Abstract
Implementation of proportional-integral (PI) controller for speed control of direct current (DC) servomotor drive is an emerging trend in recent years. PI controller is a simple effective method and it needs tuning of the control parameters to improve the performance of the converters. The local treatment of the parameter tuning is no longer possible and it is thus essential to design a suitable topology for flyback converters that has to reduce the overshoot and settling time. Here an advanced PI control algorithm has been framed that optimize the PI controller parameters using ant colony optimization and cuckoo search algorithm. The PI control algorithm is implemented in FPGA to drive the DC servomotor drive. Framing the conventional system with optimized PI control algorithm shows significant reduction of overshoot and settling time and works effectively for DC servomotor drive.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Zhang F, Yan Y (2009) Novel forward-flyback hybrid bidirectional DC–DC converter. IEEE Trans Ind Electron 56:1578–1584
Singh V, Garg VK (2014) Tuning of PID controller for speed control of DC motor using soft computing techniques—a review. Int J Appl Eng Res 9:1141–1148
Hong S-S, Ji S-K, Jung Y-J, Roh C-W (2010) Analysis and design of a high voltage flyback converter with resonant elements. J Power Electron. 10(2):107–114
Tacca HE (1998) Single-switch two-output flyback-forward converter operation. IEEE Trans Power Electron 13:903–911
Rong P, Chen W, Lu Z (2009) A novel active clamped dual switch flyback converter. IEEE power electron motion control conference, pp 1277–1281
Lee J-H, Park J-H, Jeon JH (2011) Series-connected forward-flyback converter for high step-up power conversion. IEEE Trans Power Electron 26:3629–3641
Kim D-H, Park J-H (2013) High efficiency step-down flyback converter using coaxial cable coupled-inductor. J Power Electron 13:214–222
Ayman AA (2011) PID parameters optimization using genetic algorithm technique for electrohydraulic servo control system. Intell Control Autom 2:69–76
Erdal C, Toker A, Acar C (2001) A new proportional-integral-derivative (pid) controller realization by using current conveyors and calculating optimum parameter tolerances. J Electric Electron 1:267–273
YaPing L, ShengChun Y, Ke W, Dan Z (2011) Research on PI controller tuning for VSC-HVDC system. IEEE international conference on advanced power system automation and protection, pp 261–264
Bassi SJ, Mishra MK, Omizegba EE (2011) Automatic tuning of proportional–integral–derivative (pid) controller using particle swarm optimization (pso) algorithm. Int J Artif Intell Appl (IJAIA) 2:25–34
Wang L, Ertugrul N (2010) Selection of PI compensator parameters for VSCHVDC system using decoupled control strategy. IEEE universities power engineering conference (AUPEC), pp 1–7
Popadic B, Dumnic B, Milicevic D, Katic V, Corba Z (2013) Tuning methods for PI controller—comparison on a highly modular drive. IEEE
Rai P, Shekher V, Prakash O (2012) Determination of stabilizing parameter of fractional order PID controller using genetic algorithm. IJCEM Int J Comput Eng Manag 15:24–32
Ohri J, Kumar N, Chinda M An improved genetic algorithm for PID parameter tuning. Recent Adv Electr Comput Eng 191–198
Girirajkumar SM, Kumar AA, Anantharaman N (2010) Tuning of a PID controller for a real time industrial process using particle swarm optimization. IJCA special issue on evolutionary computation for optimization techniques (ECOT), pp 35–40
Syed FU, Yin H (2006) Rule-based fuzzy gain-scheduling P1 controller to improve engine speed and power behavior in a power-split hybrid electric vehicle. IEEE, pp 284–289
Abidin NZ, Sahlan S, Wahab NA (2013) Optimization tuning of pi controller of quadruple tank process. IEEE Australian control conference, pp 331–335
Utomo WM, Yi SS, Buswig YMY, Haron ZA, Bakar AA, Ahmad MZ (2012) Voltage tracking of a DC-DC flyback converter using neural network control. Int J Power Electron Drive Syst (IJPEDS) 2:35–42
Bagis A (2007) Determination of the PID controller parameters by modified genetic algorithm for improved performance. J Inf Sci Eng 23:1469–1480
Awouda AE, Mamat RB Optimizing PID tuning parameters using grey prediction algorithm. Int J Eng (IJE) 4:26–36
Shayma’a AM (2014) Optimization of PID controller parameters based on genetic algorithm for non-linear electromechanical actuator. Int J Comput Appl 94:11–20
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2016 Springer India
About this paper
Cite this paper
Subiramoniyan, S., Joseph Jawhar, S. (2016). Modern Optimization-Based Controller Design for Speed Control in Flyback Converter-Driven DC Servomotor Drive. In: Suresh, L., Panigrahi, B. (eds) Proceedings of the International Conference on Soft Computing Systems. Advances in Intelligent Systems and Computing, vol 397. Springer, New Delhi. https://doi.org/10.1007/978-81-322-2671-0_2
Download citation
DOI: https://doi.org/10.1007/978-81-322-2671-0_2
Published:
Publisher Name: Springer, New Delhi
Print ISBN: 978-81-322-2669-7
Online ISBN: 978-81-322-2671-0
eBook Packages: EngineeringEngineering (R0)