Abstract
The steam reforming process converts hydrocarbons into mixtures of hydrogen, carbon monoxide, carbon dioxide, and methane
The expression reforming is misleading since it is used also for the well-knowm process for improvement of the octane number of gasoline [1]. In the gas industry, reforming has generally been used for “the changing by heat treatment of a hydrocarbon with high heating value into a gaseous mixture of lower heating value” [2].
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
Similar content being viewed by others
References
Sinfelt, J. H.: In: Catalysis, Science and Technology (Anderson, J. R.; Boudart, M., eds.). Springer, Berlin Heidelberg New York, 1981. Vol. 1 p. 257.
Kirk, R. E.; Othmer, D. F.; Scott, J. D.; Standen, A.: Encyclopedia of Chemical Technonology. Interscience Inc., Vol. 8, 792 (1952).
Padovani, C.: Inst. Gas Ing. J. 4, 760 (1964).
Jockei, H.: In: Ulimann Encyklopädie der Technischen Chemie. Weinheim, 1977, Verlag Chemie, Vol. 14, p. 403.
Bridger, G. W.; Chinchen, G. C.: In: Catalyst Handbook, Wolfe Scientific Books, London 1970, p. 64.
Bridger, G. W.: In: Catalysis Vol. 3, (Kemball, C., and Dowden, D. A., eds.) (Specialist Periodical Reports), London 1980, The Chemical Society, p. 39.
Rostrup-Nielsen, J. R.: Steam Reforming Catalysts, Danish Technical Press Copenhagen 1975.
Ross, J. R. H.: In: Surface and Defect Properties of Solids, (Roberts, M. W., and Thomas, J. M., eds.) (Specialists Periodical Reports), London 1974, The Chemical Society, Vol. 4, p. 34.
Trimm, D. L.: Catal. Rev.-Sci. Eng. 16, 155 (1977).
van Hook, J. P.: Catal. Rev.-Sci. Eng. 21, 1 (1981).
Bartholomew, C. H.: Catal. Rev.-Sci. Eng‘ 24, 67 (1982).
Grenoble, D. C.: J. Catal. 51, 203 (1978).
Tomita, T.; Kitagawa, M.: Chem. Ing. Tech. 49, 469 (1977).
Dry, M. E.: In: Catalysis, Science and Technology, (Anderson, J. R. and Boudart, M., eds.), Springer, Berlin Heidelberg New York 1981, Vol. 1, p. 159.
Lihou, D. A.: Chem. Process Eng. 46, 487 (1965).
Morse, P. L.: Hydrocarbon Process 52,(1) 113 (1973).
Hampson, G. M.: Chem. Eng. (Lomdon) p. 523 (1979).
Kjær, J.: Computer Methods in Gas Phase Thermodynamics, Haldor Topsøe, Vedbæk 1972.
Rostrup-Nielsen, J. R.: Ammonia Plant Saf. 15, 82 (1973).
Andrew, S. P. S.: Ind. Eng. Chem. Prod. Res. Develop. 8, 321 (1969).
Froment, G. F.: Chem. Eng. Sci. 36, 1271 (1981).
Davy, H.: Phil. Trans. Roy. Soc. London, 107, 77 (1817).
Tessie Du Motay, M., Maréchal, M.: Bull. Soc. Chim. France 9, 334 (1868).
DRP 51572, 1889 (Mond, L. and Langer, C.), Chem. Zentralbl. II, 32 (1890).
Lang, J.: Z. Phys. Chem. 2, 161 (1888).
DRP 229406, 1909 (Dieffenbach, O., and Moldenhauer, W.).
DRP 296866, 1912 (BASF (Mittasch, A., and Schneider, C.)).
Sabatier, P.: La Catalyse en Chimie Organique, Librarie Polytéchnique, Paris 1920.
Neumann, B.; Jacob, K.: Z. Elektrochem. 30, 557 (1924).
Fischer, F.; Tropsch, H.: Brennst. Chem. 3, 39 (1928).
Liander, H.: Trans. Faraday Soc. 25, 462 (1929).
Fraser, O. B. J.: Trans. Electrochem. Soc. 71, 425 (1937).
U.S. Pat. 1 934 836, 1927 (I.G. Farben, (Wietzel, G., Haller, W., and Hennicke, W.)).
U.S. Pat. 2 056 911, 1932 (I.G. Farben (Schiller, G., and Wietzel, G.)).
Byrne, Jr. P. J.; Gohr, R. J.; Haslam, R. T.: Ind. Eng. Chem. 24, 1129 (1932).
Gard, N. R.: Nitrogen 39, 25 (1966).
Topsøe, H. F. A.; Fossum Poulsen, H.; Nielsen, A.: Chem. Eng. Prog. 63, 67 (1967).
Cockerham, R. G.; Percival, G.: Trans. Inst. Gas Eng. 107, 390 (1956/57).
BRIT. Pat. 820 257, 1958 (Gas Council, (Dent, F. J., Cockerham, R. G., and Percival, G.)).
Davies, H. S.; Humphries, K. J.; Hebden, D.; Percy, D. A.: Inst. Gas Eng. J. 7, 708 (1967).
Jockei, H.; Triebskorn, B. E.: Hydrocarbon Process. 52,(1) 93 (1973).
Ishiguro, T.: Hydrocarbon Process. 47,(2) 87 (1968).
Czuppon, T. A.; Buvidas, L. J.: Hydrocarbon Process. 58,(9) 197 (1979).
Lastigzon, J.: Technical Bull. T-22, International Fertilizer Development Center (UNIDO) 1981.
Corneil, H. G.; Heinzelmann, F. J.: In: Hydrogen, Production and Manufacture, (Smith, W. N., and Santangelo, J. G., eds.). ACS-symposium Series 116, Amer. Chem. Soc. Washington 1980, p. 147.
Rose, F.: Stahl. Eisen 95, 1012 (1975).
Manley, J.: Metals Bull., Dec. 1981, p. 49.
Congram, G. E.: Oil Gas J. 74, 74 (1976).
Dybkjær, I.: Chem. Econ. Eng. Review 13, 17 (1981).
Chang, C. D.: Catal. Rev.-Sci. Eng. 25, 1 (1983).
Gilles, E. A.: Chem. Eng. Prog. 76 (10) 88 (1980).
Minet, R. G.; Olesen, O.: In: Hydrogen Production and Marketing, (Smith, W. N., and Santangelo, J. G., eds.)). ACS-symposium Series 116, Amer. Chem. Soc. Washington 1980, p. 67.
Fedders, H.; Harth, R.; Höhlein, B.: Nucl. Eng. Des. 34, 119 (1975).
Jørn, E.; Skov, A.; Harms, H.; Höhlein, B.: Oil and Gas J. 78, 120 (1980).
Miyasugi, T.; Kosaka, S.; Mukai, K.; Suziki, A.: J. Japan Petrol. Inst. 25, 260 (1982).
Chem. Eng. News. July 30, 26 (1979).
Richardson, J. T.: (to be pusblished).
Sjöström, K.: Ind. Eng. Chem. Process Des. Dev. 19, 148 (1980).
Nielsen, A.; Hansen, J. B.; Houken, J.; Gam, E. A.: Plant/Oper. Progr. 1,(3) 186 (1982).
Topsøe, H.; Rostrup-Nielsen, J. R.: Scan. J. Metallurgy 8, 168 (1979).
Töpfer, H. J.: Gas Wasserfach 117, 412 (1976).
Suga, Y.; Mori, T.: In: Reduccion directa’ 80, Proc. 4th ILAFA-Direct Reduction Congress ILAFA Buenos Aires 1980.
Zardi, U.; Antonini, A.: Nitrogen 122, 33 (1979).
Raghuraman, K. S.; Johansen, T.: In: Proc. Symp. on “Science and Catalysis and its Application in Industry”, FPDIL, Sindri 22–24 Feb. 1979, p. 418.
Nutting, J.: In: Materials Technology in Steam Reforming Processes, (Edelnau, C., ed.). Pergamon Press, London 1966, p. 11.
Estruch, B.; Lyth, C.: Materials Technology in Steam Reforming Processes, (Edelnau, C., ed.). Pergamon Press, London 1966, p. 29.
Kawai, T.; Takemura, K.; Shibasaki, T.; Mohri, T.: Ammonia Plant Saf. 22, 119 (1980).
Zeis, L. A.; Heinz, E.: Ammonia Plant Saf. 12, 55 (1970).
Salot, W. J.: Ammonia Plant Saf. 13, 119 (1971).
Appl, M.; Gössling, H.: Chem. Z. 96, 135 (1972).
Blythe, B. M.; Sampson, R. W.: Oil and Gas J. 72, 91 (1974).
Singh, C. P. P.; Saraf, D. N.: Ind. Eng. Chem. Process Des. Dev. 18, 1 (1979).
Roesler, F. C.: Chem. Eng. Sci. 22, 1325 (1967).
Hottel, H. C.; Cohen, E. S.: AIChE Journal 4, 3 (1958).
Vercammen, H. A. J.; Froment, G. F.: In: Proc. 5th Int. Symp. Chemical Reaction Engineering — Houston, (Weekmann Jr., V. W., and Luss, D. Jr., eds.) ACS Symposium series 65, Amer. Chem. Soc. Washington 1978, p.
Lenoir, J. M.: Hydrocarbon Process. 48(10) 87 (1969).
Blythe, B. M.; Sampson, R. W.: Oil and Gas J. 72, 60 (1974).
Topsøe, H.: Inst. Gas Eng. J. 6, 401 (1966).
Hyman, M. H.: Hydrocarbon Process. 47,(7) 131 (1968).
Grover, S. S.: Hydrocarbon Process. 49,(4) 109 (1970).
Golebiowski, A.; Wasala, T.: Int. Chem. Eng. 13 133 (1973).
Froment, G. F.; Bischoff, K. B.: Chemical Reactor Analysis and Design, John Wiley & Sons. New York 1979.
Rostrup-Nielsen, J. R.; Wrisberg, J.: Proc. Int. Conf. on Natural Gas Processing and Utilization, Dublin 1976, p. 5-53.
Froment, G. F.: Ind. Eng. Chem. 59, 19 (1967).
Rostrup-Nielsen, J. R.; Christiansen. L. J.: In: Proc. 6th Simposio Ibero-Americano de Catalise, 1978. Rio de Janeiro 1978, p. 1615.
Christiansen, L. J.; Tøttrup, P. B.: (to be pusblished).
Villadsen, J.; Michelsen, M. L.: Solution of Differential Equation Model by Polynomial Approximation. Prentice-Hall, New York 1977.
Sundaram, K. M.; Froment, G. F.: Chem. Eng. Sci. 35, 364 (1980).
Schlünder, E. U.: In: Chemical Reaction Engineering Reviews-Houston ACS Symposium Series 72, (Luss, D., and Weekman, Jr., V. W., eds.), Amer. Chem. Soc. Washington 1978, p. 110.
Bridger, G. W.: Chem. Process Eng. 53, 38 (1972).
Jones, F. W. S.: Ammonia Plant Saf. 12, 61 (1970).
Nickiin, T.; Whitaker, R. J.: Inst. Gas Eng. J. 8, 15 (1968).
Brit. Pat. 1 182 829, 1967 (Haldor Topsoe (Rostrup-Nielsen J. R.)).
Dowden, D. A.; Schnell, C. R.; Walker, G. T.: 4th Int. Congr. Catal., Moscow 1968, preprint 62.
Trimm, D. L.: Design of Industrial Catalysts, Elsevier, Amsterdam 1980, p. 169.
Williams, A.; Butler, G. A.; Hammonds, J.: J. Catal. 24, 352 (1972).
Pedersen, K.; Skov, A.; Rostrup-Nielsen, J. R.: Prepr. ACS Div. Fuel Chem. 25(2), 89, (1980).
Erekson, E. J.; Sughrue, E. L.; Bartholomew, C. H.: Fuel Process. Technol. 5, 91 (1981).
Tiwari, R. N.; Sengupta, P. K.; Chakravorty, B. K.; Hazra, P. K.: Fertilizer Technol. 12, 352 (1975).
Cooke, P. W.; Hareshape, J. N.: Trans. Faraday Soc, 43, 43 (1947).
Gaugin, R.; Graulier, M.; Papee, D.: Adv. Chem. Ser. 143, 147 (1975).
Fleming, H. W.; Cromeans, J. S.: Ammonia Plant Saf. 13, 85 (1971).
Aleksić, B. R.; Stefanović, M. M.; Aleksić, B. D.; Vujović-Djordjević, B. D.; Arandjelović, P. S.; Jovanović, N. N.; Mihajlović, L. M.: Chem. Tech. 28, 89 (1976).
Barin, I.; Knacke, O.: Thermochemical properties of inorganic substances, Springer, Berlin Heidelberg New York 1973, C. Supplement 1977.
Chown, J.; Deacon, R. F.: Trans. Brit. Ceram. Soc. 63, 91 (1964).
Raymond, R. J.; Brindley, G. W.: Trans. Faraday Soc. 61, 1017 (1965).
Takemura, Y.; Yamamoto, K.; Morita, Y.: Int. Chem. Eng. 7, 737 (1967).
Alzarmora, L. E.; Ross, J. R. H.; Kruissink, E. C.; van Reijnen, L. L.: J. Chem. Soc. Faraday Trans. I 77, 665 (1981).
Blume, H.; Becker, K.; Engels, S.; Hille, J.; Maye, H.; Richter, K.: Z. anorg. allg. Chem. 405, 211 (1974).
Simosova, L. G.; Dzis’ko, V. A.; Borisova, M. S.; Karakchiev, L. G.; Olen’kova, I. P.: Kinet. Katal. 14, 1566 (1973).
Lo Jacono, M.; Schiavello, M.; Cimino, A.: J. Phys. Chem. 75, 1044 (1971).
Nikolajenko, V.; Danes, Vl.: Kinet. Katal. 7, 1025 (1966).
Hahn, Jr., W. C.; Muan, A.: J. Phys. Chem. Solids 19, 338 (1961).
Ross, J. R. H.; Steel, M. C. F.: J. Chem. Soc. Faraday Trans. 169, 10 (1973).
Vignes, S.; Jeannot, F.: Rev. Inst. Fr. Petrole. Ann. Combust. Liquides, 21, 875 (1966).
Fricke, R.; Weitbrecht, G.: Z. Elektrochem. 48, 87 (1942).
Rankin, J. D.; Livingstone, J. G.: Ammonia Plant Saf. 23, 203 (1981).
Bandrowski, J.; Bickling, C. R.; Yang, K. H.; Hougen, O. A.: Chem. Eng. Sci. 17, 379 (1962).
Boldyrev, V. V.; Bulens, M.; Delmon, B.: The Control of the Reactivity of Solids, Elsevier, Amsterdam 1979.
Noskova, S. P.; Bovisova, M. S.; Dzis’ko, V. A.; Alabucher, Y. A.: Kinet. Katal. 15, 592 (1974).
Arora, B. R.; Banerjee, A. K.; Mandai, N. K.; Ganguli, N. C.; Sen, S. P.: Technol. 10, 193 (1973).
Banerjee, A. K.; Nardu, S. R.; Ganguli, N. C.; Sen, S. P.: Technol. 11, 162 (1974).
Sen, S. P.; Majumdar, D. S.; Hazra, P. K.; Prasad, R.; Gosh, S. K.; Bhattacharyya, N. B.: Technol. 11, 149 (1974).
Eischens, R. P.: In The Physical Basis for Heterogeneous Catalysis, (Drauglis, E., and Jaffee, R. E., eds.), Plenum, New York 1975, p. 485.
Nowak, E. J.; Koros, R. M.: J. Catal. 7, 50 (1967).
Takemura, Y.; Morita, Y.; Yamamoto, K.: Int. Chem. Eng. 6, 725 (1966).
Nikolajenko, V.; Danes, Vl.; Krivanek, M.: Kinet. Katal. 7, 816 (1966).
Tikkanen, M. H.; Rosell, B.-O.; Wiberg, Ö.: Acta Chem. Scan. 17, 513 (1963).
Blank, S. L.; Pask, J. A.: J. Amer. Ceram. Soc. 52, 669, (1969).
Pettit, F. S.; Randklev, E. H.; Feiten, E. J.: J. Amer. Cer. Soc. 49, 199 (1966).
Tournayan, L.; Frety, R.; Charcosset, H.; Trambouze, Y.: Ind. Chim. Belg. 38, 496 (1973).
Leva, M.: Ind. Eng. Chem. 40, 747 (1948).
Satterfield, C. N.: Mass Transfer in Heterogeneous Catalysis, MIT Press, Cambridge 1970, p. 138.
Schoubye, P.: Chem. Eng. World, 5, 40 (1970).
Coenen, J. W. E.; Linsen, B. G.: In Physical and Chemical Aspects of Adsorbents and Catalysts, (Linsen, B. G., ed.), Academic Press, London, New York 1970, p. 471.
Shephard, F. E.: J. Catal. 14, 148 (1969).
Sørensen, O.; Topsøe, He.; Villadsen, Jø.: (unpublished results).
Yacaman, M. J.; Fuentes, S.; Dominquez, J. M.: Surface Sci. 106, 472 (1981) p. 290.
Smith, D. J.; Marks, L. D.: Phil. Mag. A 44, 735 (1981).
Anderson, J. R.: Structure of Metallic Catalysts, Academic Press, New York 1975.
Beeck, O.: Advan. Catal. 2, 151 (1950).
Selwood, P. W.: J. Catal. 42, 148 (1976).
Smith, J. S.; Thrower, P. A.; Vannice, M. A.: J. Catal. 68, 270 (1981).
Pannell, R. B.; Chung, K. S.; Bartholomew, C. H.: J. Catal. 46, 340 (1977).
McCarthy, J. G.; Wise, H.: J. Chem. Phys. 72, 6332 (1980).
Erley, W.; Wagner, H.: J. Chem. Phys. 72, 2207 (1980).
Gundry, P. M.; Tompkins, F. C.: Trans. Faraday Soc. 53, 218 (1957).
Delia Gatta, G.; Fubini, B.; Ghiotti, G.; Morterra, C.: J. Catal. 43, 90 (1976).
Beeck, O.; Ritchie, A. W.: Discuss. Faraday Soc. 8, 159 (1950).
Klemperer, D. F.; Stone, F. S.: Proc. Roy. Soc. A243, 375 (1957).
Lapujoulade, J.; Neil, K. S.: Surface Sci. 35, 288 (1973).
Martin, G. A.; Ceaphalan, N.; de Montgolfier, P.; Imelik, B.: J. Chim. Phys. 70, 122 (1973).
Batholomew, C. H.; Pannell, R. B.: J. Catal. 65, 390 (1980).
Eberhardt, W.; Greuter, F.; Plummer, E. W.: Phys. Rev. Lett. 46, 1085 (1981).
Nørskov, J. K.: Phys. Rev. Lett. 48, 1620 (1982).
Vaska, L.; Seiwood, P. W.: J. Amer. Chem. Soc. 80, 1331 (1958).
Coenen, J. W. E.; Wells, P. B.: In Proc. 3rd Int. Symp. Scientific Bases for the Preparation of Heterogeneous Catalysts, (Delmon, B. ed.) (in press).
Rostrup-Nielsen, J. R.: J. Catal. 11, 220 (1968).
Den Besten, I. E.; Selwood, P. W.: J. Catal. 1, 93 (1962).
Saleh, J. M.; Kemball, C.; Roberts, M. W.: Trans. Faraday Soc. 57, 1771 (1961).
Perdereau, M.: C. R. Acad. Sci. Ser. C 267, 1107 (1968).
Bartholomew, C. H.; Agrawal, P. K.; Katzer, J. R.: Advan. Catal. 31, 135 (1983).
Rosenqvist, T.: J. Iron Steel Inst. London 176, 37 (1954).
Edmonds, T.; McCarroll, J. J.; Pitkethly, R. C.: J. Vac. Sci. Technol. 8, 68 (1971).
Perdereau, M.; Oudar, J.: Surface Sci. 20, 80 (1970).
Erley, W.; Wagner, H.: J. Catal. 51, 229 (1978).
Demuth, J. E.; Jepsen, D. W.; Marcus, P. M.: Phys. Rev. Let. 32, 1182 (1974).
Delescluse, P.; Masson, A.: Surface Sci. 100, 423 (1980).
Demuth, J. E.; Rhodin, T. N.: Surface Sci. 45, 249 (1974).
Weeks, S. P.; Plummer, E. W.: Chem. Phys. Lett. 48, 601 (1977).
Rhead, G. E.: Surface Sci. 47, 207 (1975).
Oudar, J.: Catal. Rev.-Sci. Eng. 22, 171 (1980).
McCarthy, J. G.; Wise, H.: J. Phys. Chem. 76, 1162 (1982).
Perdereau, M.: Surface Sci. 24, 239 (1971).
Oliphant, J. L.; Fowler, R. W.; Pannell, R. N.; Bartholomew, C. H.: J. Catal. 51, 229 (1978).
de Rosset, A. J.; Finstrom, C. G.; Adams, C. J.: J. Catal. 1, 235 (1962).
Puri, V. K.; Mahapatra, H.; Ghorai, D. K.; Ganguli, N. C.; Sen, S. P.: Proc. Indian Nat. Sci. Acad. 41A, 30 (1975).
Rostrup-Nielsen, J. R.: Chem. Eng. World 5, 50 (1970).
Bridger, G. W.: Ammonia Plant Saf. 18, 24 (1976).
Bhattacharyya, N. B.; Majumdar, D. S.; Hazra, P. K.; Prasad, R.: Proc. Indian Nat. Sci. Acad. 41A, 90 (1975).
Martin, G. A.; Mirodatos, C.; Praliaud, H.: Appl. Catal. 1, 367 (1981).
Bartholomew, C. H.; Farrauto, R. J.: J. Catal. 45, 41 (1976).
Hermans, L. A. M.; Geus, J. W.: In: Proc. 2nd Int. Symp. on Scientific Bases for the Preparation of Heterogeneous Catalysts (Louvain-la-Neuve, 1978). (Delmon, B., Grange, P., Jacobs, P., and Poncelet, G., eds.), Elsevier, Amsterdam 1979, p. 113.
Rostrup-Nielsen, J. R: J. Catal. 31, 173 (1973).
Rostrup-Nielsen, J. R.: J. Catal. 21, 171 (1971).
Moayeri, M.; Trimm, D. L.: J. Chem. Soc. Faraday Trans. I 73, 1245 (1977).
Ruckenstein, E.; Pulvermacher, B.: AIChE Journal 19, 356 (1976).
Wynblatt, P.; Tal-Moou, A.: In Sintering and Catalysis. Materials Science Res. 10, 83 (1975).
Ruckenstein, E.; Pulvermacher, B.: J. Catal. 37, 416 (1975).
Borisova, M. S.; Fenelonov, V. B.; Dzisko, V. A.; Simonova, L. G.: Kinet. Katal. 17, 653 (1976).
Sememov, N. N.: Einige Probleme der chemischen Kinetik und Reaktionsfähigkeit, Akademie Verlag, Berlin 1961.
Albright, L. F., Crynes, B. L.; Corcoran, W. H., eds.: Pyrolysis, Theory and Practice, Academic Press New York 1983.
Karim, G. A.; Metwally, M. M.: Adv. Hydrogen Energy Syst. 2, 937 (1979).
Kemball, C.: Catal. Rev. 5, 33 (1971).
Frennet, A.; Lienard, G.; Crucq, A.; Degols, L.: J. Catal. 53, 150 (1978).
Leach, H. F.; Mirodatos, C.; Whan, D. A.: J. Catal. 63, 138 (1980).
Martin, G. A.; Imelik, B.: Surface Sci. 42, 157 (1974).
Chahar, B. S.; Hightower, J. W.: J. Catal. (in press).
Martin, G. A.: J. Catal. 60, 345 (1979).
Babernics, L.; Guczi, L.; Matusek, K.; Sarkany, A.; Tétényi, P.: In: Proc, 6th Int. Congr. Catal. London 1976. (Bond, G. C., Wells, P. B., and Tompkins, F. C., eds.), The Chemical Society, London 1976, p. 456.
Sinfelt, J. H.: Catal. Rev. 3, 175 (1969).
Boudart, M.: AIChE J. 18, 465 (1972).
Machiels, C. J.; Anderson, R. B.: J. Catal. 58, 268 (1979).
Maire, G.; Anderson, J. R.; Johnson, B. B.: Proc. Roy. Soc. A 320, 227 (1970).
Legare, P.; Maire, G.: J. Chim. Phys. Physicochim, Biol. 68, 1206 (1971).
Schouten, F. C.; Gijzeman, O. L. J.; Bootsma, G. A.: Surface Sci. 87, 1 (1979).
Martin, G. A.; Dalmon, D. A.: C. R. Acad. Sci. Ser. C 286, 127 (1978).
Lehwald, S.; Ibach, H.: Surface Sci. 89, 425 (1979).
McNaught, W. G.; Kemball, C.; Leach, H. F.: J. Catal. 34, 98 (1974).
Matsumoto, H.: Shokubai 18, 71 (1976).
Balashova, S. A.; Slovokhotova, T. A.; Balandin, A. A.: Izv. Akad. Nauk. SSSR. Ser. Khim. 2, 275 (1965).
Phillips, T. R.; Mulhall, J.: Turner, G. E.: J. Catal. 15, 233 (1969).
Traply, G.; Parlagh, G.; Rácz, G.; Steingaszner, P.; Székely, G.: Acta Chim. Acad. Sci. Hung. 88, 235 (1976).
Yoshitomi, S.; Morita, Y.; Yamamoto, K.: Bull. Jap. Petrol. Inst. 4, 15 (1962).
Treiger, L. M.; Rabinovitch, G. L.; Moslanski, G. N.: Dokl. Akad. Nauk. SSSR 209, 130 (1973).
Rostrup-Nielsen, J. R.; Tøttrup, P. B.: In: Symposium on Science of Catalysis and its Application in Industry FPDIL, Sindri 1979, p. 380.
Traply, G.; Parlagh, G.; Rácz, G.; Steingaszner, P.; Székely, G.: Acta. Chim. Acad. Sci. Hung. 88, 223 (1976).
Jackson, S. D.; Thomson, S. J.; Webb, G.: J. Catal. 70, 249 (1981).
Schnell, C. R.: J. Chem. Soc. (B) 158 (1970).
Akers, W. W.; Camp, D. P.: AIChE J. 1, 471 (1955).
Bodrov, I. M.; Apel’baum, L. O.; Temkin, M. I.: Kinet. Katal. 8, 821 (1967).
Allen, D. W.; Gerhard, E. R.; Linkins Jr., M. R.: Brit. Chem. Eng. Proc. Tech. 17, 605 (1972).
Rostrup-Nielsen, J. R.: J. Catal. 85, XXX (1984).
Bodrov, I. M.; Apel’baum, L. O.; Temkin, M. I.: Kinet. Katal. 5, 696 (1964).
Bodrov, I. M.; Apel’baum, L. O.: Kinet. Katal. 8, 379 (1967).
Bodrov, I. M.; Apel’baum, L. O.; Temkin, M. I.: Kinet. Katal. 9, 1065 (1968).
Khomenko, A. A.; Apel’baum, L. O.; Shub, F. S.; Temkin, M. I.: Kinet. Katal. 11, 1480 (1970).
Khomenko, A. A.; Apel’baum, L. O.; Shub, F. S.; Snagovskii, Y. S.; Temkin, M. I.: Kinet. Katal. 12, 423 (1971).
Boudart, M.; Djega-Mariadasson, G.: Kinetics of Heterogeneous Catalytic Reactions, Princeton University Press (in press), Princeton 1983.
Temkin, M. I.: Int. Chem. Eng. 11, 709 (1971).
Agranat, B. D.; Leibush, A. G.; Semenov, V. P.: Kinet. Katal. 17, 1241 (1976).
Ross, J. R. H.; Steel, M. C. F.; Zeini-Isfahani, A.: In Mechanisms of Hydrocarbon Reactions. (Marta, F.; Kalló, D.; eds.). Budapest 1975.
Bhatta, K. S. M.; Dixon, G. M.: Ind. Eng. Chem. Prod. Res. Develop. 8, 324 (1969).
Rostrup-Nielsen, J. R.: Chem. Eng. Prog. 73,(9) 87 (1977).
Licka, S.: Thesis, Vyscká Skola Chemico-Technologická Prag 1971.
Meshenko, N. T.; Veselov, V. V.; Shub, F. S.; Temkin, M. I.: Kinet. Katal. 18, 962 (1977).
Figueiredo, J. L.; Trimm, D. L.: Rev. Port. Quim. 19, 363 (1977).
Bhatta, K. S. M.; Dixon, G. M.: Trans. Faraday Soc. 63, 2217 (1967).
Saito, M.; Tokuno, M.; Ichiro, A.; Morita, Y.: Kogyo Kagaku Zasshi 73, 2405 (1970).
Balashova, S. A.; Slovokhotova, T. A.; Balandin, A. A.: Kinet. Katal. 7, 303 (1966).
Kato, A.; Ogino, Y.: Bull. Jap. Petrol. Inst. 15, 115 (1973).
Tøttrup, P. B.: Appl. Catal. 4, 377 (1982).
Allen, D. W.; Gerhard, E. R.; Linkins Jr., M. R.: Ind. Eng. Chem. Proc. Design Devel. 14, 256 (1975).
Grenoble, D. C.; Estadt, M. M.; Ollis, D. F.: J. Catal. 67, 90 (1981).
Nielsen, B.: (unpublished results).
Brooks, C. S.; Golden, G. S.; Lemkey, F. D.: Surface Technol. 11, 333 (1980).
Kikuchi, E.; Ito, K.; Morita, Y.: J. Japan Petrol. Inst. 22(2) 73 (1979).
Somorjai, G. A.: J. Elektrochem. Soc. 124, 205C (1977).
Nieuwenhuys, B. E.; Sachtler, W. M. H.: J. Colloid Interface Sci. 58, 66 (1977).
Ross, J. R. H.; Steel, M. C. F.; Zeini-Isfahani, A.: J. Catal. 52, 280 (1978).
Vannice, M. A.: Catalytic Activation of Carbon Monoxide on Metal Surfaces. In: Catalysis: Science and Technology vol. 3 (Anderson, J. R. and Boudart, M. eds.), Springer-Verlag, Berlin Heidelberg New York, 1982, p. 139.
Cimino, A.; Boudart, M.; Taylor, H.: J. Phys. Chem. 58, 796 (1954).
Schoubye, P.: J. Catal. 14, 238 (1969).
Campbell, C. T.; Goodman, D. W.: Surface Sci. 123, 413 (1982).
Ertl, G.; Weiss, M.; Lee, S. B.: Chem. Phys. Lett. 60, 391 (1979).
Kikuchi, E.; Tanaka, S.; Yamazaki, Y.; Morita, Y.: Bull. Japan Petrol. Inst. 16, 95 (1974).
Münster, P.; Grabke, H. J.: Bunsenges, Phys. Chem. 84, 1068 (1980).
Veijola, V.; Kinnari, P.; Alaaho, P.; Harkonen, M.: Kem.-Kemi 3, 173 (1976).
Barcicki, J.; Denis, A.; Grzegorizyk, W.; Nazimek, D.; Borowiecki, T.: React. Kinet. Catal. Lett. 5, 471 (1976).
Kikuchi, E.; Ito, K.; Ino, Y.; Morita, Y.: J. Catal. 46, 382 (1977).
Kikuchi, E.; Ito, K.; Morita, Y.: Wasada Daigaku Rikogaku Kenkyusho Hokoku 83, 86 (1978).
Takami, K.; Igarashi, A.; Ogino, Y.: Bull. Japan Petrol. Inst. 19, 37 (1977).
Rabinovitch, G. L.; Mozhaiko, V. N.: Neftekhimiya 15, 373 (1975).
Koechloefl, K.: Proc. 6th Int. Congr. Catal. London 1976 (Bond, G. C.; Wells, P. B.; and Tompkins, F. C.; eds.). The Chemical Society, London 1976, p. 1122.
Morita, Y.; Osawa, N.; Fukase, S.; Yamakazi, S.; Kikuchi, E.: J. Japan Petrol. Inst. 20, 142 (1977).
Tomita, T.; Moriya, A.; Shinjo, T.; Kikuchi, K.; and Sakamoto, T.: J. Japan Petrol. Inst. 23, 69 (1980).
Tomita, T.: (private communication).
Bridger, G. W.; Wyrwas, W.: Chem. Process Eng. 48, 101 (1967).
Kjær, J.: Computer Methods in Catalytic Reactor Calculations, Haldor Topsøe, Vedbæ 1972.
Jarvan, J. E.: Ber. Bunsenges. Phys. Chem. 74, 142 (1970).
Phillips, T. R.; Yarwood, T. A.; Mulhall, J.; Turner, G. E.: J. Catal. 17, 28 (1970).
Coad, J. P.; Riviere, J. C.: Surface Sci. 25, 609 (1971).
Baker, R. T. K.; Harris, P. S.: In: Chemistry and Physics of Carbon Vol. 14 (Walker, P. L., Jr.; Thrower, P. A., eds.), Dekker, New York 1978, p. 83.
Rostrup-Nielsen, J. R.; Trimm, D. L.: J. Catal. 48, 155 (1977).
Hofer, L. J. E.; Sterling, E.; McCartney, J. T.: J. Phys. Chem. 59, 1153 (1955).
Baker, R. T. K.; Harris, P. S.; Thomas, R.; Waite, R.: J. Catal. 30, 86 (1973).
Rostrup-Nielsen, J. R.: J. Catal. 27, 343 (1972).
Baker, R. T. K.; Sherwood, R. D.; Simoens, A. J.; Derouane, E. G.: In: Metal-Support and Metal-Additive Effects in Catalysis. (Imelik, B.; Naccache, C.; Courdier, G.; Praliaud, H.; Meriaudeau, P.; Gallezot, P.; Martin, G. A.; and Vedrine, J. C.; eds.), Elsevier, Amsterdam 1982, p. 149.
Baird, T.; Fryer, J. R.; Grant, B.: Carbon (Oxford) 12, 591 (1974).
Robertson, S. D.: Carbon (Oxford) 8, 365 (1970).
Rostrup-Nielsen, J. R.: J. Catal. 33, 184 (1974).
Butt, J. B.: Adv. Chem. Ser. 109, 259 (1972).
Figueiredo, J. L.; Trimm, D. L.: Proc. 4th London Int. Carbon-Graphite Conf. 1974, p. 314.
Baker, R. T. K.; Barber, M.; Harris, P.; Feates, F.; Waite, R.: J. Catal. 26, 51 (1972).
Figueiredo, J. L.; Trimm, D. L.: J. Appl. Chem. Biotechnol. 28, 611 (1978).
Lobo, L. S.; Trimm, D. L.: J. Catal. 29, 15 (1973).
Lobo, L. S.; Trimm, D. L.; Figueiredo, J. L.: Proc. 4th Int. Congr. Catalysis Palm Beach 1972, Hightower, J. E., (ed) North-Holland Publ., Amsterdam 1973, p. 1125.
Tøttrup, P. B.: J. Catal. 42, 29 (1976).
Rostrup-Nielsen, J. R.: (unpublished results).
Massaro, T. A.; and Petersen, E. E.: J. Appl. Phys. 42, 5534 (1971).
Lander, J. J.; Kern, H. E.; Beach, A. L.: J. Appl. Phys. 23, 1305 (1952).
Holstein, W. L.; Boudart, M.: Lat. Am. J. Chem. Eng. Appl. Chem. (in press).
Wada, T.; Wada, H.; Elliott, J. F.; Chipman, J.: Metal. Trans. 4, 2199 (1971) Lat. Am. J. Chem. Eng. Appl. Chem. (in press).
Nishiyama, Y.; Tamai, Y.: J. Catal. 33, 98 (1974).
Bernardo, C.; Trimm, D. L.: Carbon (Oxford) 14, 225 (1976).
Cunningham, R. E.; Gwathmey, A. T.: Advan. Catal. 9, 25 (1957).
Eizenberg, M.; Blakely, J. M.: J. Chem. Phys. 71, 3467 (1979).
Lobo, L. S.: Acta Cient, Venez., Supl. 24, 219 (1973).
Moseley, F.; Stephens, R. W.; Stewart, K. D.; Wood, J.: J. Catal. 24, 18 (1972).
Frennet, A.; Lienard, G.: Surface Sci. 18, 80 (1969).
Presland, A. E. B.; Walker, Jr.: P. L.: Carbon (Oxford) 7, 1 (1969).
Whalley, L.; Davis, B. J.; Moss, R. L.: Trans. Far. Soc. 66, 3143 (1970).
Lahaye, J.; Badie, P.; Ducret, V.: Carbon (Oxford) 15, 87 (1977).
Sundaram, K. M.; Froment, G. F.: Chem. Eng. Sci. 34, 635 (1979).
de Blieck, J. L.; Grosens, A. G.: Hydrocarbon Process. 50,(3) 76 (1971).
Zdonik, S. B.; Green, E. J.; Haller, L. P.: Oil Gas J. 65, 96 (1967).
Mizuno, K.; Ikeda, M.; Imokawa, T.; Take, J.; Yoneda, Y.: Bull. Chem. Soc. Japan 49, 1788 (1976).
Hayward, D. O.; Trapnell, B. M. W.: Chemisorption Butterworths, London 1964.
Freel, J.; Galway, A. K.: J. Catal. 10, 277 (1968).
Cohon, J. W.: Hydrocarbon Process. 60,(1) 177 (1981).
Dent, F. J.; Cobb, J. W.: J. Chem. Soc. 2, 1903 (1929).
Ovenston, A.; Wells, J. R.: Chem. Eng. Sci. 37, 1 (1982).
Williams, D. S.; Möller, R.; Grabke, H. J.: High Temp. Sci. 14, 33 (1981).
Borowiecki, T.: Appl. Catal. 4, 223 (1982).
Misra, J.; Pandey, N. K.; Mukherjee, D. K.; Sen, S. P.: In: “Symposium on Science of Catalysis and its Application in Industry”, FPDIL, Sindri 1979, p. 325.
Bernardo, C.: Ph. D. Thesis (Univ. of London) 1977.
Figueiredo, J. L.; Trimm, D. L.: J. Catal. 40, 154 (1975).
Baker, R. T. K.; Sherwood, R. D.: J. Catal. 70, 198 (1981).
Otto, K.; and Shelef, M.: Proc. 6th. Int. Congr. Catalysis, London, 1976, (Bond, G. C.; Wells, P. B.; and Tompkins, F. C., eds.), The Chemical Society, London 1977, p. 1082.
Cabrera, A. L.; Heinemann, H.; Somerjai, G. A.: Chem. Phys. Letters 81, 402 (1981).
Sen, S. P.: (private communication).
Bernardo, C.; Trimm, D. L.: Carbon (Oxford) 17, 115 (1979).
Rostrup-Nielsen, J. R.: In: Progress in Catalyst Deactivation (Figueiredo, J. L., ed.) Martinus Nijhoff Publ. The Hague 1982, p. 127.
Alstrup, I.; Rostrup-Nielsen, J. R.; Røen, S.: Appl. Catal. 1, 303 (1981).
Rostrup-Nielsen, J. R.: In: “Progress in Catalyst Deactivation” (J. L. Figueiredo, ed.), Martinus Nijhoff Publ. The Hague 1982, p. 209.
Wentrcek, P. W.; McCarthy, J. G.; Ablow, C. M.; Wise, H.: J. Catal. 60, 257 (1980).
Bartholomew, C. H.; Wheaterbee, G. D.; Jarvi, G. A.: J. Catal. 60, 257 (1979).
Christiansen, L. J.; Andersen, S. A.: Chem. Eng. Sci. 35, 314 (1980).
Morita, S.; Inoue, T.: Int. Chem. Eng. 5, 180 (1965).
Gorring, R. L.; De Rosset, A.: J. Catal. 3, 341 (1964).
Mol, A.: Hydrocarbon Process. 53,(2) 115 (1974).
Trimm, D. L.; Holmen, A.; Lindvang, O.: J. Chem. Tech. Biotechnol. 31, 311 (1981).
Grabke, H. J.; Möller, R.; Schnaas, A.: Werkstoffe u. Korrosion 30, 794 (1979).
Sickafus, E. N.: Surface Sci. 19, 181 (1970).
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 1984 Springer-Verlag, Berlin, Heidelberg
About this chapter
Cite this chapter
Rostrup-Nielsen, J.R. (1984). Catalytic Steam Reforming. In: Anderson, J.R., Boudart, M. (eds) Catalysis. Catalysis, vol 5. Springer, Berlin, Heidelberg. https://doi.org/10.1007/978-3-642-93247-2_1
Download citation
DOI: https://doi.org/10.1007/978-3-642-93247-2_1
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-642-93249-6
Online ISBN: 978-3-642-93247-2
eBook Packages: Springer Book Archive