Abstract
A new roll-based process and machine for three-dimensional bending of beams with symmetrical and asymmetrical cross-sections have been developed. Compared to conventional processes like stretch bending, the advantage of the Torque Superposed Spatial (TSS) bending is the kinematic adjustment of the bending contour, leading to higher flexibility and cost efficiency, especially in small batch production. To define the spatial geometry of the workpiece, a torque is superposed to the bending moment. Process principle, process control and the machine design of the new process are presented.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Chatti, S., Production of Profiles for Lightweight Structures, 2005, habilitation thesis, Books on Demand GmbH, Norderstedt, Germany.
Neugebauer, R., Drossel, W., -G., Lorenz, U., Luetz, N., 2002, Hexabend – A new Concept for 3D-free-form Bending of Tubes and Profiles to preform Hydroforming Parts and Endform Space-frame-components, In: Advanced Technology of Plasticity, Vol. 2, pp. 1465–1470.
Murata M., Kuboti T., Takahashi K., 2007, Characteristics of Tube Bending by MOS Bending Machine, In: Proc. of the 2nd Int. Conf. on New Forming Technology, Bremen, Germany, pp. 135–144.
Flehmig, T., Kibben, M., Kühni, U., Ziswiler, J., 2006, Device for the free forming and bending of longitudinal profiles, particularly pipes, and a combined device for free forming and bending as well as draw bending longitudinal profiles, particularly pipes, Int. patent with application no. PCT/EP2006/00252, published on 28.09.2006.
Corona, E., 2004, A simple analysis for bend-stretch forming of aluminium extrusions, Int. Journal of Mechanical Sciences, 46, pp. 433–448.
Geiger, M., Sprenger, A, 1998, Controlled Bending of Aluminum Extrusions, Annals of the ClRP 47/1, pp. 197–202.
Hermes, M., Kleiner, M.: Method and device for profile bending. Internationale Patentanmeldung, WO002008113562A1, Veröffentlichungsdatum 25.09.2008.
Chatti, S., Hermes, M., Tekkaya, A.E., Kleiner, M., 2010. The new TSS bending process: 3D bending of profiles with arbitrary cross-sections, CIRP Annals – Manufacturing Technology, Volume 59, Issue 1, p. 315–318.
N.N.: 3D BENDING – TORQUEFORMER, product information brochure, Schwarze Robitec GmbH, Köln
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2015 Springer-Verlag Berlin Heidelberg
About this chapter
Cite this chapter
Hermes, M., Staupendahl, D., Kleiner, M. (2015). Torque Superposed Spatial bending. In: Tekkaya, A., Homberg, W., Brosius, A. (eds) 60 Excellent Inventions in Metal Forming. Springer Vieweg, Berlin, Heidelberg. https://doi.org/10.1007/978-3-662-46312-3_59
Download citation
DOI: https://doi.org/10.1007/978-3-662-46312-3_59
Published:
Publisher Name: Springer Vieweg, Berlin, Heidelberg
Print ISBN: 978-3-662-46311-6
Online ISBN: 978-3-662-46312-3
eBook Packages: EngineeringEngineering (R0)