Inelastic Constitutive Equation and Damage Evolution Equation of Material with Anisotropic Damage

Chapter
Part of the Solid Mechanics and Its Applications book series (SMIA, volume 185)

Abstract

The development of microvoids in materials usually depends on the direction of the applied stress, and hence the material damage is essentially anisotropic. In this chapter we consider the damage mechanics theories of the constitutive and the evolution equations of materials with anisotropic damage.

Keywords

Damage Development Projection Tensor Anisotropic Damage Unilateral Effect Damage Tensor 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

References

  1. Besson J, Cailletaud G, Chaboche J-L, Forest S, Blétry M (2010) Non-linear mechanics of materials. Springer, DordrechtGoogle Scholar
  2. Chaboche JL (1992) Damage induced anisotropy: on the difficulties associated with the active/passive unilateral condition. Int J Damage Mech 1:148–171CrossRefGoogle Scholar
  3. Chaboche JL (1993) Development of continuum damage mechanics for elastic solids sustaining anisotropic and unilateral damage. Int J Damage Mech 2:311–329CrossRefGoogle Scholar
  4. Chaboche JL, Lesne PM, Maire JF (1995) Continuum damage mechanics, anisotropy and damage deactivation for brittle materials like concrete and ceramic composites. Int J Damage Mech 4:5–22CrossRefGoogle Scholar
  5. Chow CL, Lu TJ (1989b) On evolution laws of anisotropic damage. Eng Fract Mech 34:679–701CrossRefGoogle Scholar
  6. Chow CL, Wang J (1987) An anisotropic theory of continuum damage mechanics for ductile fracture. Eng Fract Mech 27:547–558CrossRefGoogle Scholar
  7. Chow CL, Wang J (1988) A finite element analysis of continuum damage mechanics for ductile fracture. Int J Fract 38:83–102Google Scholar
  8. Halm D, Dragon A, Charles Y (2002) A modular damage model for quasi-brittle solids – interaction between initial and induced anisotropy. Arch Appl Mech 72:498–510MATHCrossRefGoogle Scholar
  9. Hansen NR, Schreyer HL (1994) A thermodynamically consistent framework for theories of elastoplasticity coupled with damage. Int J Solids Struct 31:359–389MATHCrossRefGoogle Scholar
  10. Hayakawa K, Murakami S (1997) Thermodynamical modeling of elastic-plastic damage and experimental validation of damage potential. Int J Damage Mech 6:333–363CrossRefGoogle Scholar
  11. Hayakawa K , Murakami S, Liu Y (1998) An irreversible thermodynamic theory for elastic-plastic-damage materials. Eur J Mech A/Solids 17:13–32MATHCrossRefGoogle Scholar
  12. Ju JW (1989) On energy-based coupled elastoplastic damage theories: constitutive modeling and computational aspects. Int J Solids Struct 25:803–833MATHCrossRefGoogle Scholar
  13. Lubarda VA, Krajcinovic D, Mastilovic S (1994) Damage model for brittle elastic solids with unequal tensile and compressive strengths. Eng Fract Mech 49:681–697CrossRefGoogle Scholar
  14. Maugin GA (1992) The thermomechanics of plasticity and fracture. Cambridge University Press, CambridgeMATHCrossRefGoogle Scholar
  15. Ortiz M (1985) A constitutive theory for the inelastic behavior of concrete. Mech Mater 4:67–93CrossRefGoogle Scholar
  16. Simo JC, Ju JW (1987) Strain- and stress-based continuum damage models, I. Formulation; II. Computational aspects. Int J Solids Struct 23:821–869MATHCrossRefGoogle Scholar
  17. Yazdani S, Schreyer HL (1988) An anisotropic damage model with dilatation for concrete. Mech Mater 7:231–244CrossRefGoogle Scholar
  18. Chaboche JL, Lesné O, Pottier T (1998) Continuum damage mechanics of composites; towards a unified approach. In: Voyiadjis GZ, Ju JW, Chaboche JL (eds) Damage mechanics in engineering materials. Elsevier, Amsterdam, pp 3–26CrossRefGoogle Scholar

Copyright information

© Springer Science+Business Media B.V. 2012

Authors and Affiliations

  1. 1.Nagoya UniversityNagoyaJapan

Personalised recommendations