Abstract
The architectural design of a building consists of four main components: structure, shell, building services, and grace. The performance of a building is essentially determined by the chosen technical, constructive and last but not least aesthetic solution in the interaction of these components. One has to differentiate between constant, difficult to change and easy to change structural components. In many cases, the phase of the basic evaluation, with the detailed discussion of all major building requirements, is underestimated. A high adaptability and high sustainability ensures a construction project with a large reuse potential in second and third use. The chapter explore these aspects in detail.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Notes
- 1.
This section was made kindly available to the authors by Gerhard Hoffmann, Managing Shareholder of ifes GmbH Cologne. We would like to express our sincere gratitude to him.
Bibliography
Adam, J., Hausmann, K., Jüttner, F.: Entwurfsatlas Industriebau (Design Manual Industrial Construction), 1st edn. Birkhäuser, Basel (2004)
Ackermann, K.: Tragwerke in der konstruktiven Architektur (Structures in constructive architecture). DVA, Stuttgart (1988)
ASUE Arbeitsgemeinschaft für sparsamen und umweltfreundlichen Energieverbrauch. Die Erdgas-Strahlenheizung (Work group for saving and environmental friendly energy consumption. The natural gas radiator). http://asue.de Kaiserslautern (2013)
Bach, H. et al.: Gezielte Belüftung von Arbeitsbereichen in Fabrikhallen (Targeted ventilation of work areas in factories). Forschungsbericht HLK 1-92. Stuttgart (1992)
British Standard Institution: BS 6399 Loadings for Buildings. Part 1: Code of practice for dead and imposed loads, 1996. Part 2: Code of practice for wind loads, 1997. Part 3: Code of practice for imposed roof loads, 1988
Böhme, G.: Architektur und Atmosphäre (Architecture and Atmosphere). 1. Aufl. Verl. Fink (Wilhelm), Paderborn (2006)
Daniels, K.: Haustechnik, ein Leitfaden für Architekten und Ingenieure (Building Services, a Guide for Architects and Engineers). Oldenbourg, München (1996)
DIN 276: Kosten im Hochbau (Building Costst). Beuth, Berlin (2008)
DIN EN 12664: Licht und Beleuchtung von Arbeitsstätten (Light and lighting - Lighting of workplaces). Beuth, Berlin (2011)
DIN EN 12792:2004-01: Lüftung von Gebäuden - Symbole, Terminologie und graphische Symbole. (Ventilation for buildings - Symbols, terminology and graphical symbols). Beuth, Berlin (2004)
Engel, H.: Tragsysteme (Structure Systems), 3rd edn. Hatje Cantz, Ostfildern (2007)
British Standards Institution: DD ENV 1993-1-1: 1992 Eurocode 3. Design of Steel Structures. General Rules and Rules for Buildings (1992)
British Standards Institution: DD ENV 1994-1-1: 1994 Eurocode 4. Design of Composite Steel and Concrete Structures. General Rules and Rules for Buildings (1994)
British Standards Institution: DD ENV 1998-1-4: 1996 Eurocode 8. Design Provisions for Earthquake Resistance of Structures. General Rules. Strengthening and Repair of Buildings (1996)
ASTM International: Building Constructions E72 to E1670-I—Annual Book of ASTM Standards, Section 4: Construction, vol. 04 (2008)
Grimm, F.: Hallen aus Stahl (Halls from Steel). Stahlinformationszentrum, Düsseldorf (1997)
Hatz, R.: Auf Sparflamme. Energetische Optimierung von Industriebauten (On Low Flame. Energy Optimization of Industrial Buildings). In: db 8/2006, pp. 71–75
Hausladen, G., de Saldanha, M., Liedl, P.: ClimaSkin- Konzepte für Gebäudehüllen, die mit weniger Energie mehr leisten (ClimaSkin - Concepts for building Shells that do more with less Energy), 1st edn. Callwey, München (2007)
Hildebrand, G.: Designing for Industry. The Architecture of Albert Kahn. The Massachusetts Institute of Technology (1974)
Herzog, T., Krippner, R., Lang, W.: Fassaden Atlas (Facades Atlas). Birkhäuser, Basel (2004)
HOAI Honorarordnung für Architekten und Ingenieure (Fees for Architects and Engineers) Federal Law June (2013)
International Electrotechnical Commission: IEC 60364-5, 51, 52, 53, 54, Electrical Installations of Buildings Edition 3.0 (2011)
DIN EN ISO 13790: Energieeffizienz von Gebäuden - Berechnung des Energiebedarfs für Heizung und Kühlung (Energy performance of buildings - Calculation of energy use for space heating and cooling)
Knittel-Ammerschuber, S.: Erfolgsfaktor Architektur – Strategisches Bauen für Unternehmen (Success Factor Architecture - Strategic Building for Companies). Birkhäuser, Basel (2006)
Kolarik, F. et al.: Energieeffiziente Lüftungsanlagen in Betrieben (Energy efficient ventilation systems in enterprises). Landesgewerbeamt Baden-Württemberg, Informationszentrum Energie. Stuttgart (2002)
Krauss, F., Führer, W., Jürges, T.: Tabellen zur Tragwerklehre (Tables for Structural Design). Rudolf Müller, Köln (2007)
Krimmling, J., Preuß, A., Deutschmann, U.: Atlas Gebäudetechnik – Grundlagen, Konstruktionen, Details (Atlas Building Services - Fundamentals, Designs, Details). Rudolf Müller, Köln (2008)
Lachenmann, G.: Industrialisiertes Bauen (Industrialized Building). In: Ackermann, K. (ed.) Industriebau, Ausstellungskatalog, S. 118–141
Messedat, J.: Corporate Architecture – Entwicklung, Konzepte, Strategien (Corporate Architecture - Development, Concepts, Strategies). Av edition, Ludwigsburg (2005)
Pistohl, W.: Handbuch der Gebäudetechnik (Handbook Building Services), 6th edn. Neuwied, Dessau-Roßlau (2007)
Polónyi, S., Walochnik, W.: Architektur und Tragwerk (Architecture and Support Structure). Ernst & Sohn, Berlin (2003)
Pottgiesser, U., König, K.: Baukonstruktion Ausbau (Interior Building Construction). UTB, Stuttgart (2007)
Recknagel, et al.: Taschenbuch für Heizung + Klimatechnik (Handbook for Heating + Air-Conditioning, 76th edn) Oldenbourgh, München (2013)
Reichardt, J.: Ästhetik Effizienz (Aesthetics Efficiency). In: Nelte, H.M. (ed.) Ästhetik Effizienz - Industrie Gewerbe Verwaltungsbauten (Aesthetics Efficiency – Industrial, Commercial Administrative Buildings), 1st edn. Nelte, Wiesbaden (2005)
Reichardt, J.: Industrie- und Gewerbebau in Holz (Industrial and Commercial Buildings in Wood). Holzbau Handbuch, row 1, part 3, vol. 11 Bonn (2008)
Schnittich, C.: Im Detail Gebäudehüllen (Building Shells), 2nd edn. Birkhäuser, Basel (2006)
Tompkins, J.A.: Facilities Planning, 4th edn. Wiley, Hoboken (2010)
van Uffelen, C.: Factory Design. Braun, Berlin (2009)
VDI-Richtline 3802:Raumlufttechnische Anlagen für Fertigungsstätten. Absaugung luftfremder Stoffe an materialabtragenden Werkzeugmaschinen (VDI Guide line 3802: Air conditioning systems for factories – Capture of air pollutants at machine tools removing material) Beuth, Berlin (2010)
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
Copyright information
© 2015 Springer-Verlag Berlin Heidelberg
About this chapter
Cite this chapter
Wiendahl, HP., Reichardt, J., Nyhuis, P. (2015). Building Design. In: Handbook Factory Planning and Design. Springer, Berlin, Heidelberg. https://doi.org/10.1007/978-3-662-46391-8_11
Download citation
DOI: https://doi.org/10.1007/978-3-662-46391-8_11
Published:
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-662-46390-1
Online ISBN: 978-3-662-46391-8
eBook Packages: EngineeringEngineering (R0)