Abstract
This paper investigates a significant reduction in environmental noise attributable to changes in the Network Rail grinding strategy employed within Great Britain (GB). Acoustic Track Quality (ATQ) is a measure of the surface roughness of the running rails. Rail roughness has a major influence on wayside rolling noise levels during the passage of a train. Levels of ATQ have been determined for approximately 1,100 km of track on GB’s East and West Coast mainlines from wayside noise measurements and data collected by an under-floor microphone system fitted to a train. The results show a substantial apparent reduction in rail surface roughness and associated wayside noise levels since a similar study was undertaken in 2004, and demonstrate how a maintenance rail grinding strategy can potentially reduce wayside noise levels across large parts of a railway network.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
Craven, N., et al.: Responding to the environmental noise directive by demonstrating the benefits of rail grinding on the Great Britain’s railway network. Proc of the IMechE, Part F: Journal of Rail and Rapid Transit 227(6), 668–676 (2013)
The Department for Transport. Calculation of Railway Noise 1995. HMSO (1995)
Thompson, D.J.: Railway noise and vibration: Mechanisms, modelling and means of control. Elsevier Ltd. (2009) ISBN-13: 978-0-08-045147-3
Schulte-Werning, B., et al.: Headed for the low-noise railway: the DB noise reduction research programme. In: Proc. WCRR 2001 (2001)
Hardy, A.E.J., Jones, R.R.K.: Rail and wheel roughness – implications for noise mapping based on the Calculation of Railway Noise procedure. Defra, Report Number AEATR-PC&E-2003-002 (2004)
Hardy, A.E.J., Jones, R.R.K., Turner, S.: The influence of real-world rail head roughness on railway noise prediction. JSV 293, 965–974 (2006)
Jones, R.R.K.: Trends in GB rolling stock noise levels. Rail Safety and Standards Board, Report Number DeltaRail-ES-2009-005 (2009)
2011/229/EU: Commission Decision of 4 April 2011 concerning the technical specifications of interoperability relating to the subsystem ‘rolling stock noise’ of the trans-European conventional rail system (notified under document C(2011) 658) (2011)
Peters, S.: The prediction of railway noise profiles. Journal of Sound and Vibration 32(1), 87–99 (1974)
EN 15610:2009 Railway applications— Noise emission— Rail roughness measurement related to rolling noise generation
Hardy, A.E.J.: Draft proposal for noise measurement standard for ERRI committee C163. Report RR-SPS-97-012 of AEAT Rail Ltd. Published through European Rail Research Institute (1997)
Dings, P.C., Dittrich, M.G.: Roughness on Dutch railway wheels and rails. JSV 193, 103–112 (1996)
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2015 Springer-Verlag Berlin Heidelberg
About this paper
Cite this paper
Craven, N.J., Bewes, O.G., Fenech, B.A., Jones, R.R.K. (2015). Investigating the Effects of a Network-Wide Rail Grinding Strategy on Wayside Noise Levels. In: Nielsen, J., et al. Noise and Vibration Mitigation for Rail Transportation Systems. Notes on Numerical Fluid Mechanics and Multidisciplinary Design, vol 126. Springer, Berlin, Heidelberg. https://doi.org/10.1007/978-3-662-44832-8_44
Download citation
DOI: https://doi.org/10.1007/978-3-662-44832-8_44
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-662-44831-1
Online ISBN: 978-3-662-44832-8
eBook Packages: EngineeringEngineering (R0)