Abstract
In assembly-line work the term cycle time refers to the period of time between the completion of one product and the completion of the next one. Against the context of work design this parameter is important as it seems to be related both to the physical and the mental well-being of workers as well as to their job satisfaction and their performance. In order to gain a better understanding of the underlying causal relationships a structural equation modeling approach was taken in this work. By this means it is possible to hypothesize on the interaction of variables and to test these hypotheses empirically. Within a field experimental study at an automobile manufacturing company it was shown that shorter cycle times lower the physical well-being of workers—but, however, this fact did not affect the overall performance outcome. Besides, it could have been shown that cycle-related working conditions in general—regardless of the length of cycle times—reduced the mental well-being of assembly workers. This result is important as the mental well-being did not only reinforce the physical conditions, but it turned out to be also relevant for the performance of the workers.
Keywords
This is a preview of subscription content, log in via an institution.
Buying options
Tax calculation will be finalised at checkout
Purchases are for personal use only
Learn about institutional subscriptionsReferences
Adler P, Goldoftas B, Levine D (1997) Ergonomics, employee involvement, and the Toyota production system: a case study of NUMMI’s 1993 Model Introduction. Ind Labor Relat Rev 50(3):416–437
Berggren C (1993) Alternatives to lean production: work organization in the Swedish auto industry, No. 22. Cornell University Press
Boysen N, Fliedner M, Scholl A (2008) Assembly line balancing: which model to use when? Int J Prod Econ 111:509–528
Burke RJ (1969–1970) Occupational and life strains, satisfaction and mental health. J Bus Admin 1:35–41
Büttner J (2015) Auswirkungen der Austaktung einer Automobil-Montagelinie auf menschliche Leistungsfaktoren, Otto-von-Guericke-Universität Magdeburg, Dissertationsschrift
Byrne BM (2001) Structural equation modeling with AMOS: basic concepts, applications, and programming. Erlbaum, Mahwah, NJ
Byrne B (2010) Structural equation modeling using AMOS, Basic concepts, applications, and programming, 2nd edn. Routledge, New York, NY
Fischer L, Lück HE (1972) Entwicklung einer Skala zur Messung von Arbeitszufriedenheit (SAZ). In: Psychologie und Praxis. H. 16, pp 64–76
Frieling E (Hrsg) (1997) Automobilmontage in Europa. Frankfurt/Main Campus
Frieling E, Kotzab D, Enriquez-Diaz A, Sytch A (2012) Mit der Taktzeit am Ende – die älteren Beschäftigten in der Automobilmontage, Ergonomia, vol 1. Auflage, Stuttgart
Fucini J, Fucini S (1990) Working for the Japanese: inside Mazda’s American auto plant. Free Press, New York, NY
Garrahan P, Stewart P (1992) The Nissan Enigma-flexibility at work in a local economy. Mansell, London
Herzberg F, Mausner B, Snyderman B (1959) The motivation to work. Wiley, New York, NY
Hoyle RH (1999) Statistical strategies for small sample research. Sage, Thousand Oaks, CA
Hu L, Bentler PM (1999) Cutoff criteria for fit indexes in covariance structure analysis: conventional criteria versus new alternatives. Struct Equ Model 6(1):1–55
Iffländer J, Schmicker S, Wassmann S (2013) Projektbericht, Erfassung psychischer Belastungen in der Cockpitmontage und Ableitung entsprechender Arbeitsgestaltungsempfehlungen – Projektnummer AZ-76988089, in Auftrag von der Volkswagen AG, durchgeführt von der Otto-von-Guericke-Universität Magdeburg – Fakultät für Maschinenbau – Institut für Arbeitswissenschaft, Fabrikautomatisierung und Fabrikbetrieb – Lehrstuhl für Arbeitswissenschaft und Arbeitsgestaltung in Kooperation mit der METOP GmbH – An-Institut der Otto-von-Guericke Universität Magdeburg
Judge T, Thoresen C, Bono J, Patton G (2001) The job satisfaction-job performance relationship: a qualitative and quantitative review. Psychol Bull 127(3):376–407
Kapellusch JM, Kapellusch JM, Garg A (2012) Conference proceeding: ergonomic cycle time: a proposed metric for the design of safe, productive manufacturing jobs. 10th International Conference on Manufacturing Research, Birmingham, England, 09/2012
Kvarnström S (1996) Stress prevention for blue-collar workers in assembly-line production, Conditions of work and welfare facilities branch. Working paper, Genf
Landsbergis PA, Cahill J, Schnall P (1999) The impact of lean production and related new systems of work organization on worker health. J Occup Health Psychol 4(2):108–130
Lewchuk W, Robertson D (1996) Working conditions under lean production: a worker based benchmarking study. Asia Pacific Bus Rev 2(4):60–81
Liker JK, Meier DP (2007) Praxisbuch der Toyota Weg: Für jedes Unternehmen. FinanzBuch Verlag, München
Liker JK (2007) Der Toyota Weg, 14 Managementprinzipien des weltweit erfolgreichsten Automobilkonzerns. FinanzBuch Verlag, München
Lin L, Drury C, Kim S-W (2001) Ergonomics and quality in paced assembly lines. Hum Factors Ergon Manuf 11(4):377–382
May DR, Gilson RL, Harter LM (2004) The psychological conditions of meaningfulness, safety and availability and the engagement of the human spirit at work. J Occup Organ Psychol 77:11–37
Melamed S, Ben-Avi I, Luz J, Green M (1995) Objective and subjective work monotony: effects on job satisfaction, psychological distress, and absenteeism in blue-collar workers. J Appl Psychol 80(1):29–42
Neuhaus R (2009) KPB – Kurzverfahren Psychische Belastung. Ein Verfahren zur Beurteilung psychischer Belastungen, 2. überarbeitete Auflage, Wirtschaftsverlag Bachem, Köln
Notbohm G (1984) Mehrfachbelastungen und Gesundheitsrisiken am Arbeitsplatz. In: Gros E (ed) Anwendungsbezogene Arbeits-, Betriebs- und Organisationspsychologie. Verlag Angewandte Psychologie, Göttingen
Nübling M, Stößel U, Hasselhorn H-M, Michaelis M, Hofmann F (2005) Methoden zur Erfassung psychischer Belastungen – Erprobung eines Messinstrumentes (COPSOQ), Bremerhaven, Wirtschaftsverlag NW (Schriftenreihe der Bundesanstalt für Arbeitsschutz und Arbeitsmedizin, Fb 1058)
Nunally JC (1978) Psychometric theory, 2nd edn. New York, NY
Pütz D (2010) Psychosoziale Einflussfaktoren bei Beschwerden am Bewegungsapparat. In: Gesellschaft für Arbeitswissenschaft e.V., Mensch- und Prozessorientierte Arbeitsgestaltung im Fahrzeugbau, Herbstkonferenz 2010 der Gesellschaft für Arbeitswissenschaft. Dortmund, GfA Press
Richter G (2000) Psychische Belastung und Beanspruchung – Stress, psychische Ermüdung, Monotonie, psychische Sättigung. In: BAuA (Hrsg), Arbeitswissenschaftliche Erkenntnisse: Forschungsergebnisse für die Praxis (Nr. 116), Bundesanstalt für Arbeitsschutz und Arbeitsmedizin, Dortmund, pp 1–13
Rimann M, Udris I (1997) Subjektive Arbeitsanalyse: Der Fragebogen SALSA. In: Strohm O, Ulich E (Hrsg), Unternehmen arbeitspsychologisch bewerten. Ein Mehr-Ebenen-Ansatz unter besonderer Berücksichtigung von Mensch, Technik und Organisation. Zürich, vdf Hochschulverlag, pp 281–298
Stewart P, Garrahan P (1995) Employee responses to new management techniques in the auto industry. Work Employ Soc 9(3):517–536
Tuomi K, Ilmarinen J, Jahkola A, Katajarinne L, Tulkki A (2001) Arbeitsbewältigungsindex – Work Ability Index, 1. Auflage, Wirtschaftsverlag NW Verlag für neue Wissenschaft GmbH, Bremerhaven, Schriftenreihe der Bundesanstalt für Arbeitsschutz und Arbeitsmedizin: Übersetzung, Ü 14
Udris I, Frese M (1999) Belastung und Beanspruchung. In: Hoyos Graf C, Frese D (Hrsg) Arbeits- und Organisationspsychologie – GL Lehrbuch. Psychologie Verlagsunion, Weinheim, pp 429–445
Weiber R, Mühlhaus D (2010) Strukturgleichungsmodellierung, Eine anwendungsorientierte Einführung in die Kausalanalyse mit Hilfe von AMOS. SmartPLS und SPSS, Heidelberg
Weyer G, Hodapp V, Neuhäuser S (1980) Weiterentwicklung von Fragebogenskalen zur Erfassung der subjektiven Belastung und Unzufriedenheit im beruflichen Bereich (SBUS-B). Psychologische Beiträge 22:335–355
Womack JP, Jones DT, Roos D (1991) The machine that changed the world. Harper-Perennial, New York, NY
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2016 Springer-Verlag Berlin Heidelberg
About this paper
Cite this paper
Büttner, J., Deml, B., Neveling, S. (2016). Consequences of Line Balancing of an Assembly Line on the Health, Satisfaction and Performance Indicators of Assembly Line Workers in a Case Study of an Automotive Manufacturer. In: Deml, B., Stock, P., Bruder, R., Schlick, C.M. (eds) Advances in Ergonomic Design of Systems, Products and Processes. Springer Vieweg, Berlin, Heidelberg. https://doi.org/10.1007/978-3-662-48661-0_29
Download citation
DOI: https://doi.org/10.1007/978-3-662-48661-0_29
Publisher Name: Springer Vieweg, Berlin, Heidelberg
Print ISBN: 978-3-662-48659-7
Online ISBN: 978-3-662-48661-0
eBook Packages: EngineeringEngineering (R0)