Abstract
New technology products are continuously replacing the older ones especially in medical devices. The time interval between successive technologies of medical devices is less. This reduces the impact of new technology in terms of adoption, product effectiveness and efficiency. Organizations face tighter targets with respect to new technology introduction due to lack of developmental time. Stringent government regulations further concern the medical device industry in terms of new technology selection, product development and effective diffusion. A systematic approach towards technology development helps the medical device industry to foresee the issues related to technology with respect to policy planner, manufacturer and user. Morphological analysis is employed in this chapter to discuss the possible issues of Indian medical device industry from the perspective of policy planners, manufacturers and users.
Keywords
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Notes
- 1.
PPN is a list of hospitals that can claim dues directly from the insurer instead of charging the patient.
- 2.
Based on how patients interact with medical system in place; it focuses on diagnosis and treatment.
- 3.
Stakeholders behind the medical treatment to finance the cycle of care.
References
Abrams HL, Hessel S (1987) Health technology assessment, problems and challenges. Am J Roentgenol 149:1127–1132
Appelt P, Hauser T (2006) Prescribing innovations: a practical framework for effective marketing of medical device innovations. J Med Mark 6:195–202
Bass FM (1969) New product growth model for consumer durables. Manage Sci 15:215–227
Business India (2008) Driving medical device innovation, 1 June, pp 69–74
Business India (2011) Changing faces (Hospital survey), 24 July, pp 64–75
Businessworld (2010) Differential treatment, 17 July
Businessworld (2011) Health care opportunities, 25 April
Caceres CA, Yolken HT, Jones RJ, Piehler HR (1983) Medical devices: measurements, quality assurance and standards. American Technical Fub&shm Ltd., pp 306–312
Chanaron JJ, Jolly D (1999) Technological management: expanding the perspective of management of technology. Manage Decis 37:613–620
Cooper RG, Kleinschmidt EJ (1986) An investigation into the new product process: steps, deficiencies and impact. J Prod Innov Manage 3:71–85
Dankbaar B (1993) Research and technology management in enterprises: issues for community policy. Overall Strategic Review, EUR, 15438-EN, Brussels
Dodds W (1973) An application of the Bass model in long-term new product forecasting. J Market Res 10:308–311
Foote SB (1978) Loop and loopholes: hazardous device regulation under the 1976 medical device amendments to the food, drug and cosmetic act. Ecol Law Q 7:101–135
Gaynor GH (1996) Handbook of technology management. McGraw-Hill, New Delhi
Gregory MJ (1995) Technology management: a process approach. Proc Inst Mech Eng 209:347–356
Hall AD (1969) Three-dimensional morphology of systems engineering. IEEE Trans Syst Sci Cybern 5(2):156–160
Hauptman O, Roberts EB (1987) FDA regulation of product risk and its impact upon young biomedical firms. J Prod Innov Manage 4:138–148
Klepper S (1996) Entry, exit, growth and innovation over the product life cycle. Am Econ Rev 86:562–583
Nandakumar AK, Beswick J, Thomas CP, Wallack SS, Kress D (2009) Pathways of health technology diffusion: the United States and low-income countries. Health Aff 28:986–995
News Medical (2009) Comprehensive report on medical equipment in India. Published on 29 October
Peres R, Muller E, Mahajan V (2010) Innovation diffusion and new product growth models: A critical review and research directions, International Journal of Research in Marketing, 27:91–126
Phaal R, Farrukh CJP, Probert DR (2001) Technology management process assessment: a case study. Int J Oper Prod Manage 21:1116–1132
Rogers EM (1995) The diffusion of innovation, 3rd edn. Free Press, New York
Shurig R (1984) Morphology: a tool for exploring new technology. Long Range Plann 17:129–140
Skilbeck JN, Cruickshank CM (1997) A framework for evaluating technology management processes. Portland international conference on management of engineering and technology (PICMET), Portland, July
Torbica A, Cappellaro G (2010) Uptake and diffusion of medical technology innovation in Europe: what role for funding and procurement policies? J Med Market 10:61–69
Wu W, Liang D, Yu B, Yang Y (2010) Strategic planning for management of technology of China’s high technology enterprises. J Technol Manag China 5:6–25
Yoon B, Park Y (2005) A systematic approach for identifying technology opportunities: keyword-based morphology analysis. Technol Forecast Soc Change 75:145–160
Yoon B, Park Y (2007) Development of new technology forecasting algorithm: hybrid approach for morphology analysis and conjoint analysis of patent information. IEEE Trans Eng Manage 54:588
Zwicky F (1962) Morphology of propulsive power. Monograph 1. Society for Morphological Research, Pasadena
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2013 Springer India
About this paper
Cite this paper
Ramesh, A., Sai, L.P. (2013). Technology Management Issues in the Indian Medical Devices Industry: A Morphological Analysis. In: Mukhopadhyay, C., et al. Driving the Economy through Innovation and Entrepreneurship. Springer, India. https://doi.org/10.1007/978-81-322-0746-7_8
Download citation
DOI: https://doi.org/10.1007/978-81-322-0746-7_8
Published:
Publisher Name: Springer, India
Print ISBN: 978-81-322-0745-0
Online ISBN: 978-81-322-0746-7
eBook Packages: Business and EconomicsBusiness and Management (R0)