Abstract
A brief summary of the European research involving Large-scale testing is given. Present and near future opportunities to further advance knowledge on earthquake behaviour and performance of structures are depicted. Performance-Based Seismic Design (PBSD) and Risk Assessment are recalled in view of the definition of structural testing procedures and protocols and also in view of the type of tests required. The importance of non-structural components is highlighted. Some tests performed at ELSA in support of the European Design Code (Eurocode 8) and on assessment and retrofit of existing structures are summarized. As examples of more advanced testing technique, Pseudo-dynamic tests with nonlinear substructuring carried out on bridges, are illustrated. The contribution and role of Large-scale testing to the challenging development and implementation of PBSD are addressed.
Keywords
This is a preview of subscription content, log in via an institution.
Buying options
Tax calculation will be finalised at checkout
Purchases are for personal use only
Learn about institutional subscriptionsReferences
Carvalho EC (2009) Pre- and co-normative research needs for Eurocode 8. In: Proceedings of the SAFECAST workshop, JRC, Ispra, 5–7 October
CASCADE (2005) Series reports, LNEC, Lisbon
ECOEST-PREC8 (1996) Series reports, LNEC, Lisbon
ECOEST2-ICONS (2001) Series reports, LNEC, Lisbon
EFAST (2009) Design Study of a European facility for advanced seismic testing. http://efast.eknowrisk.eu/EFast/
EN1998-1 (2004) Eurocode 8: Design of structures for earthquake resistance – Part 1: General rules, seismic actions and rules for buildings. CEN-European Committee for Standardization Eurocodes (2010) Eurocodes – Building the Future. The European Commission website on the Eurocodes. http://eurocodes.jrc.ec.europa.eu
Fajfar P, Krawinkler H (2004) Performance-based seismic design concepts and implementation. In: Proceedings of an international workshop, Bled, Slovenia, June 28–July 1. PEER report 2004/05, Berkeley, CA, USA, ISBN 0-9762060-0-5
Fardis MN (2004) A European perspective to performance-based seismic design, assessment and retrofitting. In: Proceedings of the international workshop, Bled, Slovenia, June 28–July 1. PEER report 2004/05, Berkeley, CA, USA, ISBN 0-9762060-0-5
Fardis MN (2007) Pre- and co-normative research needs for Eurocode 8. In: Pre-normative research needs to achieve improved design guidelines for seismic protection in the EU. JRC scientific and technical report, EUR 22858 EN, ISSN 1018-5593
Fardis MN (2009) SERIES project overview. In: Proceedings of the workshop on opportunities for users to access European research infrastructures in earthquake engineering, Iasi, Romania, 13 July
Hadjian AS (2002) A general framework for risk-consistent seismic design. Eng Struct Dyn 31:601–626
Krawinkler H (1999) Challenges and progress in performance-based earthquake engineering. In: Proceedings of the international seminar on seismic engineering for tomorrow – in honour of Professor Hiroshi Akiyama, Tokyo, Japan, 26 November
Marazzi F, Molina F (2009) First EFAST workshop challenges, needs and open questions. JRC scientific and technical report, EUR 23822 EN, ISSN 1018-5593
Negro P, Pinto AV, Verzeletti G, Magonette GE (1996) PSD tests on a four-story R/C building designed according to Eurocodes. J of Struct Eng 122(11):1409–1417
Negro P, Mola E, Molina F, Magonette GE (2004) Full-scale PSD testing of a torsionally unbalanced three-storey non-seismic RC frame. In: Proceedings of the 13th WCEE, Vancouver, Canada
Pampanin S (2009) Emerging solutions for damage-resisting precast concrete buildings: an update on New Zealand’s practice and R&D. In: Proceedings of the SAFECAST workshop, JRC, Ispra, 5–7 October
Pegon P, Pinto AV (2000) Pseudo-dynamic testing with substructuring at the ELSA laboratory. Earthquake Eng Struct Dyn 29:905–925
Pinto AV (ed) (1996) Pseudo-dynamic and shaking table tests on RC bridges. ECOEST-PREC8 report No. 5, LNEC, Lisbon
Pinto AV (1998) Earthquake performance of structures: behavioural, safety and economical aspects. Special Publication N. I.98.111. Phd thesis, European Commission, Joint research centre, Ispra, Italy
Pinto AV, Varum H, Molina F (2002) Experimental assessment and retrofit of full-scale models of existing RC frames. In: Proceedings of the 12th European conference on earthquake engineering, London, Elsevier Science Ltd
Pinto AV, Negro P, Taucer F (2004a) Full-scale laboratory testing: strategies and procedures to meet the needs of PBEE. In: Proceedings of an international workshop, Bled, Slovenia, June 28–July 1. PEER report 2004/05, Berkeley, CA, USA, ISBN 0-9762060-0-5
Pinto AV, Pegon P, Magonette GE, Tsionis G (2004) Pseudo-dynamic testing of bridges using non-linear substructuring. Earthquake Eng Struct Dyn 33:1125–1146
Pinto AV, Pegon P, Taucer F (2006) Shaking table facilities and testing for advancement of earthquake engineering: international cooperation, experiences, values, chances. In: Proceedings of the 1st European conference on earthquake engineering and seismology, Geneva, Switzerland, 3–8 September
Pinto AV, Taucer F, Dimova S (2007) Pre-normative research needs to achieve improved design guidelines for seismic protection in the EU. JRC scientific and technical report, EUR 22858 EN, ISSN 1018-5593
SERIES, Seismic Engineering Research Infrastructures for European Synergies. http://www.series.upatras.gr/
Severn RT (2000) Earthquake engineering research infrastructures. In: Proceedings of the workshop – mitigation of the seismic risk: support to recently affected European countries, Belgirate 2000. JRC, Ispra, Italy
Spence R, Lopes M, Bisch Ph, Plumier A, Dolce M (2005) Earthquake risk reduction in the European Union: proposals for a European earthquake risk reduction programme – a discussion document, EAEE
Stoten DP, Gomez EG (1999) MCS adaptive control on shaking tables using retrofit strategies. IASTED conference on control, Banff, Canada
Taghavi S, Miranda E (2003) Response assessment of non-structural building elements. PEER report 2003/05, Berkeley, CA, USA
Taucer F (2005) Recent advances and future needs in experimental earthquake engineering. CASCADE series report No. 7, LNEC, Lisbon, ISBN 972-49-1971-4
Taucer F, Franchioni G (2005) Directory of European facilities for seismic and dynamic tests in support of industry. CASCADE series report No. 6, LNEC, Lisbon, ISBN 972-49-1970-6
Acknowledgements
Research results presented in this work were obtained from tests carried out in the framework of projects co-financed by the European Commission under R&D Framework Programmes. Credits are due to the following colleagues for the co-ordination and participation in the experimental campaigns: G. Magonette, J. Molina, P. Negro, P. Pegon, F. Taucer, H. Varum, E. Mola, G. Tsionis. The author thanks also H. Varum for the revision of the manuscript.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2010 Springer Science+Business Media B.V.
About this chapter
Cite this chapter
Pinto, A. (2010). Large Scale Testing. In: Garevski, M., Ansal, A. (eds) Earthquake Engineering in Europe. Geotechnical, Geological, and Earthquake Engineering, vol 17. Springer, Dordrecht. https://doi.org/10.1007/978-90-481-9544-2_15
Download citation
DOI: https://doi.org/10.1007/978-90-481-9544-2_15
Published:
Publisher Name: Springer, Dordrecht
Print ISBN: 978-90-481-9543-5
Online ISBN: 978-90-481-9544-2
eBook Packages: Earth and Environmental ScienceEarth and Environmental Science (R0)