Abstract
Pre-impregnated semi-finished textile products (prepregs), are an important base material for the manufacture of thermoset and thermoplastic composite materials. They consist of a usually flat and planar textile reinforcement structure and are combined with thermoset or thermoplastic matrices required for the production of the final component. Both short fibers or continuous filaments and textile fabrics, such as woven fabrics or multiaxial warp-knitted fabrics, can be used as base material. The basic principle of using this special textile semi-finished product is to separate the step of impregnating the reinforcement structure with the matrix during composite material production from the final step of producing the component form.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
FLEMMING, M.; ZIEGMANN, G.; ROTH, S.: Faserverbundbauweisen - Fertigungsverfahren mit duroplastischer Matrix. Berlin, Heidelberg : Springer Verlag, 1999
PARTINGTON, N.: Prepregs for race boats: Adapting aerospace materials to the marine world. In: JEC Composites Magazine (2009), No. 51, pp. 30–33
NEITZEL, M.; MITSCHANG, P.: Handbuch Verbundwerkstoffe. München,Wien : Carl Hanser Verlag, 2004
BÜLTJER, U.: Produktion von GFK und duroplastischen Formmassen in Europa. In: Proceedings.7. Internationale AVK-TV Tagung. Baden-Baden, Germany, 2004
EHRENSTEIN, G.: Faserverbund-Kunststoffe. München, Wien : Carl Hanser Verlag, 2006
KANNEBLEY, G. et al.: AVK-TV-Handbuch. Frankfurt, 2004
LIEBOLD, R.: Harzmatten in engen Toleranzen herstellen. In: Kunststoffe 81 (1991), No. 10, pp. 923–928
REUTHER, E.: Kohlefaser SMC für Strukturbauteile. In: Proceedings. 7. Internationale AVKTV Tagung. Baden-Baden, Germany, 2004
DAVIS, B. A. et al.: Compression Moulding. München, Wien : Carl Hanser Verlag, 2003
HELLRICH, W.; HARSCH, G.; HAENLE, S.: Werkstoff-Führer Kunststoffe - Eigenschaften, Prüfungen, Kennwerte. München, Wien : Carl Hanser Verlag, 2004
ANONYM: Prepreg Technology, Publication No. FGU 017b (Company document Hexcel Corporation). 2005
FORD, R.; GRIFFITHS, B.: Formable aligned-fibre composite materials. In: JEC Composites Magazine (2009), No. 50, pp. 52–54
PARTRIDGE, I. K.; CARTÍE, D. D. R.: Delamination resistant laminates by Z-Fiber® pinning: Part I manufacture and fracture performance. In: Composites: Part A 36 (2005), No. 1, pp. 55–64. DOI 10.1016/j.compositesa.2004.06.029
MOURITZ, A. P.: Review of z-pinned composite laminates. In: Composites: Part A 38 (2007), No. 12, pp. 2383–2397. DOI 10.1016/j.compositesa.2007.08.016
BYUN, J.-H.; SONG, S.-W.; LEE, C.-H.; UM, M.-K.; HWANG, B.-S.: Impact properties of laminated composites stitched with z-fibers. In: Proceedings. 15th International Conference on Composite Materials. Durban, South Africa, 2005
GRASSI, M.; ZHANG, X.; MEO, M.: Prediction of stiffness and stresses in z-fibre reinforced composite laminates. In: Composites: Part A 33A (2002), No. 12, pp. 1644–1653. DOI 10.1016/S1359–835X(02)00137–9
MILNER, S.: Innovative prepreg systems for the marine industry. In: JEC Composites Magazine (2007), No. 35, pp. 37–39
ERNST, H.; HENNING, F.; GEIGER, O.: Neueste LFT-D Direkttechnologie für hochbelastbare Bauteile und Komponenten mit hoher Oberflächengüte. In: Proceedings. 10. Dresdner Leichtbausymposium. Dresden, Germany, 2006, pp. 1–62
GEIGER, O.: Hinterformen von Folien mit langfaserverstärkten Thermoplasten. In: Proceedings. 7. Internationale AVK-TV Tagung. Baden-Baden, Germany, 2004
PAUL, Ch.; CHERIF, Ch.; HANUSCH, J.: Dreikomponenten-Hybridgarn und –Hybridgarngestricke für komplexe Leichtbauanwendungen. In: Proceedings. 8. Dresdner Textiltagung. Dresden, Germany, 2006
CHOI, B. D.: Entwicklung von Commingling-Hybridgarnen für faserverstärkte thermoplastische Verbundwerkstoffe. Dresden, Technische Universität Dresden, Fakultät Maschinenwesen, Dissertation, 2005
KALDENHOFF, R.: Friktionsspinn-Hybridgarne als neuartige textile Halbzeuge zur Herstellung von Faserverbundkunststoffen. Aachen, RWTH Aachen, Fakultät für Maschinenwesen, Dissertation, 1996
PAPPADÀ, S.; RAMETTA, R.; SUPPRESSA, G.; PASSARO, A.; MAFFEZZOLI, A.: PPScarbon reinforced panals with improved damage tolerance. In: Proceedings. 32nd International SAMPE Conference - New Material Characteristics to cover New Application Needs. Paris, France, 2011
ORAWATTANASRIKUL, S.: Experimentelle Analyse der Scherdeformation biaxial verstärkter Mehrlagengestricke. Dresden, Technische Universität Dresden, Fakultät Maschinenwesen, Dissertation, 2006
HÖRSTING, K.: Rationalisierung der Fertigung langfaserverstärkter Verbundwerkstoffe durch den Einsatz multiaxialer Gelege. Aachen, RWTH Aachen, Fakultät für Maschinenwesen, Dissertation, 1994
FLEMMING, M.; ZIEGMANN, G.; ROTH, S.: Faserverbundbauweise - Halbzeuge und Bauweisen. Berlin, Heidelberg : Springer Verlag, 1996
HENNINGER, F. H.: Beitrag zur Entwicklung neuartiger Fertigungsverfahren zur Herstellung von kontinuierlich faserverstärkten Thermoplasten. Kaiserslautern, Technische Universität Kaiserslautern, Fachbereich Maschinenbau und Verfahrenstechnik, Dissertation, 2005
HOFFMANN, L.; RENN, M.; DRUMMER, D.; MÜLLER, T.: FIT-Hybrid - Hochbelastbare Faserverbundbauteile großserientauglich hergestellt. In: Leightweightdesign (2011), No. 2, pp.38–43
RAMANI, K.; HOYLE, C. H.: Processing of thermoplastic composites using a powder slurry technique, I. Impregnation and preheating. In: Materials and Manufacturing Processes 10 (1995), No. 6, pp. 1169–1182. DOI 10.1080/10426919508935100
SALA, G.: Heated chamber winding of thermoplastic powder-impregnated composites, Part 1, Technology and basic thermomechanical aspects. In: Composites. Part A 27 (1996), No. 5, pp. 387–392. DOI 10.1016/1359–835X(95)00036–2
OSTGATHE, M.; MAYER, Ch.; NEITZEL, M.: Organobleche aus Thermoplastpulver. In: Kunststoffe 86 (1996), No. 12, pp. 1838–1840
MÄDER, E.; ROTHE, C.: Maßschneidern von Hybridgarnen für effektive Verbundeigenschaften. In: Proceedings. 8. Dresdner Textiltagung. Dresden, Germany, 2006
CHERIF, Ch.; RÖDEL, H.; HOFFMANNN, G.; DIESTEL, O.; HERZBERG, C.; PAUL, Ch.; SCHULZ, Ch.; GROSSMANN, K.; MÜHL, A.; MÄDER, E.; BRÜNIG, H.: Textile Verarbeitungstechnologien für hybridgarnbasierte komplexe Preformstrukturen /Textile manufacturing technologies for hybrid based complex preform structures. In: Journal of Plastics Technology (2009), No. 2, pp. 103–129
ADAM, F.; HUFENBACH, W.; GROSSMANN, K.; MODLER, K.-H.; HANKE, U.; LIN, S.; MODLER, N.; KRAHL, M.: Processing of Novel 3D Hybrid Yarn Textile Thermoplastic Composites Using Process-adapted Consolidation Kinematics. In: Proceedings. 8. Dresdner Textiltagung. Dresden, Germany, 2006
HUFENBACH, W. A.; MODLER, N.; KRAHL, M.; HORNIG, A.; FERKEL, H.; KURZ, H.; EHLEBEN, M.: Leichtbausitzschalen im Serientakt. Integrales Bauweisenkonzept. In: Kunststoffe 100 (2010), pp. 56–59
Additional Literature
ADVANI, S. G.; HSIAO, K.T. (Editors): Manufacturing techniques for polymer matrix composites (PMCs). Woodhead publishing, 2012, ISBN 9780857090676
BALASUBRAMANIAN, M.: Composite materials and processing. CRC Press, 2014, ISBN 9781439879351
LUKASZEWICZ, DIRK H.-J. A.; WARD, C.; POTTER, K. D.: The engineering aspects of automated prepreg layup: History, present and future. Composites: Part B 43 (2012) pp. 997–1009
SEFERIS, J. C.; VELISARIS, C. N.; DRAKONAKIS, V. M.: Prepreg manufacturing. Wiley Encyclopedia of Composites, 2011
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2016 Springer-Verlag Berlin Heidelberg
About this chapter
Cite this chapter
Diestel, O., Hausding, J. (2016). Pre-impregnated Textile Semi-finished Products (Prepregs). In: Cherif, C. (eds) Textile Materials for Lightweight Constructions. Springer, Berlin, Heidelberg. https://doi.org/10.1007/978-3-662-46341-3_11
Download citation
DOI: https://doi.org/10.1007/978-3-662-46341-3_11
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-662-46340-6
Online ISBN: 978-3-662-46341-3
eBook Packages: EngineeringEngineering (R0)