Abstract
On the Generation of Temperatures to 30,000° K. The attainment of high temperatures under stable, steady-state conditions was once limited not only by the materials themselves but also by the means of generating such temperatures. Thus research was handicapped, since materials could not be exposed to these high temperatures and their properties studied.
The drawbacks of conventional methods of heating materials are briefly touched upon, and various techniques for heating materials without crucibles and in controlled atmosphere are pointed out.
The convenience of using electromagnetic radiation from a suitable source instead of the source environment itself, and the research applications of furnaces using solar energy and high-intensity electric arcs are discussed in some detail.
In addition, the techniques of the stabilized-gas vortex arc are described and the temperature limits mentioned. Future developments in even higher temperature ranges are touched upon.
Zusammenfassung
Über die Erzeugung von Temperaturen bis 30000° K. Die Erreichung höherer Temperaturen unter stabilen, gleichmäßigen Bedingungen war einst nicht nur durch die Materialien selbst beschränkt, sondern auch durch die Methoden der Erzeugung solcher Temperaturen. Diese Forschungsrichtung war beeinträchtigt, da die Materialien nicht diesen hohen Temperaturen ausgesetzt und ihre Eigenschaften dabei studiert werden konnten.
Auf die Nachteile konventioneller Methoden der Erhitzung von Materialien wird kurz eingegangen und verschiedene Arbeitsweisen zur Erhitzung von Materialien ohne Tiegel und in kontrollierter Atmosphäre werden hervorgehoben.
Etwas eingehender wird der Vorteil der Verwendung elektromagnetischer Strahlung aus einer geeigneten Strahlungsquelle statt der Umgebung der Strahlungsquelle selbst besprochen und ebenso die Forschungsverwendung von Öfen, die Sonnenenergie und elektrische Bögen hoher Intensität benützen.
Des weiteren wird die Technik des stabilisierten Gaswirbel-Bogens beschrieben und auf die Temperaturgrenzen eingegangen. Es werden auch künftige Entwicklungen im Bereich noch höherer Temperaturen berührt.
Résumé
Sur l’obtention de températures atteignant 30000° K. L’obtention de hautes températures dans des conditions permanentes et stables était autrefois limitée non seulement par les matériaux eux-mêmes mais aussi par les méthodes utilisées. Ceci constituait une limitation aux recherches sur les propriétés des matériaux aux hautes températures.
Les inconvénients des méthodes conventionnelles sont brièvement esquissées et plusieurs techniques proposées pour chauffer les matériaux sans creuset en atmosphère contrôlée.
Les facilités présentées par le rayonnement électromagnétique de sources appropriées et les applications de fours à rayonnement solaire ou utilisant des arcs électriques de haute intensité sont discutées en détail.
En outre les techniques utilisées dans l’arc à tourbillon gazeux stabilisé sont décrites ainsi que les limitations de température. Les extensions futures aux températures encore plus élevées sont esquissées.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
I. E. Campell, High Temperature Technology. New York: Wiley & Sons, Inc., 1956.
C. Agte and H. Althertum, Z. techn. Physik 11, 182 (1930).
Ajax Electrothermic Corp.
W. H. Davenport, S. S. Kistler, et al., Amer. Ceram. Soc. 33, 333 (1950).
T. T. Magel, P. A. Kulin. and A.R. Kaufman, J. Metals 4, 295 (1952).
D. M. Wroughton, E. K. Okres et al., J. Electrochem. Soc. 99, 205 (1952).
W. E. Kuhn, Arcs in Inert Atmospheres and Vacuum. New York: Wiley & Sons, Inc., 1956.
J. W. Pugh, R. L. Hadley and R. W. Hessing, Metal Progr. 63, 70 (1953).
M. Davis, A. Calverley and R. F. Lever, J. Appl. Physics 27, 195 (1956).
F. Trombe and M. Foex, Métaux 31, 126 (1956).
O. Beck, Elektrotechn. Z. 42, 993 (1921).
W. Finkelnburg and J. P. Latil, J. Opt. Soc. America 44, 1 (1954).
T.P. Davis, L. J. Krolak, et al., J. Opt. Soc. America 44, 766 (1954).
T. R. Broida, U. S. Naval Radiological Defense Laboratory Report USNRDL-417 (1952).
A. D. Kirshenbaum and A. V. Grosse, J. Amer. Chem. Soc. 78, 2020 (1956).
J. B. Conway and A. V. Grosse, Second Technical Report, Office of Naval Research, High Temperature Project, Contract N 9-onr-87301 (1952).
H. E. Petschek, P. H. Rose, et al., J. Appl. Physics 26, 83 (1955).
J. D. Cobine and D. A. Wilbur, J. Appl. Physics 22, 835 (1951).
G. Busz and W. Finkelnburg, Naturwiss. 40, 550 (1953).
W. Finkelnburg, Physik und Technik des Hochstromkohlebogens. Leipzig: Akad. Verlagsges., 1944.
H. Gerdien and A. Lotz, Wiss. Veröff. Siemens-Konzern 2, 489 (1922).
H. Maecker, Z. Physik 129, 108 (1951).
F. Burhorn, H. Maecker and Th. Peters, Z.Physik 131, 28 (1951).
Th. Peters, Naturwiss. 24, 571 (1954).
Th. R. Hogeness, University of Chicago, Midway Laboratories.
O. Schonherr, Elektrotechn. Z. 30, 365 (1909).
H. Fischer, Proc. Symposium “High Temperature”, Stanford University, Cal., June, 24–26 (1956).
I. V. Kurchatov, Discovery 1956, 227.
B. Eiselt, Z. Physik 132, 54 (1952).
A. C. Kolb, Naval Research Laboratory, Office of Naval Research (1956).
Author information
Authors and Affiliations
Editor information
Rights and permissions
Copyright information
© 1958 Springer-Verlag Wien
About this chapter
Cite this chapter
Glaser, P.E. (1958). On the Generation of Temperatures to 30,000° K. In: Hecht, F. (eds) VIIIth International Astronautical Congress Barcelona 1957 / VIII. Internationaler Astronautischer Kongress / VIIIe Congrès International D’Astronautique. Springer, Berlin, Heidelberg. https://doi.org/10.1007/978-3-662-39990-3_12
Download citation
DOI: https://doi.org/10.1007/978-3-662-39990-3_12
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-662-39020-7
Online ISBN: 978-3-662-39990-3
eBook Packages: Springer Book Archive