Abstract
This paper presents an interconnection bi-directional dc-dc converter for multi-rail DC distribution system. The principles of the energy conversion process, small signal modeling and controller design for the new topology are discussed in detail. The system parameters are carefully calculated for an intended application of automotive 14 V/42 V dual-bus DC distribution system. A double-zero-double-pole PI controller is designed to control the high rail voltage as well as bidirectional power. The simulation and experimental results show that the proposed topology has the advantages of power expansibility, smaller capacitance current stress and bidirectional operation. It is proved to be applicable in high current high temperature automotive DC distribution systems.
Keywords
This is a preview of subscription content, log in via an institution.
Buying options
Tax calculation will be finalised at checkout
Purchases are for personal use only
Learn about institutional subscriptionsReferences
Seo GS, Baek J, Choi K, Bae H, Cho B (2011) “Modeling and analysis of DC distribution systems. In: Proceeding of IEEE 8th International conference on power electronics ECCE Asia, 30 May–3 Jun, pp 223–227
Wang Z, Li H (2013) An integrated three-port bidirectional DC–DC converter for PV Application on a DC distribution system. IEEE Trans Power Electron 28(10):4612–4624
Mooney J (2013) Application-specific instruction-set processor for control of multi-rail DC-DC converter systems. IEEE Trans. Circ Syst 60(1):243–254
Williams BW (2008) Basic DC-to-DC converters. IEEE Trans Power Electron 23(1):387–401
Lukic Z, Zhao Z, Prodic A, Goder D (2007) Digital Controller for Multi-Phase DC-DC Converters with Logarithmic Current Sharing. In: IEEE Power electronics specialists conference, pp 119–123
Zhao B, Yu Q, Sun W (2012) Extended-phase-shift control of isolated bidirectional DC–DC converter for power distribution in microgrid. IEEE Trans Power Electron 27(11):4667–4680
Tymerski R, Vorperian V (1986) Generation, classification and analysis of switched-mode DC-to-DC converters by the use of converter cells. In: Proceeding of IEEE telecommunication energy conference, pp 181–195
Tymerski R, Vorperian V (1988) Generation and classification of PWM DC-to-DC converters. IEEE Trans Aerosp Electron Syst 24(6):743–754
Williams B (2014) Unified Synthesis of Tapped-Inductor DC-to-DC Converters. IEEE Trans Power Electron 29(10):5370–5383
Kondrath N, Kazimierczuk M (2011) Loop gain and margins of stability of inner-current loop of peak current-mode-controlled PWM dc-dc converters in continuous conduction mode. In: IET Power Electronics, vol 4, no 6, pp 701–707
Liu YF, Meyer E, Liu X (2009) Recent developments in digital control strategies for DC/DC switching power converters. IEEE Trans Power Electron 24(11):2567–2577
Corradini L, Saggini S, Mattavelli P (2008) Analysis of a high-bandwidth event-based digital controller for DC-DC converters. In: Proceeding of IEEE Power electronics specialists conference, (PESC), pp 4578–4584
Qahouq JAA, Huang L, Huard D, Hallberg A (2007) Novel current sharing schemes for multiphase converters with digital controller implementation. In: IEEE Applied power electronics conference, pp 148–156
Zeng Jianwu (2014) An interconnection and damping assignment passivity-based controller for a DC–DC boost converter with a constant power load. IEEE Trans Ind Appl 50(4):2314–2322
Mooney J, Mahdi AE, Kelly A, Rinne K (2008) DSP-based controller for multi-output/multi-phase high switching frequency DCDC converters. In: IEEE Workshop on control and modeling for power electronics, pp 1–6
Mooney J (2010) DSP-Based control of multi-rail DC-DC converter systems with non-integer switching frequency ratios. In: 2010 1st International conference on energy, power and control (EPC-IQ), pp 203–207
Lukic Z, Rahman N, Prodic A (2007) Multibit sigma-delta pwm digital controller IC for DC-DC converters operating at switching frequencies beyond 10 MHz. IEEE Trans Power Electron 22:1693–1707
El Khateb AH (2015) DC-to-DC Converter with low input current ripple for maximum photovoltaic power extraction. IEEE Trans. Ind Electron. 62(4):2246–2256
Lukic Z, Zhao Z, Prodic A, Goder D (2007) Digital Controller for Multi-Phase DC-DC Converters with Logarithmic Current Sharing. In: IEEE Power electronics specialists conference, pp. 119–123
Williams B (2013) DC-to-DC converters with continuous input and output power. IEEE Trans Power Electron 28(5):2307–2316
Acknowledgment
This work is sponsored by National Students’ Innovation and entrepreneurship training program (201411117001), National Natural Science Foundation of China (grant number 51207135), Jiangsu Natural Science Foundation (grant number BK2012266), and YZU-Yangzhou City Joint Fund (grant number 2012038-10), CSC No. 201409300007.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2016 Springer-Verlag Berlin Heidelberg
About this paper
Cite this paper
Lu, H., Zhu, Y., Hua, Y., Jiang, W., Li, N. (2016). Interconnection Power Converter for Multi-Rail DC Distribution System. In: Jia, Y., Du, J., Li, H., Zhang, W. (eds) Proceedings of the 2015 Chinese Intelligent Systems Conference. Lecture Notes in Electrical Engineering. Springer, Berlin, Heidelberg. https://doi.org/10.1007/978-3-662-48386-2_32
Download citation
DOI: https://doi.org/10.1007/978-3-662-48386-2_32
Published:
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-662-48384-8
Online ISBN: 978-3-662-48386-2
eBook Packages: EngineeringEngineering (R0)