Advertisement

Introduction

  • Boris F. ShorrEmail author
Chapter
Part of the Foundations of Engineering Mechanics book series (FOUNDATIONS)

Abstract

Analysis of high-temperature behavior of engineering structures, or in a wider scope, solids (deformable bodies), is a multidisciplinary problem. It is of particular importance for numerous industrial applications but is also of great academic interest as a branch of continuum mechanics.

Keywords

Principal Stress Strain Tensor Tangential Stress Solid Mechanic Machine Part 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

References

  1. Andrade EDC (1910) On the viscous flow of metals and allied phenomena. Proc R Soc Ser A 84:A567Google Scholar
  2. Bailey RW (1935) The utilization of creep test data in engineering design. Proc Inst Mech Eng 131(1):131–349Google Scholar
  3. Balashov BF, Kozlov LA (1981) Methods of fatigue tests and results processing. In: Birger IA, Balashov BF (eds) Constructive strength of materials and details of gas-turbine engines. Mashinostroenie, Moscow (in Russian)Google Scholar
  4. Birger IA (1957) Calculation of nonuniformly heated rods with variable elastic parameters. Trudy Instituta im. Baranova, No. 298, Oborongiz, Moscow (in Russian)Google Scholar
  5. Birger IA, Dem’yanushko IV (1968) Theory of plasticity at nonisothermal loading. Ingenerny J Mechanika Tverdova Tela 6:70–77 (in Russian)Google Scholar
  6. Boley BA, Weiner JH (1960) Theory of thermal stresses. Wiley, New YorkzbMATHGoogle Scholar
  7. Duhamel JMC (1837) Deuxième memoire sur les phénomènes thermo-mécaniques. J de l’Ecole Polytechnique 15(25):1–57Google Scholar
  8. Dul’nev RA (1979) Experimental methods of research of thermo-fatigue characteristics. In: Constructive strength of materials and details of gaseous-turbine engines. CIAM, Proc. No. 835, Moscow, pp 497–516 (in Russian)Google Scholar
  9. Gatewood BE (1957) Thermal stresses with applications to airplanes, missiles, turbines and nuclear reactors. McGraw-Hill Book Company Inc., New YorkGoogle Scholar
  10. Il’ushin AA (1943) Some problems of the theory of plastic deformations. J Prikladnaya matematika i mekhanika YII(4):245–272 (in Russian)Google Scholar
  11. Il’ushin AA (1963) Plasticity. Foundation of general mathematical theory. AN SSSR, Moscow (in Russian)Google Scholar
  12. Kachanov LM (1958) About failure time in creep conditions. Izv.AN SSSR, ONT, No. 8 (in Russian)Google Scholar
  13. Lebedev NN (1934) Thermal stresses in the theory of elasticity, PMM, vol 2(1). Moscow (in Russian)Google Scholar
  14. Lebedev NN (1937) Thermal stresses in the theory of elasticity, ONTI. Leningrad-Moskva (in Russian)Google Scholar
  15. Lemaitre J, Chaboche JL (1990) Mechanics of solid materials. Cambridge University Press, CambridgeCrossRefzbMATHGoogle Scholar
  16. Lemaitre J, Chaboche JL (2004) Mecanique des materiaux solides, 2nd edn. Dunod, ParisGoogle Scholar
  17. Malinin NN (1975) Applied theory of plasticity and creep, 2nd edn. Mashinostroenie, Moscow (in Russian)Google Scholar
  18. Manson SS (1966) Thermal stress and low-cycle fatigue. McGraw-Hill Company, New YorkGoogle Scholar
  19. Melan E, Parkus H (1953) Wärmespannungen Infolge Stationäre Temperatur-felder. Springer, WienGoogle Scholar
  20. Murakami S (2012) Continuum damage mechanics. Springer, BerlinGoogle Scholar
  21. Noll W (1958) A mathematical theory of the mechanical behavior of continuous media. Arch Rat Mech Anal 2:197–226CrossRefzbMATHGoogle Scholar
  22. Pisarenko GS, Novikov NV, Andreev LP et al (1969) About problem of investigation of metal mechanical characteristics at low temperatures under vacuum conditions. In: Thermostrength of materials and construction members, vol 5. Naukova Dumka, Kiev, pp 440–448 (in Russian)Google Scholar
  23. Prager W (1937) Mechanique des solides isotropes au dela du domaine elastique. Memorial de Sciences Math, vol LXXXVIIGoogle Scholar
  24. Rabotnov YN (1966) Creep of construction elements. Physmatgiz, Moscow. Trans: (1969) Creep problems in structure members. North Holland, Amsterdam (in Russian)Google Scholar
  25. Sedov LI (1973) Mechanics of continuum medium, vol 1, 2, 2nd edn. Nauka, Moscow (in Russian)Google Scholar
  26. Serensen SV, Kogaev VP, Shneyderovich RM (1963) Load-capacity and strength calculation of machine structures, 1st edn (3rd edn, 1975). Mashinostroenie, Moscow (in Russian)Google Scholar
  27. Shorr BF (1958) Effect of nonuniform heating under creep conditions on the change in a stress state. Dokl Akad Nauk SSSR 123(5):809–812 (in Russian)Google Scholar
  28. Temis YM (1994) Applied solution methods of thermal plasticity problems. In: Frolov KV et al (eds) “Machinery, Encyclopedia”. In: Kolesnikov KS et al (eds) Dynamics and machine strength, vol 1–3(B.1). Mashinostroenie, Moscow, pp 231–236 (in Russian)Google Scholar
  29. Timoshenko SP, Goodier JN (1970) Theory of elasticity, 3rd edn. McGraw-Hill, New YorkzbMATHGoogle Scholar
  30. Touloukian YS et al (eds) (1975) Thermophysical properties of matter, vol 12. Thermal expansion. Plenum, NY, WashingtonGoogle Scholar
  31. Troshchenko VT, Lebedev AA, Strijalo VA, Stepanov GV, Krivenjuk VV (2000) Mechanical behavior of materials at different load terms. Logos, Kiev (in Russian)Google Scholar
  32. Valanis KC (1971) A theory of viscoplasticity without a yield surface. Arch Mech Stosow 23(4):517–551zbMATHMathSciNetGoogle Scholar
  33. Volkov IA, Korotkikh YG (2008) State equations of viscoelasticplastic media with damages. Phyzmatgiz, Moscow (in Russian)Google Scholar
  34. Wilshire B, Evans RW (1994) Acquisition and analysis of creep data. J Strain Anal Eng Des 29(3):159–165Google Scholar
  35. Zhou X (2008) Publications on thermal stresses. J Therm Stresses, 31:663–664 (Taylor & Francis)Google Scholar
  36. Zienkiewicz OC, Taylor RL (2000) The finite element method, 5th edn. Butterworth-Heinemann, OxfordGoogle Scholar
  37. Zubchaninov VG, Okhlopkov NL, Garanikov VV (2004) Experimental plasticity, B.2, Processes of combine loading. Tver’s State Technical University, Tver (in Russian)Google Scholar

Copyright information

© Springer-Verlag Berlin Heidelberg 2015

Authors and Affiliations

  1. 1.Central Institute of Aviation Motors (CIAM)MoskvaRussia

Personalised recommendations