Abstract
The manufacturing of multi-material components for the automotive industry adds additional process steps to the traditional process chain while also employing new manufacturing technologies. Both factors usually lead to higher production costs as well as higher energy demands and environmental impacts. Cyber physical production systems (CPPS) are a promising approach to support the design of multi-material components as well as the dimensioning and operation of the production processes. In the following article, the levers of CPPS for the manufacturing of multi-material components are discussed and illustrated within an automated calculation of component-specific energy consumption.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Cerdas F., Thiede S., Juraschek M., Turetskyy A. & Herrmann C. (2017). Shop-floor Life Cycle Assessment. Procedia CIRP, 61, 393–398. doi: https://doi.org/10.1016/j.procir.2016.11.178
Dunham M. H. (2003). Data Mining: Introductory and Advanced Topics. Pearson Education. ISBN:978–0–13–088892–1
Gellrich S., Beganovic T., Mattheus A., Herrmann C. & Thiede S. (2019a). Feature Selection Based on Visual Analytics for Quality Prediction in Aluminium Die Casting. IEEE 17th International Conference on Industrial Informatics (INDIN). 66–72. doi: https://doi.org/10.1109/INDIN41052.2019.8972093
Gellrich S., Filz M.-A., Wölper J., Herrmann C. & Thiede S. (2019b). DATA MINING APPLICATIONS IN MANUFACTURING OF LIGHTWEIGHT STRUCTURES. In: Dröder K, Vietor T, eds. Faszination Hybrider Leichtbau / Technologies for Economical and Functional Lightweight Design. Berlin, Heidelberg: Springer Vieweg; 15–27. doi: https://doi.org/10.1007/978-3-662-58206-0_2
Gieseke F., Airola A., Pahikkala T. & Kramer O. (2014). Fast and simple gradient-based optimization for semi-supervised support vector machines. Neurocomputing, 123, 23–32. doi: https://doi.org/10.1016/j.neucom.2012.12.056
Kang H. S., et al. (2016). Smart manufacturing: Past research, present findings, and future directions. Int. J. Precis. Eng. Manuf. - Green Technol., 3, 1, 111–128. doi: https://doi.org/10.1007/s40684-016-0015-5
Larose D. T. & Larose C. D. (2014). Discovering Knowledge in Data: An Introduction to Data Mining, Wiley Series on Methods and Applications in Data Mining. doi: https://doi.org/10.1002/9781118874059.ch1
Marz N. & Warren J. (2015). Big Data: Principles and best practices of scalable real-time data systems. Manning Publications. ISBN:9781617290343
Neef B., Bartels J. & Thiede S. (2018). Tool Wear and Surface Quality Monitoring Using High Frequency CNC Machine Tool Current Signature. IEEE 16th International Conference on Industrial Informatics (INDIN), 1045–1050. doi: https://doi.org/10.1109/INDIN.2018.8472037
Node-RED: Low-code programming for event-driven applications. Retrieved from https://nodered.org/ (last visited 04.08.2020)
SENTRON Messgeräte und Energiemonitoring. Retrieved from https://new.siemens.com/global/de/produkte/energie/niederspannung/komponenten/sentron-messgeraete-und-energiemonitoring.html (last visited 04.08.2020)
SIMATIC WinCC V7. Retrieved from https://new.siemens.com/global/de/produkte/automatisierung/industrie-software/automatisierungs-software/scada/simatic-wincc-v7.html (last visited 04.08.2020)
Thiede S. (2018). Environmental Sustainability of Cyber Physical Production Systems. Procedia CIRP, 69, 644–649. doi: https://doi.org/10.1016/j.procir.2017.11.124
Thiede S., Juraschek M. & Herrmann C. (2016). Implementing Cyber-physical Production Systems in Learning Factories. Procedia CIRP, 54, 7–12. doi: https://doi.org/10.1016/j.procir.2016.04.098
XDK Cross Domain Development Kit. Retrieved from https://xdk.bosch-connectivity.com/de/overview (last visited 04.08.2020)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2023 Springer-Verlag GmbH Germany, part of Springer Nature
About this chapter
Cite this chapter
Gellrich, S., Herrmann, C., Thiede, S. (2023). Levers of Cyber Physical Production Systems for Multi-Material Body Parts Manufacturing. In: Vietor, T. (eds) Life Cycle Design & Engineering of Lightweight Multi-Material Automotive Body Parts. Zukunftstechnologien für den multifunktionalen Leichtbau. Springer, Berlin, Heidelberg. https://doi.org/10.1007/978-3-662-65273-2_4
Download citation
DOI: https://doi.org/10.1007/978-3-662-65273-2_4
Published:
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-662-65272-5
Online ISBN: 978-3-662-65273-2
eBook Packages: EngineeringEngineering (R0)