Advertisement

Total environmental quality management

  • Thomas T. Shen
Part of the Environmental Engineering book series (ESE)

Abstract

Pollution prevention is a concept and practice that has quickly taken us beyond our traditional “command and control” approach to controlling waste and toxic emissions. Because the concept focuses on not generating waste in the first place, it has forced companies to look at the flow of chemicals in the workplace and to look at where and why wastes are generated. Decisions related to pollution prevention have to be made before waste is ever generated from those involved in product and process design and operation, to those making decisions about materials use.

Keywords

Product Category Management Control System Environmental Audit Waste Prevention Audit Team 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. Abt Associates Inc (1990) Consumer Purchasing Behavior and the Environment: Results of an Event-Based Study, NovemberGoogle Scholar
  2. ADL (1983) “Benefits to Industry of Environmental Auditing”. Report of the Center for Environmental Assurance, Arthur D. Little, Inc to USEPAGoogle Scholar
  3. Allen TD et al. (1992) Pollution Prevention: Homework & Design Problems For Engineering Curricula. Dept. of Chemical Engineering, University of California at Los Angeles Bailey PE (1991) “Life-Cycle Costing and Pollution Prevention,” Pollution Prevention Review, Vol. 1, No. 1, p. 27Google Scholar
  4. Bergeson LL (1994) “Federal Procurement Will Never Be The Same,” Pollution Engineering, Vol. 26, No. 1, p. 87Google Scholar
  5. Chemecology (1993) Design with the Environmental Mind. Chemecology Vol. 22, No. 3 Cude Brenda (1991) Comments prepared for FTC public hearings on environmental marketing and adverting claims on July 11, University of IllinoisGoogle Scholar
  6. Evers DP (1995) “Facility Pollution Prevention Planning;’ in: Industrial Pollution Prevention Handbook, ed. by HM Freeman. McGraw-Hill, Inc., pp. 155–170Google Scholar
  7. Frankel CF, Coddington W (1993) “Environmental Marketing”, in: Environmental Strategies Handbook, ed. by RV Kolluru., pp. 654–663Google Scholar
  8. Fromm CR and MS Callahan (1986) “Waste Reduction Audit Procedures–A Methodology for Identification, Assessment and Screening of Waste Minimization Options.” Waste Minimization Programs, Hazardous Materials Control Research Institute Conference Proceedings, Atlanta, Georgia. pp. 427–435Google Scholar
  9. German Ministry for Environment (1990) Documentation of International Conference on Environmental Labeling - State of Affairs and Future Perspectives for Environment Related Product Labeling, July 5–6, 1990, Berlin, GermanyGoogle Scholar
  10. Guida JF (1982) “A Practical Look at Environmental Audits.” J. of Air Pollution Control Association, Vol. 32, No. 5, pp. 568–573CrossRefGoogle Scholar
  11. Hashimoto M (1990) “The Ecomark System in Japan”, in: German Federal Ministry for Environment, Nature Conservation, and Nuclear Safety. Documentation, International Conference on Environmental Labeling, July 5–6, 1990, Berlin, GermanyGoogle Scholar
  12. Hayes D (1990) “Harnessing Market Forces to Protect the Earth,” Issues in Science and Technology, Winter 1990–1991Google Scholar
  13. Henn CL and JA Fava (1993) “Life-Cycle Analysis and Resource Management;’ in: Environmental Strategies Handbook, ed. by RV Kolluru, pp. 550–533Google Scholar
  14. ICC (1989) Environmental Auditing. International Chamber of Commerce, ISBN No. 92842–1089–5Google Scholar
  15. International Chamber of Commerce (1991). Environmental Labeling, Volume I, House of Commons Paper 474-IGoogle Scholar
  16. Keoleian GA and D Meanery (1993) Life-Cycle Design Guidance Manual. Contract Report of the National Pollution Prevention Center, University of Michigan, Ann Arbor, MI., EPA/600/R-92/226, JanuaryGoogle Scholar
  17. Keoleian GA, D Meanery and MA Curran (1993) “A Life-Cycle Approach to Product System Design.” Pollution Prevention Review, pp. 293–306, Summer 1993Google Scholar
  18. Keoleian GA and D Meanery (1994) “Sustainable Development: Review of Life-Cycle Design and Related Approaches,” J. AWMA Vol. 44, p. 664Google Scholar
  19. Kolluru RV and Rao (eds) (1994) Environmental Strategies Handbook: A Guide to Effective Policies and Practices, McGraw-Hill, New YorkGoogle Scholar
  20. Kolluru RV and Rao (eds) (1996) Risk Assessment and Management Handbook for Environmental, Health, and Safety Professionals, McGraw-Hill, New YorkGoogle Scholar
  21. Ling JT (1994) Personal communicationGoogle Scholar
  22. Molak V (1995) “Application of Risk Analysis to Set Pollution Prevention Priorities;’ in: Industrial Pollution Prevention Handbook, ed. by HM Freeman. McGraw–Hill Inc., New York, ISBN 0–07–022148–0, pp. 197 – 199Google Scholar
  23. Neitzel H (1992) “Experience with the Blue Angel Scheme Working Methods, Problems, Balance, and Perspectives.” Presented at the Annual Conference of the Environmental Law Network International, Athens, Greece, October 9–10, 1992Google Scholar
  24. NYSDEC (1989) New York State Waste Reduction Manual. NYS Department of Environmental Conservation, Albany, NYGoogle Scholar
  25. OTA (1992) Green Products by Design: Choice for a Cleaner Environment, Office of Technology Assessment, Congress of the United States, Washington, D.C.Google Scholar
  26. Royston MG and TM McCarthy (1988) The Environmental Management Audit. Industry and Environment Review, Vol. 11, No. 4, p. 20Google Scholar
  27. SCS (1993) Life-Cycle Assessment & the Environmental Report Card. Scientific Certification Systems, Oakland, Ca.Google Scholar
  28. SETAC (1991). A Technical Framework for Life-Cycle Assessments, published by Society for Environmental Toxicology and Chemistry, Washington, D.C.Google Scholar
  29. SETAC (1993) Guidelines for Life-Cycle Assessment: A Code of Practice. From the workshop held at Sesimbra, Portugal, March 31-April 3, 1993. Society for Environmental Toxicology and Chemistry, Washington, D.C.Google Scholar
  30. Shen TT (1996) “Beyond Pollution Prevention: Design for Environment and Sustainability”. Presented at the 1996 Pollution Prevention Annual Conference“ in Chungli, Taiwan, December 17–19Google Scholar
  31. UK (1993) UK Ecolabeling Board Newsletter No. 5, LondonGoogle Scholar
  32. UNEP (1991) Global Environmental Labeling: Invitational Expert Seminar, Lesbos, Greece, September 24–25, 1990. Working Group on Policies, Strategies and Instruments of the UNEP/IEO Cleaner Production ProgramGoogle Scholar
  33. USEPA (1984) Risk Assessment and Management: Framework for Decision Making. EPA 600/9–85–002, pp. 13–22, OctoberGoogle Scholar
  34. UNEP (1988) Environmental Auditing. Published in “Industry and Environment Review” by the United Nations Environment Programme. Geneva, SwitzerlandGoogle Scholar
  35. USEPA (1990) Environmental Labeling in the US: Background Research, Issues, and Recommendations. Draft prepared by Applied Decisions Analysis, Inc., Washington, D.C., February 1990Google Scholar
  36. USEPA (1992) Chapter 7 Designing Environmentally Compatible Products of Facility Pollution Prevention Guide, Office of R&D, Washington D.C. EPA/600/R-92/088, May, 1992 USEPA ( 1993a ) The Use of Life-Cycle Assessment in Environmental Labeling. University ofGoogle Scholar
  37. Tennessee for Office of Pollution Prevention and Toxics, Washington, D.C., EPA/742-R-93–003, SeptemberGoogle Scholar
  38. USEPA (1993b) Life-Cycle Assessment: Inventory Guidelines and Principles. Battle and Franklin Associates for Office of R&D, Risk Reduction Engineering Laboratory, Cincinnati, Oh., EPA/600/R-92/254, February 1993Google Scholar
  39. USEPA (1993c) Life-Cycle Impact Assessment: Framework Issues. Research Triangle Institute, Center for Economics Research, Environmental Management Systems, RTP, NC, February 1993Google Scholar
  40. USEPA (1993d) Status Report on Use of Environmental Labels Worldwide. Abt Associates Inc. for Office of Pollution Prevention and Toxics, Washington, D.C., EPA/742-R-9–93001, SeptemberGoogle Scholar
  41. Van Weenan JC (1990) Waste Prevention: Theory and Practice. CIP-Gegevans Koninklije Bibliostheek, The HagueGoogle Scholar
  42. Vigon BW et al. (1993) Life-Cycle Assessment: Inventory Guidelines and Principles. Contract Report of Battelle Research Institute, Columbus, Oh., EPA/600/R-92/245Google Scholar
  43. WWF (1993) Rethinking the Materials We Use: A New Focus for Pollution Policy. WorldGoogle Scholar
  44. Wildlife Fund Publication, TD 793.95.R48, Washington, D.C., ISBN 0–89164–140–8Google Scholar

Copyright information

© Springer-Verlag Berlin Heidelberg 1999

Authors and Affiliations

  • Thomas T. Shen
    • 1
  1. 1.DelmarUSA

Personalised recommendations