Abstract
Using a powder-jet-deposition process, a thick hydroxyapatite (HAp) film can be created on a human tooth surface. Two different types of HAp particles, calcinated at 1,200 and 1,300°C, were used. The HAp particle was mixed with nitrogen as the carrier gas to form an aerosol flow and then accelerated and blasted from the nozzle onto the enamel substrate at room temperature and atmospheric pressure. HAp particles in the deposited film were tightly packed. There was no gap between the HAp film and the enamel substrate. The bonding strength of the HAp film is almost the same as the composite resin on the enamel.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Reference
Noji M et al (2009) Characteristics of the hydroxyapatite film deposited on human enamel: deposition of a ceramic film by powder jet deposition technique. Int J Abrasive Technol 2:83–96
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2010 Springer
About this paper
Cite this paper
Akatsuka, R. et al. (2010). Formation of hydroxyapatite film on tooth using powder-jet-deposition. In: Sasano, T., Suzuki, O. (eds) Interface Oral Health Science 2009. Springer, Tokyo. https://doi.org/10.1007/978-4-431-99644-6_87
Download citation
DOI: https://doi.org/10.1007/978-4-431-99644-6_87
Publisher Name: Springer, Tokyo
Print ISBN: 978-4-431-99643-9
Online ISBN: 978-4-431-99644-6
eBook Packages: MedicineMedicine (R0)