Abstract
In hard anodizing process which requires an aluminum part soaked in the electrolysis solution in order to form anodic (aluminum oxide) film on the aluminum part so that it will be harder and durable for work. Although, this part will be drained afterwards by ionize water to eliminate impurities from it, aluminum sulfate stain may be traceable from the part. It is especially for cookware products that require clear coating on an anodized part for aesthetic purpose. It can be imagined that the trace mark from aluminum sulfate can scrap this part or it has to be reworked. However, in coating process, there are three coating steps named prime, middle, top that may aid to conceal the mark as long as the required coating thickness is within specification. However, only middle level is concerned in this work. Therefore, the objective of this paper is two folds. One is to investigate the relationship of spray coating parameters to dry film thickness (DFT) and the other is to determine DFT which is able to conceal the abovementioned trace on the hard anodizing part.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
Samon, H.: Preparation and Evaluation of Hard Anodized Coating on Aluminium, King mongkuts Univesity of Technology Thonburi, Thailand (1994)
Parinya, S.: Aluminum Color-Coating Machine by Anodize Methodology. Rajamangala University of Thechnology Krungthep, Thailand (2010)
Trompette, J.L., Arurault, L., Fontorbes, S., Massot, L.: Influence of the Anion Specificity on the the Electrochemical Corrosion of Anodized Aluminum Substrates. Electrochimica Acta 55, 2901–2910 (2010)
Chung, C.K., Liao, M.W., Chang, H.C., Lee, C.T.: Effects of Temperature and Voltage Mode on Nanoporous Anodizc Aluminum Oxide Files by on-Step Anodization. Thin Solid Films 520, 1554–1558 (2011)
Han, X.Y., Shen, W.Z.: Mproved Two-Step Anodization Technique for Ordered Porous Anodic Aluminum Membranes. Journal of Electroanalytical Chemistry 655, 56–64 (2011)
Luangkularb, S., Prombanpong, S.: Material Consumption and Dry Film Thickness in Spray Coating Process. In: Proceedings of the 47th CIRP Conference on Manufacturing Systems, vol. 17, pp. 789–794 (2014)
From, P., Gunnar, J., Gravdahl, J.: Optimal paint gun orientation in spray paint applications-experimental results. Proc. IEEE Transaction on Automation Science and Engineering 8, 438–442 (2011)
Kout, A., Muller, H.: Parameter optimization for spray coating. Proc. of the Advances in Engineering Software 40(10), 1078–1086 (2009)
Sheng, W., Chen, H., Xi, N., Chen, Y.: Tool path planning for compound surfaces in spray forming processes. Proc. IEEE Transaction on Automation Science and Engineering 2, 240–249 (2005)
Youdong, C., Xiaodong, L.U., Hongxing, W.: Trajectory planning based on latitude for painting on spherical surface. In: Proc. IEEE Industrial informatics (INDIN), pp. 431–435 (2012)
Somgumnerd, J., Tangwarodomnukun, V., Prombanpong, S.: Effects of Flap Wheel Grinding Parameters on Surface Roughness for Stainless Steel. The Applied Mechanics and Materials, 548–549, 506-509 (2014)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2015 Springer-Verlag Berlin Heidelberg
About this paper
Cite this paper
Srisoy, C., Prombanpong, S. (2015). Concealing of Al2(SO4)3 Stain by Spray Coating Process. In: Gen, M., Kim, K., Huang, X., Hiroshi, Y. (eds) Industrial Engineering, Management Science and Applications 2015. Lecture Notes in Electrical Engineering, vol 349. Springer, Berlin, Heidelberg. https://doi.org/10.1007/978-3-662-47200-2_85
Download citation
DOI: https://doi.org/10.1007/978-3-662-47200-2_85
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-662-47199-9
Online ISBN: 978-3-662-47200-2
eBook Packages: Computer ScienceComputer Science (R0)