Abstract
A software tool, known as a PBEE toolbox, for the seismic performance assessment of buildings, which was developed in Matlab in conjunction with the software framework OpenSees, and a web application for the prediction of approximate IDA curves are presented in this chapter. Although, in its present version, the PBEE toolbox supports only simple nonlinear models, its capabilities exceed usual software tools for computational simulation, since it enables seismic performance assessment of buildings with various procedures and adopts an open-source philosophy so that it can be easily extended or modified to suit specific user requirements. The capabilities of the PBEE toolbox and the web application, which involves the response database of a single-degree-of-freedom system with a quadrilateral force-displacement relationship, are demonstrated by means of an assessment of the seismic response parameters of an eight-storey reinforced concrete frame, using incremental dynamic analysis, progressive incremental dynamic analysis, approximate incremental dynamic analysis, and the N2 method. It is shown that, for the case of the presented example, all the methods produce similar results, although each method has some advantages and some disadvantages.
Keywords
This is a preview of subscription content, log in via an institution.
Buying options
Tax calculation will be finalised at checkout
Purchases are for personal use only
Learn about institutional subscriptionsReferences
Antoniou S, Pinho R (2004) Development and verification of a displacement-based adaptive pushover procedure. J Earthquake Eng 8:643–661
Aydinoğlu MN (2003) An incremental response spectrum analysis based on inelastic spectral displacement for multi-mode seismic performance evaluation. Bull Earthquake Eng 1:3–36
Azarbakht A, Dolšek M (2011) Progressive incremental dynamic analysis for first-mode dominated structures. J Struct Eng 137:445–455
Causevic M, Mitrovic S (2011) Comparison between non-linear dynamic and static seismic analysis of structures according to European and US provisions. Bull Earthquake Eng 9:467–489
CEN (2004a) Eurocode 8: Design of structures for earthquake resistance. Part 1: General rules, seismic action and rules for buildings. EN 1998-1, European Committee for Standards, Brussels, Dec 2004
CEN (2004b) Eurocode 2: Design of concrete structures. Part 1-1: General rules and rules for buildings. EN 1992-1-1, European Committee for Standards, Brussels, Dec 2004
CEN (2005) Eurocode 8: Design of structures for earthquake resistance. Part 3: Strengthening and repair of buildings. EN 1998-3, European Committee for Standards, Brussels, Mar 2005
Chopra AK, Goel RK (2002) A modal pushover analysis for estimating seismic demands for buildings. Earthquake Eng Struct Dyn 31:561–582
CSI (2006) PERFORM-3D User guide, Version 4. Computers & Structures Inc., Berkeley
CSI (2008) SAP 2000 User manual, Version 12. Computers & Structures Inc., Berkeley
Dolsek M (2010) Development of computing environment for the seismic performance assessment of reinforced concrete frames by using simplified nonlinear models. Bull Earthquake Eng 8:1309–1329. doi:10.1007/s10518-010-9184-8
Dolšek M, Fajfar P (2007) Simplified probabilistic seismic performance assessment of plan-asymmetric buildings. Earthquake Eng Struct Dyn 36:2021–2041
Ellingwood BR, Kinali K (2009) Quantifying and communicating uncertainty in seismic risk assessment. Struct Saf 31:179–187
Elnashai AS, Papanikolaou VK, Lee DH (2008) Zeus NL – A System for Inelastic Analysis of Structures, User Manual, Version 1.8.7
Fajfar P (2000) A nonlinear analysis method for performance-based seismic design. Earthquake Spectra 16:573–592
Fajfar P, Dolšek M, Marušić D, Stratan A (2006) Pre- and post-test mathematical modelling of a plan-asymmetric reinforced concrete frame building. Earthquake Eng Struct Dyn 35:1359–1379
FEMA (2000) Prestandard and commentary for the seismic rehabilitation of buildings. FEMA publication 356, Washington DC, Nov 2000
FEMA (2005) Improvement of nonlinear static seismic analysis procedures. FEMA publication 440, Washington, DC, June 2005
Klinc R, Dolenc M, Turk Ž (2009) Engineering collaboration 2.0: requirements and expectations. ITcon 14:473–488
Kosič M (2010) Design of eight-storey reinforced concrete frame building according to European standard Eurocode 8. Personal communication, 15 Dec 2010
MathWorks (2007) MATLAB the Language of Technical Computing. http://www.mathworks.com/
McKenna F, Fenves GL (2007) Open system for earthquake engineering simulation, Pacific Earthquake Engineering Research Center, Berkeley. http://opensees.berkeley.edu
MIDAS (2008) Pushover Analysis of RC structures as per EC8:2004, MidasGen Version 7.4.1, MIDAS Information Technologies Co, Ltd, Korea
Peruš I, Poljanšek K, Fajfar P (2006) Flexural deformation capacity of rectangular RC columns determined by the CAE method. Earthquake Eng Struct Dyn 35:1453–1470
Peruš I, Klinc R, Dolenc M, Dolšek M (2011) A web-based methodology for the prediction of approximate IDA curves. Earthquake Eng Struct Dyn (in review).
Priestley MJN, Kowalsky MJ (2000) Direct displacement-based seismic design of concrete buildings. Bull New Zeal Soc Earthquake Eng 33:421–444
SEISMOSOFT (2007) Seismostruct version 4. SeismoSoft Ltd., Messina
Takeda T, Sozen MA, Nielsen NN (1970) Reinforced concrete response to simulated earthquakes. J Struct Division 96:2557–2573
Vamvatsikos D, Cornell CA (2002) Incremental dynamic analysis. Earthquake Eng Struct Dyn 31:491–514
Vamvatsikos D, Cornell CA (2006) Direct estimation of the seismic demand and capacity of oscillators with multi-linear static pushovers through IDA. Earthquake Eng Struct Dyn 35:1097–1117
Acknowledgements
The results presented in this paper are based on work supported by the Slovenian Research Agency within the framework of the project High-throughput computing environment for seismic risk assessment (http://ice4risk.slo-projekt.info/) (J2-0845-0792-08). This support is gratefully acknowledged.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2011 Springer Science+Business Media B.V.
About this chapter
Cite this chapter
Dolšek, M., Klinc, R., Dolenc, M., Brozovič, M., Peruš, I. (2011). A Toolbox and Web Application for the Seismic Performance Assessment of Buildings. In: Dolšek, M. (eds) Protection of Built Environment Against Earthquakes. Springer, Dordrecht. https://doi.org/10.1007/978-94-007-1448-9_12
Download citation
DOI: https://doi.org/10.1007/978-94-007-1448-9_12
Published:
Publisher Name: Springer, Dordrecht
Print ISBN: 978-94-007-1447-2
Online ISBN: 978-94-007-1448-9
eBook Packages: Earth and Environmental ScienceEarth and Environmental Science (R0)