ITS Communication Multiple interfaces CALM 



This research was supported by the MKE (The Ministry of Knowledge Economy), Korea, under the CITRC (Convergence Information Technology Research Center) support program (NIPA-2012-H0401-12-1006) supervised by the NIPA (National IT Industry Promotion Agency). This research was also supported by the ICT Standardization program of KCC (Korea Communications Commission). This research was also supported by Kyungpook National University Research Fund, 2012.


  1. 1.
    Wu G, Talwar S, Johnsson K, Himayat N, Johnson KD (2011) M2M: from mobile to embedded internet. IEEE Commun Mag 49(4):36–43Google Scholar
  2. 2.
    Chen B, Cheng HH (2010) A review of the applications of agent technology in traffic and transportation systems. IEEE Trans Intell Transp Syst 11(2):485–497Google Scholar
  3. 3.
    ETSI (2010) Machine to machine communications (M2M): use cases of automotive applications in M2M capable networks, ETSI TR 102 898 V0.4.0, Sept 2010Google Scholar
  4. 4.
    ISO/TC TC204/SC WG16 (2012) Intelligent transport systems—communications access for land mobiles (CALM)—architecture, ISO/WD 21217, March 2012Google Scholar
  5. 5.
    Williams B (2006) CALM handbook v3, CALM forum, March 2006Google Scholar
  6. 6.
    IEEE P1609.1 SWG et al (2009) IEEE P1609.1 trial-use standard for wireless access in vehicular environments (WAVE) resource manager, IEEE P1609.1 D0.6, June 2009Google Scholar
  7. 7.
    IEEE P1609.2 SWG et al (2009) IEEE P1609.2 trial-use standard for wireless access in vehicular environments—security services for applications and management messages, IEEE P1609.2 D07, June 2009Google Scholar
  8. 8.
    IEEE P1609.3 SWG et al (2009) IEEE P1609.3 wireless access in vehicular environments (WAVE) networking services, IEEE P1609.3 D1.2, June 2009Google Scholar
  9. 9.
    IEEE P1609.4 SWG et al (2009) IEEE P1609.4 trial-use standard for wireless access in vehicular environments (WAVE)—multi-channel operation, IEEE P1609.4 D12, June 2009Google Scholar

Copyright information

© Springer Science+Business Media Dordrecht 2013

Authors and Affiliations

  • Hong-Jong Jeong
    • 1
  • Sungwon Lee
    • 2
  • Dongkyun Kim
    • 3
  • Yong-Geun Hong
    • 4
  1. 1.Department of Computer EngineeringKyungpook National UniversityDaeguSouth Korea
  2. 2.School of Electrical Engineering and Computer ScienceKyungpook National UniversityDaeguSouth Korea
  3. 3.School of Computer Science and EngineeringKyungpook National UniversityDaeguSouth Korea
  4. 4.Electronics and Telecommunications Research InstituteDaejeonSouth Korea

Personalised recommendations