Advertisement

Investigation on Power Saving Mechanism for IEEE 802.16m Networks in Mobile Internet Traffic

  • A. Rajesh
  • R. Nakkeeran
Conference paper
Part of the Advances in Intelligent Systems and Computing book series (AISC, volume 309)

Abstract

In IEEE 802.16m networks, the existing power saving models (PSMs) had been developed by assuming traffic as Poisson arrival with exponential interarrival time or generalized traffic process. However, the mobile Internet traffic presumes Pareto/Weibull arrival with Pareto interarrival time. The existing PSM with this traffic causes frequent battery drain out at the mobile stations (MSs) with inappropriateness of the sleep parameters. Hence, in this paper, a PSM is derived for MS with mobile Internet traffic by considering the traffic parameters, namely scaling, shaping and location or threshold. A combined power saving class (PSC) is also suggested to improve the system performance with the developed PSM. The effectiveness of the developed model is validated by means of numerical results.

Keywords

Power saving class IEEE 802.16m Power saving model 

References

  1. 1.
    IEEE Standard for Local and Metropolitan Area Networks: Part 16: Air Interface for Fixed and Mobile Broadband Wireless Access Systems. IEEE P802.16m/D4 (2010)Google Scholar
  2. 2.
    Ghani, S., Iradat, F.: Loss probability in networks with Pareto distributed traffic. In: Proceedings of IEEE 2nd International Conference on Intelligent Systems, Modelling and Simulation, pp. 355–360 (2011)Google Scholar
  3. 3.
    Singhai, R., Joshi, S.D., Bhatt, R.K.P.: Offered-load model for Pareto inter-arrival network traffic. In: Proceedings of IEEE 34th Conference on Local Computer Networks, pp. 364–367 (2009)Google Scholar
  4. 4.
    Zhang, Y., Xiao, Y., Leung, V.C.M.: Energy management analysis and enhancement in IEEE 802.16e WirelessMAN. IEEE Trans. Veh. Technol. 58(7), 3738–3752 (2009)Google Scholar
  5. 5.
    Xiao, Y.: Energy saving mechanism in the IEEE 802.16e wireless MAN. IEEE Commun. Lett. 9(7), 595–597 (2005)Google Scholar
  6. 6.
    Kwon, S.-W., Cho, D.-H: Enhanced power saving through increasing unavailability interval in the IEEE 802.16e systems. IEEE Commun. Lett. 14(1), 24–26 (2010)Google Scholar
  7. 7.
    Tseng, Y.-C., Chen, J.-J., Yang, Y.-C.: Managing power saving classes in IEEE 802.16 wireless MANs: a fold-and-demultiplex method. IEEE Trans. Mob. Comput. 10(9), 1237–1247 (2011)Google Scholar
  8. 8.
    Jin, S., Chen, X., Qiao, D.: Analytical modeling of inactivity timer in IEEE 802.16m sleep mode. IEEE Commun. Lett. 16(5), 650–653 (2012)Google Scholar
  9. 9.
    Almhana, J., Liu, Z., McGorman, R.: Nearly optimal power saving policies for mobile stations in wireless networks. Elsevier Comput. Commun. 33(1), 595–602 (2010)Google Scholar
  10. 10.
    Wong, D.T.C., Kong, P.-Y., Liang, Y.-C., Chua, K.C., Mark, J.W.: Wireless broadband networks. Wiley (2009)Google Scholar
  11. 11.
    Rajesh, A., Nakkeeran, R.: Performance analysis of unified power saving mechanism for IEEE 802.16m networks. In: Proceedings of IEEE 2nd World Congress on Information and Communication Technologies (WICT’12), pp. 1–5. IIITM, Kerala (2012) Google Scholar
  12. 12.
    Lin, Y.-W., Wang, J.-S.: An adaptive QoS power saving scheme for mobile WiMAX. Springer Wireless Pers. Commun. 69(4), 1435–1462 (2013)Google Scholar
  13. 13.
    Ferng, H.-W., Li, H.-Y.: Design of predictive and dynamic energy-efficient mechanisms for IEEE 802.16e. Springer Wireless Pers. Commun. 68(4), 1807–1835 (2013)Google Scholar

Copyright information

© Springer India 2015

Authors and Affiliations

  1. 1.School of Electronics EngineeringVIT UniversityVelloreIndia
  2. 2.Department of Electronics Engineering, School of Engineering and TechnologyPondicherry UniversityPuducherryIndia

Personalised recommendations