Abstract
The most frequently used methods for production of amorphous metallic alloys via rapid solidification from the melt, chill block melt spinning, and planar flow casting are presented and discussed. The influence of technological production parameters are taken under consideration. The dependence of the geometrical dimensions of ribbonlike glassy metals upon the melt ejection pressure and peripheral velocity of the quenching substrate (disk) is theoretically subjected to analysis and experimental proof. The authors’ experience upon the production of bulk amorphous alloys is presented and discussed. A brief description about other methods for production of amorphous metallic materials is presented. An overview about the bibliography in the form of more than 90 cited references is proposed.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Davies HA (1983) In: Luborsky FE (ed) Amorphous metallic alloys. Butterworths, London, p 13
Hafner J (1981) In: Guentherodt H-J, Beck H (eds) Metallic glasses. Springer Verlag, Berlin, p 93
Giessen BS, Whang SH (1980) J Phys C8:95
Sommer F (1981) Zs Metallkde 72:219
Pond R, Maddin P (1969) Trans Met Soc AIME 245:2475
Chen HS, Miller CE (1970) Rev Sci Instrum 41:237
Anestiev L (1991) Mater Sci Eng A131:115
Huang SC, Fiedler HC (1981) Mater Sci Eng 51:39
Takayama S, Oi T (1979) J Appl Phys 5C(7):4962
Giessen B et al (1972) In: Beer SZ (ed) Physics and chemistry of liquid metals. Marcel Dekker, New York, p 633
Jones H (1973) Rep Prog Phys 36:1425
Jones H et al (1973) J Mat Sci 8:705
Davies HA (1978) In: Cantor B (ed) Proceedings of the conference on rapidly quenched metals RQ3, vol 1. The Metals Society, London, p 1
Liebermann HH (1979) Trans Mag MAG 15:1393
Duvez P et al (1960) J Appl Phys 31:1136
Miroshnichenko IS (1982) Quenching from the melt. Metallurgy, Moscow, p 168, in Russian
Esslinger P et al (1965) Zs Wirtschaft Fertigung 60:1156
Chen HS et al (1970) Rev Sci Instrum 41:1237
Pond RB (1958) Metallic filaments and method of making same. US Patent 2,825,108, 4 Mar 1958
Polk DE et al (1974) J Non-Cryst Solids 15:165
Bedell JR, Wellslager JA (1975) Elevation of melt in the melt extraction production of metal filaments. US Patent 3,863,700, 4 Feb 1975
Bedell JR (1975) Extended retention of melt spun ribbon on quenching wheel. US Patent 3,862,658,A, 28 Jan 1975
Bedell JR, Rothmayer NY et al (1978) Chill roll casting of continuous filament. US Patent 4,077,462, 7 Mar 1978
Kavesh S (1974) Liquid quenching of free jet spun metal filaments. US Patent 3,845,805, 5 Nov 1974
Kavesh S (1978) In: Gilman JJ, Leamy HJ (eds) Metallic glasses. ASM, Metals Park, p 36
Narasimhan MC (1979) Continuous casting method for metallic strips. US Patent 4,142,571, 6 Mar 1979
Mobley CE, Maringer RE (1975) An improved method of formation of filament directly from molten material. US Patent 3,861,450, 21 Jan 1975
Beddow JK (1980) The production of metal powder by atomization. Heyden and Sons LTD, London
Grant NJ (1985) In: Steeb S, Warlimont H (eds) Proceedings of the conference on rapidly quenched metals RQ5, vol 1. North Holland, Amsterdam, p 3
Lawley A (1977) Int J Powder Met Powder Tech 13:169
Lubanska H (1970) J Metals 22:45
Klar E et al (1072) In: Burke JJ, Weiss V (eds) Powder metallurgy for high-performance applications. Syracuse University Press, Syracuse, p 57
Mehrotra SP et al (1980) Trans Indian Inst Metals 33:361
Lawley A (1981) J Metals 33:13
Dain RJ (1980) Atomizer for making powder. US Patent 4,191,516, 4 Mar 1980
Yamaguchi T (1981) Amorphous electronic materials and their application. Science Forum Press, Tokyo, p 78
Miller S et al (1979) Scr Metall 13:673
Anand V et al (1980) In: Reston R, Mehrabian R, Kear B, Cohen M (eds) Proceedings of the 2nd conference on rapid solidification processing: principles and technologies, Baton Rouge LA, Claitor’s Publ Division, p 273
Thompson CC (1981) Gas manifold for particle quenching. US Patent 4,284,394, 18 Aug 1981
Yamaguchi T (1978) Appl Phys Letters 33:498
Singer A et al (1980) Powder Metall 2:81
Singer ARE et al (1977) In: Hausner HH, Taubenblat PV (eds) Modern developments in powder metallurgy. Metal Powder Industries Federation, Princeton, p 127
Ishii H (1982) In: Masumoto T, Suzuki K (eds) Proceedings of the conference on rapidly quenched metals RQ4, vol 1. Japan Institute of Metals, p 238
Anestiev L, Russev KA (1987) On the fluid dynamics of formation of thin metal ribbons by rapid quenching from the melt. Mater Sci Eng 95:281
Strange EH, Pim CA (1908) Process of manufacturing thin sheets, foil, strips, or ribbons of zinc, lead, or other metal or alloy. US Patent 905,758, 1 Dec 1908
Pond RB (1959) Method of forming round metal filaments. US Patent 2,879,566 A, 31 Mar 1959
Kavesh S (1978) In: Gilman JJ, Leamy HJ (eds) Proceedings of the symposium on metallic glasses, Niagara Falls, ASM, Metals Park, p 36
Russew K, Stojanova L, Lovas A (1994) Effect of processing conditions on the ribbon geometry and viscous flow behavior of Fe40Ni40Si6B14 amorphous alloy. Int J Rapid Solidification 8:147
Anderson PM III, Lord AE Jr (1980) Mat Sci Eng 43:267
Chhabra RP, Sheth DK (1990) Z Metallkde 81:264
Anestiev L, Russew K (1988) On the dependence between the casting conditions and ribbon dimensions by PFC method. In: Proceedings of the first international conference on rapidly quenched metals, Varna, 1987, Akademie der Wissenschaften der DDR, VEB Kongress- und Werbedruck, Oberlungwitz, p 63
Takayama S, Oi T (1979) J Appl Phys 50:4962
Antony T, Cline H (1978) J Appl Phys 49:829
Aleshko PI (1977) Mechanics of fluid and gas. High School Publ. House, Kharkov, p 320 (In Russian)
Kopasz C et al (1983) In: Proceedings of the EPS conference soft magnetic materials 6, vol 7E. Eger, Hungary, p 101
Greer AL (1993) Nature 366:303
Greer AL (1995) Science 267:1947
Inoue A et al (1990) Mater Trans Jpn Inst Met 31:425
Inoue A et al (1993) Mater Trans Jpn Inst Met 34:351
He Y et al (1994) Philos Mag Lett 70:371
Inoue A et al (1991) Mater Trans Jpn Inst Met 32:609
Inoue A et al (1992) Mater Trans Jpn Inst Met 33:937
Zhang T et al (1991) Mater Trans Jpn Inst Met 32:1005
Inoue A, Shinohara Y, Gook JS (1995) Mater Trans JIM 36:1180
Kim YJ et al (1994) Appl Phys Lett 65:2136
He Y et al (1996) J Non-Cryst Solids 205–207:602
Kim YH, Inoue A, Masumoto T (1990) Met Trans JIM 31:747
Chen H, He Y, Shifet GJ, Poon RJ (1991) Scr Met 25:1421
Inoue A, Zhang T, Itoi T, Takeuchi A (1997) Mater Trans JIM 38:359
Inoue A (1998) Bulk amorphous alloys, preparation and fundamental characteristics, materials science foundations, vol 4. Trans. Tech. Publications, LTD, Zurich, p 194
Yoshizawa Y, Oguma S, Yamauchi K (1988) J Appl Phys 64:6044
Suzuki K, Kataoka N, Inoue A, Makino A, Masumoto T (1990) Mater Trans JIM 31:743
Croat JJ, Herbst JF, Lee RW, Pinkerton FE (1984) J Appl Phys 55:2078
Hirosawa S, Matsuura Y, Yamamoto H, Fujimura S et al (1986) J Appl Phys 69:873
Taranichev VE, Alenov MN, Nemova OY (1994) J Magn Magn Mater 131(3):229
Kubota T, Inoue A (2004) Mater Trans JIM 45:199
Deng JF, Zhang XP, Min EZ (1988) Appl Catal A 37:339
Baiker A, Maciejewski M, Tagliaferri S (1993) Berichte der Bunsengesellschaft für physikalische Chemie 97(3):286
Wang WJ, Qiao MH, Yang J, Song HX, Deng JF (1997) Appl Catal A 163:101
Chen H (1974) Acta Met 22:1505
Inoue A (1995) Mater Trans JIM 36(7):866
Inoue A, Nishiyama N (1997) Mater Sci Eng A226–228:401
Kui HW, Greer AL, Turnbull D (1984) Appl Phys Lett 45:615
Inoue A, Ohtera K, Kita K, Masumoto T (1998) Jap J Appl Phys 27:L2248
Inoue A, Kohinata NM, Tsai AP, Masumoto T (1989) Mater Trans JIM 30:378
Inoue A, Zhang T (1989) Mater Trans JIM 30:965
Inoue A, Yamaguchi H, Zhang T (1990) Mater Trans JIM 31:10
Inoue A, Zhang T, Masumoto T (1990) Mater Trans JIM 31:177
Inoue A, Zhang T, Masumoto T (1993) J Non-Cryst Solids 156–158:473
Inoue A, Nishiyama N, Amiya K, Zhang T, Masumoto T (1994) Mater Lett 19:131
Inoue A, Shibata T, Zhang T (1995) Mater Trans JIM 36:1420
Peker AL, Johnson WL (1993) Apl Phys Lett 63:2342
Inoue A, Zhang T, Zhang W, Takeuchi A (1996) Mater Trans JIM 37:99
Inoue A, Nishiyama N, Matsuda T (1996) Mater Trans JIM 37:181
Inoue A, Gook JS (1995) Mater Trans JIM 36:1180
Inoue A, Shinuhara Y, Gook JS (1995) Mater Trans JIM 36:1427
Inoue A, Zhang T, Takeuchi A (1996) Mater Trans JIM 37:1731
Inoue A, Koshiba M, Zhang T, Makino A (1997) Mater Trans JIM 38:577
Inoue A, Zhang T, Takeuchi A (1997) Appl Phys Lett 71:464
Russew K, Stojanova L, Sommer F (2000) Preparation of bulk and ribbon-like amorphous metallic alloys and study of their structure and rheological properties. Part I: preparation and structural study. J Mater Sci Technol 8(1):25
Russew K, Stojanova L, Sommer F (2000) Preparation of bulk and ribbon-like amorphous metallic alloys and study of their structure and rheological properties. Part II: study of rheological properties. J Mater Sci Technol 8(1):34
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
Copyright information
© 2016 Springer-Verlag Berlin Heidelberg
About this chapter
Cite this chapter
Russew, K., Stojanova, L. (2016). Most Important Methods for Production of Amorphous Metallic Alloys. In: Glassy Metals. Springer, Berlin, Heidelberg. https://doi.org/10.1007/978-3-662-47882-0_2
Download citation
DOI: https://doi.org/10.1007/978-3-662-47882-0_2
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-662-47881-3
Online ISBN: 978-3-662-47882-0
eBook Packages: Chemistry and Materials ScienceChemistry and Material Science (R0)